Used Minarctig Evo for sale (620)

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm weight of the machine ca. 7150 kg Dkodpfx Apsy Nd U Rjwsr

Condition: used, functionality: fully functional, ISC Recycle offers you a used, high-performance, and carefully selected refrigerated compressed air dryer to guarantee clean and dry air in your industrial networks. Model: PARTENAIR EVO-BLUE-145 Dkodpfx Apjzgtdgjwer Condition: Used Dew point: +3°C under pressure (ISO 8573-1: 2001 Class = 4) Technology: Proportional power regulation for perfect dew point stability Refrigerant: Environmentally friendly refrigerant with low global warming potential (GWP) Performance: Extremely low pressure drop, guaranteeing optimal energy savings Do not hesitate to contact us for more information.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm Dedpozapxzjfx Apwskr

Condition: used, functionality: fully functional, machine/vehicle number: H2X386J07960, Year of construction: 2018, operating hours: 5,630 h, load capacity: 2,000 kg, lifting height: 5,475 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, fork length: 1,200 mm, empty load weight: 3,579 kg, drive type: Elektro, Electric 3-Wheel Forklift Chassis Number: H2X386J07960 Load Centre: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tire Type: Non-marking Front Tire Condition: 80 - 100% Rear Tire Type: Non-marking Dksdpfx Asumphzjpwor Rear Tire Condition: 80 - 100% Battery Voltage: 48V Battery Capacity: 750Ah Battery Year: 2018 Battery Condition: 60 - 80% Description: Workshop inspected with UVV certification Sideshift, 3rd Valve, Rear work lights, Front work lights, Roof cover, Windscreen, Road homologation (STVZO), Full cabin, CE certificate, Scale, Joystick, Full cabin with weighing system, light-colored tires, vehicle lighting, front & rear work lights, non-marking tires.

Condition: used, functionality: fully functional, machine/vehicle number: H2X392J01741, Year of construction: 2018, operating hours: 7,150 h, load capacity: 2,000 kg, lifting height: 3,270 mm, free lift: 1,500 mm, fuel type: diesel, mast type: duplex, construction height: 2,210 mm, fork length: 1,200 mm, empty load weight: 3,635 kg, drive type: Diesel, Diesel forklift Chassis number: H2X392J01741 Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Djdpfx Apjzgpb Uowokr Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Workshop-inspected with UVV approval Side shifter, 3rd valve, rear work light, front work light, half cabin, CE certificate, interior mirror, windshield wiper, single-pedal operation, 4 headlights in front, 1 headlight in the rear, BlueSpot in the rear, door on the right, flashing beacon

Condition: used, Year of construction: 2021, Technical details: feed pressure: 8 bar liter capacity: 620 l total power requirement: 4 kW sound level: 63 dB(A) revolutions per minute of the motor:: 920 Number of cylinders: 2 electrics - voltage/frequency: 400/50 V/Hz Pressure max.: 14,5 bar Number of working hours: 2195 h machine weight approx.: 194 kg dimensions L x W x H: 1,24 x 0,85 x 1,20 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. Dsdpfoxrdw Ijx Apwjkr *

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 8,121 h, load capacity: 4,500 kg, lifting height: 6,015 mm, free lift: 2,114 mm, fuel type: diesel, mast type: triplex, construction height: 2,926 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Speed class: 20 Condition: Refurbished, no warranty Technical condition: good Front tire type: Superelastic Front tire size: 300-15 Front tire condition: 40 - 60% Dksdozf Sakopfx Apwer Rear tire type: Superelastic Rear tire size: 250-15 Rear tire condition: 40 - 60% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing & financing options. We will be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing a device from us. The stated operating hours were recorded as of the date of listing. Subject to prior sale, changes, and errors. Fork carriage, side shifter, integrated side shifter 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, STVZO compliant (German Road Traffic Licensing Regulations), full cabin, safety light, LED.

Condition: excellent (used), functionality: fully functional, operating hours: 100 h, KNAPP’s OSR Shuttle™ Evo automated shuttle system, designed for high-performance storage, order picking, and logistics flow management. Dkodpfxjxtawts Apwor This modular system enables flexible, scalable, and energy-efficient operation of modern warehouses. Key technical features: Type: AS/RS (Automated Storage and Retrieval System) Capacity: up to 50 kg per bin Installation height: up to 30 m Throughput: up to 1,000 dual cycles/hour Operation: 1D or 2D, depending on the configuration Components included (depending on configuration): OSR Shuttle™ shuttles High-density racking High-speed vertical lifts Order picking stations Connection accessories (conveyors, power supply, cabling, etc.) Environment: suitable for refrigerated zones (up to –28 °C) Applications: e-commerce, distribution, industry, pharmaceuticals, electronics, etc. Compatible with “goods-to-person” workstations and automated conveyor systems Quantity: 20 Price: €5,400.00 (excluding VAT) per shuttle

