Used Minarctig Evo for sale (637)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Heidenhain, controller model: TNC 7, workpiece weight (max.): 300 kg, rotational speed (max.): 100 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, mount diameter: 80 mm, tool length: 300 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Top 5-axis machine with torque drives in B and C axes, optionally with BLUM laser, tool measurement, internal coolant up to 60 bar, belt filter, further options on request, automation is also possible. Lsdpfoyucq Hex Ab Tehd

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Lsdpjylirlsfx Ab Tjhd

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table load: 1,500 kg, rotary table diameter: 700 mm, rotational speed (max.): 800 rpm, overall weight: 12,000 kg, spindle speed (max.): 17,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MILLING/TURNING CENTER, HSK 63T, Heidenhain, 90 tools Swivel Milling Head: Lhodpfxeylnq Te Ab Tod - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 17,000 rpm - 154 Nm torque - Drive power 29 kW - Separate spindle cooling for consistent temperature - Tool holder HSK-T63 with air blast function Integrated Rotary Table: - With torque motor and hydraulic clamping - Speed 800 rpm - Diameter 700 mm - Extended clamping surface 1,600 x 700 mm General Features: - Heidenhain glass scales on all 5 axes - 90-position tool changer with double-arm gripper - Coolant and compressed air pistol - Chip conveyor - Coolant system - Electronic handwheel - Work area lighting - Ergonomic control console

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 24 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 4,500 rpm, overall weight: 7,600 kg, swing diameter over bed slide: 600 mm, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Top new machine, "THE TANK" with Siemens 828 Shopturn, BMT65 (MORI), Renishaw probe arm, and sub spindle. Available with automation at extra cost (see pictures). - Siemens 15.6'' touch display - Main spindle 3,500 rpm - Siemens motor - Box guideways with Turcite coating - 12-station BMT turret for 12 driven tools - 3-jaw chuck Ø 250 mm on main spindle - 3-jaw chuck Ø 150 mm on sub spindle - C-axis - Y-axis - Sub spindle - Chip conveyor - Coolant system and high-pressure (IKZ), 20 bar - Work area lighting Ljdoylnb Sspfx Ab Tshd - Foot pedal for chuck - Multi-colour machine status indicator Pictured AGWs are not included in the offer.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 770 mm, turning length: 740 mm, turning diameter: 570 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 820 mm, spindle motor power: 36,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, overall weight: 8,800 kg, swing diameter over bed slide: 770 mm, bar passage: 91 mm, chuck outer diameter: 305 mm, Equipment: rotational speed infinitely variable, Top new machine, "DER PANZER" with Siemens 828 Shopturn, Renishaw measuring arm, tailstock Lhsdpfxeylm Rrj Ab Tsd

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Lsdpfx Aboxu I R Ds Tehd Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: good (used), Year of construction: 2016, Vertical Machining Center Machine type: MTCut MVY150H Control: Heidenhain iTNC 530 SmarT.NC Year of manufacture: 2016 Spindle operating hours: 7,140 h Power-on hours: 21,774 h New spindle TECHNICAL DATA: Travel distances: X-axis: 1,500 mm Y-axis: 700 mm Z-axis: 810 mm Rapid traverse (X/Y/Z): 68 m/min. Max. spindle speed: 18,000 rpm Torque: 162 Nm Drive power: 34 kW Tool holder: HSK 63 Tool stations: 40 Table size: 1,500 x 800 mm Features: Chip conveyor Through-spindle air Electronic handwheel Lhsdpfxox Uqrge Ab Tsd Chip flushing gun Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe: TS460

Condition: like new (used), Year of construction: 2022, operating hours: 1,260 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: Siemens, controller model: 828D ShopMill, table width: 610 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Inspection possible near Bonn Lhedexwufaspfx Ab Ted - 12,000 rpm - Separate spindle cooling for constant temperature - Tool holder DIN ISO SK40 with blow-out function - 30-position tool changer with double-arm gripper – tool change time 1.8 sec - Thread cutting without compensation chuck - Roller guides - Coolant and compressed air gun - Screw chip conveyor - Coolant unit - Compressed air cooling for dry machining - Electronic handwheel - Work area lamp

