Used Elevator for sale (679)

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: None Lodpfx Aezc Ahhsnyoac Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: None Technical condition: New Front tires type: Solid rubber Lajdpozc Ahbsfx Anyec Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: ready for operation (used), RST Elektronik ARC-0 analog phase-angle controller for elevators, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laodpfsi Ec Ecex Anyec

Year of construction: 2011, condition: used, Empty weight: 4.300 kg Serial number: 10111 Equipment: Three-point suspension for agricultural tractor Own weight gripper 1500kg total weight 4300kg Condition: unused Lsdszf Ra Nopfx Anysac Online auction of construction, agricultural and industrial machinery (including. KLEEMANN mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, ATLAS COPCO and CHICAGO PNEUMATIC mobile compressors, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Monday 1 June and closes Tuesday 23 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 22 June Pickup days are on: - Tuesday 30 June - Tuesday 30 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, color: other, operating hours: 66 h, Quick coupler system: Yes Serial number: MMCMLA6JA00060430 Number of hours: 6.6 hours Key present: yes Two speed with speed control + hydraulics 4-point quick-change kit Cab with heating, door and windows Mechanical suspension seat 405/70-20 14-ply diagonal tires Rear counterweight kit (AL600) LED work lights with road illumination Easy Link module Lodezf Nqyepfx Anysac Rear 7-pin socket tow kit Narrow fender kit Unused condition Online auction of construction, agricultural and industrial machinery (including. KLEEMANN mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, ATLAS COPCO and CHICAGO PNEUMATIC mobile compressors, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Monday 1 June and closes Tuesday 23 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 22 June Pickup days are on: - Tuesday 30 June - Tuesday 30 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2024, machine/vehicle number: MAN00000H01152381, color: other, Number of cylinders: 3 Empty weight: 3.650 kg Dimensions (LxBxH): 37 x 17 x 25 cm Working height: 1.000 cm Supply voltage: 12 V CE conformity: yes Engine: Kubota Number of cylinders: 3 Power: 18.5 kW Voltage: 12 VDC Platform load: 680 kg (max. 4 persons) Max. number of persons: 4 Maximum slope: 0.8% Wind speed: 12.5 m/s Buoyancy force: 400 daN Weight: 3,650 kg Working height 10 meters Platform height: 8 m Wheels: solid Transportation dimensions: 3.76 x 1.75 x 2.59 m Online auction of construction, agricultural and industrial machinery (including. KLEEMANN mobile impact crushers, JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, MANITOU / GEHL / GIANT / KUBOTA wheel loaders and skid steer loaders, JLG and TEUPEN aerial platforms, DAF / VOLVO hook-arm trucks, ATLAS COPCO and CHICAGO PNEUMATIC mobile compressors, CATERPILLAR / CUMMINS / FG WILSON power generators, BOMAG / HAMM rollers, SINOBOOM scissor elevator, various agricultural machinery and yard and workshop equipment, etc.), with most of the lots located in our own depot in Deinze, Belgium. The online auction opens Monday 1 June and closes Tuesday 23 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Lajdpfx Aezf Nkaenyec Viewing day is on: - Monday 22 June Pickup days are on: - Tuesday 30 June - Tuesday 30 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), mileage: 530,230 km, power: 265 kW (360.30 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 6,850 mm, loading space width: 2,480 mm, Year of construction: 2017, Equipment: crane, MAN TGS 26.360 First commissioning: 05/04/2017 Mileage: 530,230 km Emission class: 6 Automatic transmission, 12 gears Loading crane COPMA 0.4 + JIB Year of manufacture: 2005 4x hydraulically extendable + 3x hydraulically extendable Load capacity: 4,100 kg at 4.54 m Load capacity: 2,000 kg at 8.4 m Load capacity: 1,270 kg at 12.4 m Load capacity: 610 kg at 15.3 m Load capacity: 300 kg at 16.5 m Remote control Elevated platform control Cargo area: Length: 6.85 m Width: 2.48 m Payload: 12,000 kg Gross vehicle weight: 26,000 kg Tire tread depth front axle: % Tire tread depth second axle: +/- 25–30 % Tire tread depth third axle: +/- 25–30 % Brake pads first axle: 76–82 % Brake pads second axle: 82–82 % Brake pads third axle: 41–24 % Automatic climate control On-board computer Laedpfjzf E Axsx Anyjc Central locking Cruise control Differential lock Electric windows and exterior mirrors Lane keeping assist Air horn Air suspension rear Lift axle rear / Steering axle rear Orthopedic driver's seat Seat heating .... Cevoman bv. Lenskensdijk 5 20 Herentals Belgium