Condition: excellent (used), Year of construction: 2006, Specifications Brand: MEP Model: Shark 282 SXI EVO Type: Semi-automatic bandsaw Year of manufacture: 2006 Country of origin: Italy Connection voltage: 400 Volt Motor power: 1.5 / 1.8 kW Cutting capacity, round, at 0°: Ø 250 mm Cutting capacity, rectangular, at 0°: 280 x 220 mm Mitre angle range: 45° to the right, 60° to the left Bandsaw speeds: 36 / 72 m/min Bandsaw blade dimensions: 2950 x 27 x 0.9 mm Material clamping: Hydraulic Cooling system: Yes Misting system: Yes Roller conveyor: Yes Dimensions Length: 1970 mm Width: 1150 mm Height: 2000 mm Djdpjzd Txxofx Apwokr Weight: Approx. 500 kg Roller conveyor, left & right: approx. 4 meters

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Dksdpfx Aev Ux R Sjpwsr

Condition: used, Year of construction: 2011, operating hours: 64 h, functionality: fully functional, Water chiller, MTA, 88.3 kW, model Tae Evo 301, 380III, weight: 775 kg. Inspected equipment, fully charged with refrigerant gas. VAT not included. Shipping throughout Spain and Europe. Shipping costs not included. Reference: 1148. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, oenology, etc. Tested – condition can be verified at our facilities. 2 units available. Djdpfsyfww Nex Apwjkr

Condition: like new (used), functionality: fully functional, Year of construction: 2023, load capacity: 250 kg, mast type: telescopic, lifting height: 16,000 mm, overall weight: 2,940 kg, transport length: 5,840 mm, transport width: 790 mm, transport height: 1,980 mm, fuel type: diesel, ALMACRAWLER Billennium B1890 EVO Q-PRO - Demonstration unit, year of manufacture 2023, in mint condition! Telescopic crawler work platform Max. working height: 18.00 m Dedpewz Ifqsfx Apwekr Max. working height while driving: 9.00 m Max. lateral outreach: 10.90 m / 80 kg Max. load capacity: 250 kg Platform rotation: +/- 70° Slew range: 185° Climbing ability: 20° Drive: Yanmar 2TNV70 diesel engine, 10.2 kW Color: red / black Special features: bright non-marking tracks, large work basket 1.80 x 0.70 m, electric pump 230V Features: - PLC system, operation and driving without outriggers up to 9.00 m height possible - QUICK-PRO, automatic stabilization configuration system, automatic leveling with 6-way variable settings - ATS system, automatic hydraulic track tensioning system - Removable work basket - Cable remote control with color display - Home function - Control panel cover Available ex-stock Langenhagen. All information about the machine is provided without guarantee. Subject to errors, typing mistakes, and prior sale. Leasing offers available through partner companies.

Condition: used, -M4 Soleo Dkjdpfx Apjwxwbpjwjr -Manufacture date: 11/2017 -Dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg

Condition: excellent (used), -M4 Soleo -Overall dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 Dodpfowxx Nnex Apwskr - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: used, -M4 Soleo -Overall dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 Dkodpowx I Utsfx Apwsr - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table Dkjdpfx Apsxgnz Tswor - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, - Dimensions LxWxH: 1441x2830x2682mm - Deck dimensions: 800x1800mm - Baking surface: 5.8m² - Without integrated loader or proofer - 4 ports - 4 decks - Ergocom control, 1 control per deck - Voltage: 400V - Power: 32.8kW - Weight: 1797kg - Top and bottom decks: 20mm thick refractory material on the sole - ROC orion EvO deck 1x800mm - Sole and vault in 20mm thick refractory material, 13mm refractory tiles on sides Dsdpsw Imi Hsfx Apwskr - Interior lighting - High-performance stainless steel heating elements - Integrated heating element protection system in the vault - Independent steam device with water doser for each deck - Pressure reducer - Steam distributed from the rear of the baking chamber, "anti-splash" water diffuser for bread.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 235 h, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 1,172 g, total width: 2,030 mm, total height: 2,350 mm, overall weight: 21,500 kg, product length (max.): 7,110 mm, This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • The machine is like new. Technical Machine Benefits • Injection unit size: 2290 Dkedpsx D Iz Iefx Apwer • - Max. Injection Pressure: 1421 bar- Max. Stroke Volume: 1232 cm3- Max. Shot Weight (PS): 1172 g- Screw Stroke: 320 mm- Carriage Stroke: 400 mm- Nozzle Contact Force: 30 kN- Injection Rate: 580 cm3/s- Injection Speed: 150 mm/s- Screw Speed: 250 ot/min (RPM)- Plasticizing Rate (GPPS): 77 g/s- Effective Screw Length (L/D): 22.9 • - Number of Heating Zones: 4+1- Installed Heating Power: 39.6 kW • Clamping Force: 3500 kN:- Distance Between Tie Bars (H x V): 720 x 720 mm- Platen Dimensions (H x V): 1030 x 1030 mm- Mold Opening Stroke: 675 mm- Max. Daylight: 1475 mm- Min. Mold Mounting Height: 250 mm- Max. Mold Mounting Height: 800 mm- Max. Mold Weight (Moving / Stationary): 2630 / 1320 kg- Max. Total Mold Weight: 3950 kg- Ejector Force: 75 kN- Ejector Stroke: 200 mm Extra Information Machine still under power