Year of construction: 2021, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 210000002, Industrial vacuum cleaner with integrated liquid bath separator Dust class H/Type 22 400 volts, 2,200 watts 60 l dirt container Air volume max: 330 m³/h Vacuum pressure max: 240/300 mbar Filter levels: 1st filter level: liquid bath separator 2nd filter level: demister 3rd filter level: VA filter 1m² 4th filter level: H14 filter cartridge 2mEX-protected for use in zone 22 according to EN 60335-2-69 including appendix AA and EN 62487 as well as ATEX 2014/34/EU incl. 3.5 m ESD-PUR suction hose Ø40mm electr. conductive with VA-Kamlock coupling, crack nozzle Lhodpfx Aovt Aghsb Tjd Serial number 21000002 LxWxH: 83X68X165cm 1.00 piece 072-0401-ESD ESD extraction arm Ø50mm x length 1,500mm, table mounting 030902 certified according to IEC 61340-5-1, 3 joints 1.00 piece ESD flat hood Ø50mm, 300x200mm including hood pipe connector, certified according to IEC 61340-5-1 SET: console for extraction arm Ø50mm Material: ST/K

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 2,000 kg, rotary table diameter: 800 mm, overall weight: 18,600 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 34,000 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, As-new demonstration machine, laser, probe, configurable through coolant (IKZ) Lsdpoxbzyrofx Ab Tjhd

Condition: used, Year of construction: 2013, operating hours: 15,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Ledpoxdbvxefx Ab Tohd