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPHTechnical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation.Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025Manufacturer: SIGModel: HMR - 7478Rated Speed: 26,500 BPHFill Volumes: 65 ml, 125 ml, 200 mlSterilization: H2O2 system (SIG COMBI 2024)System Compatibility: SIG-2 Combibloc 1224 filler platformUpgrades: Filler speed-up conversion kit (SIG-2 2025)Formats: Compatible with 0.065L, 0.125L, 0.2L package sizesAdvanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production.Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts.Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents as a professional-grade asset, available for sale after June 2026, for facilities seeking dependable performance without compromising aseptic protocols.Operational Performance & Versatility Optimized for small-format portion packs, the HMR - 7478 delivers precise volumetric control and stable filling quality at elevated speeds of 26,500 BPH. The aseptic design with 2024-standard H2O2 sterilization supports sensitive beverage categories where extended shelf life and strict hygiene are essen... Lsdpfx Anjzdipujyjac

Year of construction: 2014, condition: used, Leistritz ZSE 60 MAXX-36D Extrusion Line (2014) comprising Koch Technik and Scholz Dosiertechnik feeding system dosing units Leistritz ZSE 60 MAXX-36D twin-screw extruder with 2x 60mm diameter screws 36:1 L/D ratio, co-rotating 8-barrel housing section, electrically heated and water-cooled 2 degassing ports 1200 rpm maximum screw speed 495kW motor with Flender direct-driven gearbox Free-standing control panel with microprocessor and interconnecting wiring Laedpfozb N Hzex Anysc BD Plast BDL double screen changer Ettlinger ERF 200 melt pump Econ EUP 600 pelletizer Stainless steel water bath incl 2x sifters on legs Tredkamp 1C-T 10,000L stainless steel mixing silo Motan 14,000L mixing silo on legs with elevator Big bag system

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller Laodpfxszcu Iaj Anyjc unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, ANCIMO DRG-45 AUTOMATIC FILLING, CAPPING, AND LABELING LINE (2016) Manufacturer: ANCIMO Model: DRG-45 Year: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. DESCRIPTION Automatic filling line specifically designed for containers with cups and similar formats, equipped with a high-precision volumetric dosing system using 8 pistons adjustable by a micrometer screw. The equipment is in excellent condition, with few operating hours, and is ready for start-up. It is supplied with complete technical documentation, CE marking, and electrical and pneumatic diagrams. TECHNICAL DATA • Dosing capacity: 25 – 250 cc • Filling system: 8 adjustable volumetric pistons • Maximum production: up to 3,600 containers/hour • Micrometer adjustment of volume for quick and precise changes EQUIPMENT INCLUDED • Pressure capping head • GMS SATRL25 cap feeder hopper • GMS SABV3CIR510 AH circular positioning vibrator • GMS SAVR1 linear feeder • GMS SAENF150 container elevator • GMS SABV5CIR900 AH circular positioning vibrator • GMS SAVR2 linear feeder • Cup loading and unloading system • EIDOS PRINTESS P4E05# labeling/printing machine DOCUMENTATION • Original manuals • CE declaration • Electrical diagrams Lodpfx Aszcfqronyjac • Pneumatic diagrams APPLICATIONS Suitable for cosmetic, food, chemical, pharmaceutical, and other liquid or semi-liquid products that require precise and repetitive dosing. ADVANTAGES • Complete production line • Very few operating hours • Excellent overall condition • Complete documentation available • Industrial production up to 3,600 containers/hour • Available for inspection