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 67137, Technical characteristics: Work Area - Maximum clamping plate diameter: 250 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 886 mm / Rapid traverse X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse Z: 30 m/min - Y-axis travel: -85/+100 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle (Weiss) per DIN 55026: Size A6 - Maximum speed: 5,500 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Secondary Spindle HSK63 - Spindle head size/type: HSK-A63 - Nominal speed: 2,700 rpm / Nominal power: 12 kW / Nominal torque: 42.4 Nm - Maximum speed: 15,000 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Tool Holder with Motorized Tools - Turret VDI40, Siemens-drive 0.5.440.220 (manufacturer: Sauter) - Number of stations: 12 Dkjdpfxexxi Ure Apwsr - Live tool nominal speed: 3,000 rpm / Nominal torque: 33.1 Nm - Live tool maximum speed: 10,000 rpm / Nominal torque: 56.2 Nm - Live tool nominal power at 100% duty cycle: 10.4 kW Electrical Equipment - Operating voltage: 400 V, fused 100A GL - Connected load: 45 kW Dimensions - Overall dimensions: Length = 4,021 mm, Width = 4,709 mm, Height = 3,527 mm - Weight: 8,000 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision with Heidenhain linear scales for X, Y, Z axes - High-power main spindle (Weiss) with a wide speed range - High-power secondary spindle (Weiss), easily accessible for drilling/milling operations - Automated loading/unloading via integrated automation - In-process control probe: Marposs T25 - Live tooling for extended machining capabilities (drilling, milling, etc.) - Chip conveyor: Knoll - Coolant 'paper' filter unit & chiller: Knoll KF150/500 - Electrostatic mist filter: IFS type IFM1000 Machine status: NOT WORKING - Sauter turret replaced with new unit; assembly not complete – turret motor spindle installation still required - Operator panel safety switch needs replacement

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT Dsdpfewlvi Ejx Apwokr table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Dimensions: cm 105 x 95 x h. 89 Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Dkedpfxszgv Hdo Apwsr Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: used, Year of construction: 2024, operating hours: 26 h, machine/vehicle number: SN064871, Options: - RFID chips LiServ 4.0 Dkodpfxszdcxco Apwor - Energy measurement package Balluf Smartlight ME 5000 - Barcode scanner

Condition: used, mileage: 199,526 km, power: 260 kW (353.50 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 15,040 kg, maximum load weight: 10,960 kg, overall weight: 26,000 kg, fuel: diesel, color: orange, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, total length: 9,600 mm, Year of construction: 2016, construction height: 3,500 mm, Equipment: ABS, air conditioning, For sale is a Mercedes-Benz Econic 2635 NGE-L62N equipped with a Zöller Medium X2 evo body. The vehicle was first registered in July 2016 and has a mileage of 199,526 km. It is in well-maintained and operational condition. The truck is powered by a diesel engine with a displacement of 7,698 cc and an output of 260 kW and is fitted with an automatic transmission, providing comfortable and efficient driving. Dkodpfx Ajygyfrspwer Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2013, operating hours: 11,328 h, load capacity: 3,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, Linde Forklift H30D+02 EVO VIN: D54691 * 11,328 operating hours * Solid rubber tires front and rear * Duplex mast * Forks 1200mm * Heater * Air conditioning * Rear-view camera * Radio * Load capacity 3.0 t Djdjyb U Hyspfx Apwskr Other information: * 1 previous owner New main inspections / safety checks or load capacity downgrades/upgrades are available on request. We are also happy to assist you in obtaining export/transfer license plates, and vehicle delivery within Germany is possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide variety of vehicles. Our company philosophy is characterized by fairness and professionalism. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of special transport We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to arrange export/temporary license plates for you. Customs clearance We are happy to assist you with customs procedures.

Condition: used, Year of construction: 2016, operating hours: 2,256 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, construction height: 3,150 mm, gearing type: automatic, Equipment: cabin, head guard, Linde forklift H35D EVO FIN: G04614 * 2,256 operating hours * Tires front and rear solid rubber * Duplex mast * Hydraulic connections for shovel/reversible fork * Fork tines 1200mm * Heating * Radio * Load capacity 3.5 t * Overall height 3.15m Other: Dkjdpet Aqvlsfx Apwsr * 1 previous owner * UVV New general inspections/safety tests or weight reductions/increases are available on request. We are happy to help you obtain export/transfer license plates, and we can also transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sales of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them when buying or selling vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.