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386V11914, Year of construction: 2019, operating hours: 5,993 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lsdpfx Ajytn T Rob Tehd Load capacity: 1,600 kg Lift height: 4,625 mm Overall height: 2,121 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Version: 3-wheel electric Battery: 48 V, 625 Ah, tested very good performance at 50.1 V Operating hours: 5,993 h EQUIPMENT Former Linde full-service unit UVV inspection valid until 02/2027 Next service due 02/2027 or in 1,000 operating hours All dimensions are rounded figures. No liability for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email proof of payment! Collection WITHOUT further registration possible Monday to Friday 7:00 am to 4:30 pm. A mast that is too high can be dismantled for transport upon request. In case of delayed collection, a storage fee of €20 per machine per day will be charged (payment must be settled prior to pickup).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2Y394L01382, Year of construction: 2022, operating hours: 4,782 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,900 mm Free lift: 150 mm Lhjdpfeytn I Iox Ab Ted MACHINE DETAILS Mast type: Standard Drive type: LPG Battery: 12 V starter battery Operating hours: 4,782 h EQUIPMENT Former Linde full-service unit Safety inspection (UVV) until 02/2027 Next service due in 518 operating hours Note: Mast removal costs €750 net. All dimensions are approximate. No liability is assumed for any writing or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment from Monday to Friday, 7:00 am to 4:30 pm. If the mast is too high for transport, it can be dismantled on request. If the machine is not collected within the agreed deadline, a storage fee of €20 per machine per day applies (additional charges must be paid before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386J08866, Year of construction: 2018, operating hours: 4,387 h, load capacity: 1,500 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 01/2027, Equipment: UVV, Service + UVV 01/2027 1,500kg Duplex 314cm Electric Forklift, 4,387 hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 3,140 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 4,387 h Mast type: Duplex Drive: Electric Battery: 13/08/2018 24V 8PzS 1000Ah, measured at 24.6V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,100 x 2,121 mm Weight: 3,100 kg EQUIPMENT Ex-Linde full-service machine Facelift model with tilt angle display 3rd valve, side shifter Front LED work light Rear LED work light Rear safety light Lhodpoyuurcsfx Ab Tsd Comfort seat All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side possible up to 5 t with large onsite forklift at buyer’s own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday, 7:00–16:30. A mast that is too high for transport can be dismantled on request. If not collected within the agreed time, a storage fee of €20 per machine per day will apply (payable prior to collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2018, operating hours: 3,265 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,100 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,600 kg Triplex 410 cm 3rd + 4th Valve Electric Forklift 3,265 Operating Hours No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Free lift: 1,500 mm Lift height: 4,100 mm Mast type: Triplex Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,265 h Mast type: Triplex Drive type: Electric Battery: 48 V, 625 Ah Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,100 mm Weight: 3,400 kg Ljdjyufrmjpfx Ab Tehd FEATURES Former Linde full-service machine Facelift model with tilt angle display Triplex mast with full free lift 3rd valve for side shifter 4th auxiliary valve open for fork positioner White non-marking tires Front LED work lights Rear safety light Comfort seat All dimensions are rounded values. No liability accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Pickup ONLY with email confirmation of payment! Pickup WITHOUT prior notice: Monday to Friday 7:00 am – 4:30 pm. If the mast is too high, it can be disassembled for transport upon request. If pickup is not made within the agreed timeframe, a storage fee of €20 per machine per day will be charged (the outstanding amount must be paid before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2019, operating hours: 13,213 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV 02/2027 1,400kg Duplex Free Lift Electric Forklift No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 3,145 mm Free lift: 1,519 mm Fork length: 1,200 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 13,213 h Mast type: Duplex Drive type: Electric Battery: 48 V 500 Ah, measured at 49.5V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,100 x 2,121 mm Lhedjyufbhjpfx Ab Tsd Weight: 3,100 kg EQUIPMENT Former Linde full-service unit Duplex mast with full free lift 3rd valve with sideshift Load guard (can be easily removed) All dimensions are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on-site, at buyer’s own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT appointment Monday to Friday 7:00 am–4:30 pm. High masts can be dismantled for transport on request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day applies (payment due before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2019, operating hours: 3,446 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,519 mm, mast type: duplex, construction height: 2,121 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + UVV until 03/2027, Battery 19/2022 No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,140 mm Fork length: 1,800 mm Free lift: 1,519 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 3,446 h Drive type: Electric Battery: 19/2022 48V 750A, 49.6V (very good performance!) Mast type: Duplex Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,121 mm Weight: 3,500 kg EQUIPMENT Former Linde full-service unit Valve side shifter Duplex mast with full free lift Ljdeyud Slspfx Ab Tjhd All measurements are approximate. No liability for typing or measurement errors. COLLECTION TERMS Side loading up to 5 t possible onsite with a large forklift at buyer's own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment, Monday to Friday 7:00–16:30. A mast that is too high for transport can be dismantled upon request. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged (outstanding payment must be settled before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2020, operating hours: 16,254 h, load capacity: 5,000 kg, lifting height: 5,400 mm, free lift: 150 mm, construction height: 3,720 mm, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, 5,000 kg Service + Safety Inspection (UVV) 02/2027 3rd & 4th Valve Fork Positioner AC Air Conditioning Diesel Forklift Truck No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 5,400 mm Fork length: 2,400 mm Free lift: 150 mm Design: Counterbalance forklift MACHINE DETAILS Operating hours: 16,245 h Mast type: Clear-view Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,800 x 1,450 x 3,720 mm Weight: 7,700 kg FEATURES Ex-Linde service machine Current service performed, next due in 755 hours Full cab with air conditioning, heating, and windscreen wiper Clear-view mast without central hydraulic cylinder 3rd & 4th valve for fork positioner with sideshift Note: Dismantling of the mast can optionally be offered by the seller for €950 net. All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large onsite forklift at your own risk. Ledpsyudkbsfx Ab Tehd Collection ONLY with emailed payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too high can be dismantled for transport upon request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payment of arrears required before collection).