Condition: new, mileage: 750 km, power: 324 kW (440.52 HP), first registration: 06/2025, fuel type: diesel, axle configuration: 6x4, wheelbase: 39,000 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, onboard computer, trailer coupling, - Leaf spring suspension - Differential lock - Speed limiter - Sun visor MAN TGS 33.440 BB 6x4 EURO 6e 3-sided tipper EuromixMTP Euromix tipping system Crane Hiab X-Hiduo 228 - 6 (also available as a 6x6 all-wheel drive) First registration date: 12/2025 700 km Vehicle equipment Diesel engine MAN D2676 LFAZ, 324 kW (440 hp) power output, 2,250 Nm torque, Euro 6e Transmission MAN TipMatic 12.28 OD - MAN TipMatic Efficiency driving program, up to 70,000 kg Front axle tires, optional 385/65R22.5 steering-S+G TL Rear axle tires, optional 315/80R22.5 drive-road TL Front axle, 9,200 kg, not driven, straight Rear axle HPD-1382, 13,000 kg, tandem axle with through-drive, straight Axle ratio, i=3.25 Suspension type leaf/leaf (BB) Wheelbase 3900 mm Daytime running lights, LED Multi-function steering wheel, height and inclination adjustable 2 roof beacon lights on the cab roof, 1 on the right and 1 on the left Trailer coupling on the rear cross member, RINGFEDER Type RF50 A Storage box, center area, rear Air deflector to prevent dust from swirling Cruise control (FGR - driving speed control) Air conditioning MAN Media System Advanced Navigation 7 inch Noise level 80 dB (92/97EEC) Elevated air intake with dry air filter / pre-separator Differential lock Fuel tank 300l left and 35l AdBlue Lsdpfx Anjym Tg Nsyjac Three-part steel bumper MAN BrakeMatic (electronic braking system) Disc brakes on rear and front axles Central locking Sun visor Driver's comfort seat, air-sprung AUX-in/ USB in the dashboard Tipper equipment: EuromixMTP three-way tipper EMK3-K loading crane Type: EuromixMTP EMK3-K Description of tipper body: Length: 5,100 mm Width: 2,410 mm Side boards: 800 mm Front panel: 1,118 mm Flush-mounted, folding lashing eyes Floor: 5mm HARDOX 450 Side boards: 4mm HARDOX 450, left: EuromixMTP hydraulically operated, right: manual swing-out side board or tipping system Rear panel: automatic swing-out 4mm Hardox 450 Front panel: 4mm HARDOX 450 Rear panel: 4mm HARDOX 450 Auxiliary frame: welded structure made of high-quality steel Hydraulics: - Penta tipping cylinder with end stop, - Control block (main valve) - pneumatic tipping control - pneumatic switching tipper / crane - valve on the auxiliary frame - pump and oil tank Options: Hydraulic connection for tipping trailer Broom and shovel with holder Foldable under-ride guard Tarpaulin DURABLE AND ROBUST FOR YOUR USE! Crane Hiab X Hiduo 228-6 6-section boom Radio remote control hydraulic lines for attachments 2.55m = 5500 kg 4.45m = 4150 kg 6.45m = 2850 kg 8.45m = 2120 kg 10.60m = 1680 kg 12.70m = 1380 kg 14.70m = 1100 kg 17.00m = 810 kg For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski Front axle: Steered Rear axle 1: Differential lock Rear axle 2: Differential lock Number of cylinders: 6 GVWR: 32,999 kg Crane: Hiab 228-6 Brand of...

Condition: excellent (used), Year of construction: 1988, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 10354, type of input current: three-phase, total height: 4,000 mm, total width: 7,000 mm, total length: 23,000 mm, input voltage: 400 V, control voltage: 24 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale: Heinrich Wagner molding line, complete with sand preparation: Heinrich Wagner fully automatic molding line, capacity 30 molding boxes/hour, internal dimensions 700 x 550 mm, consisting of: * 1 inclined trough belt conveyor, dimensions 20 x 0.40 m * 1 mixing hopper on frame, capacity approx. 3 m³, with bottom discharge conveyor * 2 silos, capacity 30 tons, with rotary disc discharge and upper distribution conveyor, installed in a pit by third parties * 2 aluminum bucket elevators with casing, dimensions 27 x 22 cm, height 10 m * 1 trough-shaped intermediate silo, dimensions 100 x 200 x 200 cm, with bottom discharge conveyor * 1 batch weighing hopper, dimensions 40 x 50 cm, with flap loading * 1 mixer Eirich type R11, housing diameter 150 cm, including Gustav Eirich belt drive, type R11 * 1 inclined trough belt conveyor, dimensions 0.50 x 27 m * 1 storage hopper, capacity 4 tons, with under-mount conveyor belt and discharge chute * 1 hydraulic power unit (separate, located elsewhere in the facility) * 1 Heinrich Wagner hydraulic squeeze table, type SK3 DAFM-3, 360° swiveling * 1 flask rotator, 180° * 1 molding box transfer conveyor system * 1 Wagner SK4 molding box closing unit, in a 4-column pillar frame with double hydraulic cylinders * 1 mobile cross-transfer conveyor * 2 pouring lines, dimensions 18 x 0.75 m, with hydraulic push-out cylinders * 42 sets of molding boxes, internal dimensions 700 x 550 mm * 1 control cabinet Lodpozfif Refx Anyjac * 1 Siemens computer control system, type Simatic S5 395, including switchgear, power supply cabinets, and all other accessories

