Vertical turning lathe

Webster & Bennett EVOLUTION R 48R

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Folhexg Nmksccqljgg Main drive motor: 41 kW Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Fgslhjn Awd Roccqlog Installation height Max. 1,400 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel Fgslhcoykbimecqlog - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT Fjlhjyffigsccqljgg

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min Fslhccqexp Na Nolsgg MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: used, Year of construction: 2004, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export Control: Heidenhain iTNC530 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 10,000 rpm 44kW Spindle mount: HSK-A100 tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 20 bar / 900 l chip conveyor: . probe: Heidenhain TS641 electric handwheel: Heidenhain operating mode: 4 Tool measurement: Blum Laser Fslhozaxmnoccqlogg High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fslhcjy Hq Dyjcqlegg

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty Fgslhccqoyzim Ajlog -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: good (used), Maximum turning diameter with top carriage 1350 mm Maximum turning diameter with side carriage 1100 mm Maximum turning height 1000 to 1250 mm Table diameter 1100 mm Maximum table load 4000 kg Power of main motor 30 kW Table speeds 6.3 - 200 rpm Number of table speeds 16 Distance between floor and table surface 955 mm TOP CART: Vertical travel of the ram with tool holder (Z axis) 600 mm Longitudinal travel of the slide (X axis) 700 mm Number of tool holes in the tool holder 5 Diameter of tool hole 60 mm Working feeds 12; 0,21 - 10 mm/min Fast feed rate 1880 mm/min SIDE CARRIER: Vertical slide travel (R axis) 800 mm Felhccotn S D Aoqlogg Slide travel (P axis) 630 mm CROSS BEAM: Vertical travel 1000 mm Feed rate 500 mm/min

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle diameter: 100 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,120 rpm, total height: 3,000 mm, total length: 6,000 mm, total width: 3,000 mm, table length: 1,250 mm, table width: 1,250 mm, type of input current: three-phase, spindle stroke: 900 mm, overall weight: 14,000 kg, year of last overhaul: 1999, Machine in excellent condition, used only for small operations. Condition of the slides: very good. Its green color is still the original. Fgelhcszunfbjcqlsg Functional and available quickly. Equipped with a Heidenhain visual display and measuring scale, on 4 axes: X/Y/Z/B. Tooling included with this machine: see the photos below. Great deal, priced below market value. Technical specifications: 🔹 Spindle Spindle diameter: 100 mm Spindle taper: ISO 50 Spindle travel (W-axis): 900 mm Rotation speed: 7.1 to 1,120 rpm Main motor power: 11 kW to 15 kW 🔹 Travels X-axis (Longitudinal): 1,600 mm Y-axis (Vertical): 1,120 mm Z-axis (Cross): 1,250 mm W-axis (Spindle travel): 900 mm 🔹 Rotary Table Table surface: 1,250 × 1,250 mm Maximum allowable load on the table: 3,000 kg (3 tons) Table rotation: 360° (manual or motorized) 🔹 Facing Head Facing head diameter: 600 mm Max. boring/facing diameter: 900 mm Facing head speed: 7.1 to 224 rpm Facing head slide travel: 210 mm 🔹 Dimensions and Weight Overall dimensions (L × W × H): ~ 6,000 × 3,000 × 3,000 mm Total machine weight: ~ 14,000 kg (14 tons)