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm Lhjdpoyvkuqsfx Ab Tod travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: used, functionality: limited functionality, Year of construction: 2017, operating hours: 1,180 h, Drive concept: H-DRIVE (diesel-hydraulic) Transport dimensions: 16,525 x 3,200 x 3,400 mm (L x W x H) Discharge conveyor overflow lower deck (medium fraction): 650 x 10,200 mm (W x L), discharge height 5,000 mm Discharge conveyor overflow middle deck (medium fraction): 650 x 10,200 mm (W x L), discharge height 5,000 mm Discharge conveyor overflow upper deck (oversize): 500 x 8,900 mm (W x L), discharge height 5,020 mm Fine discharge conveyor: 1,200 x 6,600 mm (W x L), discharge height min/max: 3,300/4,500 mm Belt conveyor fine fraction extraction: 650 x 1,800 mm (W x L) Screen unit type: triple-deck classification screen Upper deck dimensions: 1,550 x 4,500 mm (W x L) Max. feed size: 160 x 100 x 60 mm Feed height: 2,520 mm Feed height – foldable bar grate: 3,580 mm Lhjdpfsyvfczox Ab Tsd Feed capacity up to approx.: 350 t/h Hopper volume: 8 m³ Feed conveyor: 1,200 x 10,300 mm (W x L)

Condition: used, Year of construction: 2013, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm 110 mm 95 mm 135 x 60 mm 120 mm 100 mm 135 x 60 mm 180 mm dimensions of saw-blade 350 x 32 x 3,4 mm Lodpfx Aeyvvqdjb Tshd machine weight ab. 600 kg

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW weight 615 kg Lodpfx Asyvvpaob Tehd Overall size 1400x1400x2000 mm

Condition: used, Year of construction: 2006, dimensions of saw-band 2950x27x0,9 mm 15-100 m/min 285 mm capacity 90 degrees: square 220 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 280x220 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm Lsdeyvvm Eopfx Ab Tehd capacity 45 degrees: flat 220x200/200x140 mm total power requirement 2,2 kW Weight 990 kg Overall size 2500x2230x2050 mm Accessories / equipment: - Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mm

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,120 h, load capacity: 3,500 kg, lifting height: 4,655 mm, free lift: 1,424 mm, fuel type: diesel, mast type: triplex, construction height: 2,191 mm, power: 44 kW (59.82 HP), fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load centre: 600 mm Ledpfeyq T Eaex Ab Tohd ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Technical condition: very good Front tyre condition: 60 - 80% Rear tyre condition: 60 - 80% Sideshift, fork positioner, Cascade Rotating Fork Clamp 52G-TMS-B513L RO 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, CE certificate, LED, The forklift is container-capable!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Saw blade diameter: 370x32x3 mm 4 speeds: 15-150 rpm Vice: 190 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 180x100 mm Cutting range at 60 degrees left: round 115 mm Cutting range at 60 degrees left: square 90 mm Cutting range at 60 degrees left: flat 90x90 mm Cutting range at 45 degrees left: round 115 mm Cutting range at 45 degrees left: square 100 mm Cutting range at 45 degrees left: flat 120x100 mm Cutting range at 45 degrees right: round 115 mm Cutting range at 45 degrees right: square 100 mm Cutting range at 45 degrees right: flat 120x100 mm Total power requirement: 5.5 kW Weight: 615 kg Machine dimensions: 1400x1400x2000 mm Electropneumatic, semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on precision linear double ball bearing guides - Three-speed gearbox - Infinitely variable speeds from 15-150 rpm - Vice opening 190 mm - Stroke of saw head programmable directly from the control panel, for adjustment to cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile material - Vice with counterhold device for double clamping of the workpiece - Base frame with removable coolant tray - Chip removal brush - Length stop for repeat length cutting - Material support arm, also suitable for connecting conveyor track/loading side - Machine designed for pallet truck transport - Includes tools and operating manual Electrical equipment: - Control panel - Marked cable connections - Indicator light for operational readiness - Main safety switch - LED check indicator on control panel to monitor machine functions - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle with IP 55 protection - Low voltage system 24 Volt - Electrical coolant system for saw blade lubrication and cooling (micro-spray device can be fitted) Lodoyvt Nkspfx Ab Tjhd - Motor 5.5 kW - 400 Volt