Used Eisele Vms Ii for sale (121)

Year of construction: 2004, condition: used, Technical details: Nodpfx Aou Nit Rehfocu Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Year of construction: 1994, Technical details: Ncedpju Nigkjfx Ahfou saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system * Nedpfsu Niuzox Ahfecu

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Ncjdpfsq Awg Ejx Ahfsu

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Njdpforv A Hmox Ahfscu Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 2000, overall weight: 380 kg, Technical Data Nedpfxjzc R Ebe Ahfecu Usable profile dimensions: 25 – 60 mm Max. profile chamber offset: 40 mm Adjustable punching tools for different profile geometries Continuously adjustable height for plungers, blades, and counter inserts Pneumatic operation Machine weight: approx. 380 kg

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic Ncjdpfjzb Ngzox Ahfju 2 additional saw blades --> --> Special price: EUR 4,000.00 net, free on board!

Condition: good (used), Year of construction: 1967, functionality: fully functional, Metal cut-off saw Type LMS I - Year of manufacture: 1967 - 380 Volt - 1450 rpm; 2950 rpm - 1.8 kW Transport available at an additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers. Ncedexa Hkmspfx Ahfou

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . . Ncodpfx Ahjza Hnmjfou

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Ncedpjzap Hfefx Ahfju

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm Ncodpfx Ahoy Uwpxofeu - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Nodpfjvdk A Esx Ahfecu Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Nsdpfx Asqzmnuehfocu Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Nedpfxoy Dtpmj Ahfscu ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: used, CIRCULAR SAW WITH AUTOFEED Nceds Dv Raepfx Ahfsu Technical characteristics: DIAMETER DISK 380 mms Comments: MAGGOT in GERMANY

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S Ncedsquuufopfx Ahfsu MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Ncedey Tizkjpfx Ahfsu Price: 2,000 Euros

Condition: good (used), Year of construction: 2000, High-performance universal metal circular saw Circular saw - automatic Eisele PSU 450 CNC 2 Njdpfxovxkc Ie Ahfocu Saw blade diameter 450 mm Cutting diameter 150 mm Miter cutting - all positions +/-45° Saw motor 3.6 kW

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Ncedpfx Ahstt Eb Sjfju Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar Ncodpstk Ul Rjfx Ahfsu

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg Nodsfitbwjpfx Ahfjcu

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Ncsdpfxsfcbb Ho Ahfeu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Max. stroke length: 40 mm ■ 25 double strokes/min. Ncsdjy S Abbspfx Ahfju ■ Max. installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table top height: 950 mm ■ Ram force: 90 kN at 10 bar

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Ncsdpfsy S Aa Dox Ahfou Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Condition: excellent (used), LENGTH STOP AND MEASURING SYSTEM Eisele 300mm Nsdpfx Ahjiraqfofscu