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake Ljdpfozcmqtex Anysac - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - Weight: approx. 1305kg – Made in Germany – 2 units – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Laedpfx Aszatlfonyec Elevating spiral screw “Heckmann” all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: good (used), Year of construction: 2014, operating hours: 1,630 h, fuel type: diesel, Genie GS 2669 RT Elevated Work Platform / Scissor Lift, 10m working height, 4x4 Kubota diesel engine, 2014. A video can be sent via WhatsApp. Ljdpfx Ajzfiyhsnysac We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand; we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2005, punching force: 31 t, sheet thickness (max.): 6 mm, controller manufacturer: FAGOR, controller model: CNC 8070 Compact, CNC Punching Machine manufactured in 2005. This DANOBAT P1631 features a punching force of 30 tons and can handle a maximum sheet thickness of 6 mm. It includes an automatic loading system, servo-driven axes, and a hydraulic punching system. If you are looking to get high-quality punching capabilities, consider the DANOBAT P1631 machine we have for sale. Contact us for further details. • Machine features: • Servo-driven axes • Hydraulic punching system • Bosch hydraulic axis system • Sercos bus communication • Central lubrication system • Automatic indexing system • Scrap extraction system • Scrap suction unit • Optical safety barriers • Automatic clamps: 3 pcs • Sheet thickness measuring system • Encoder feedback on servo axes • Axes: • X axis • Y axis • Y1 axis • T Punch axis • T Die axis • C Punch axis • C Die axis Ljdpfx Aszbt Aysnyjac • U2 loading axis • V axis (hammer rotation) • Z3 axis (sorting axis vertical up/down movement) • U3 axis (sorting arm lateral movement) • V3 axis (sorting arm lateral movement) • W3 axis (sorting arm lateral movement) • X3 axis (sorting system translation axis) • Electrical data: • Voltage: 3x400V + PE • Frequency: 50/60 Hz • Main transformer: 30 kVA • 24V / 20A power supply Additional equipment • Automatic sheet loader (automatic loading system) • Automatic sheet elevator • Vacuum sheet handling system • Vacuum suction cups • Sheet separator blowing system • Ultrasonic height detector • Automatic centering system • OMRON inverter system • Electrical cabinet cooling fan

Condition: new, Year of construction: 2026, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Lasdpfx Aotgychonyoc Effective stroke in mm: 610 Overall height in mm: 400 Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Location: ex stock 54634 Bitburg - available immediately -

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift Laedpfx Aszc Rwwsnysc This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: excellent (used), operating hours: 50 h, functionality: fully functional, total height: 2,400 mm, load capacity: 600 kg, construction height: 2,400 mm, year of last overhaul: 2024, DGUV certified until: 07/2027, total width: 1,100 mm, total length: 1,175 mm, lifting height: 1,500 mm, input voltage: 400 V, Boiler lifting tipper Diosna model: HK 115 For planetary kettle stainless steel Lsdpfx Ajd Rxn Ronyjac 2 dumping heights DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned and tested with 6 months warranty

Condition: good (used), mileage: 89,805 km, power: 120 kW (163.15 HP), first registration: 02/2023, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,470 mm, total width: 1,900 mm, total height: 1,910 mm, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 1,390 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Partition = Notes = Configuration: 4x2, Payload: 760 kg, Tare weight: 2040 kg, Gross vehicle weight: 2800 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Tow hitch, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heating, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Seat heating, Bluetooth, Engine power: 120 kW (161 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally elevated, Side wall paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Leather, Seat adjustment: Manual, L3 XL LED Automatic 2.5T - Tow hitch, Alloy wheels, 3 seats / Empty, Navigation, Camera, Euro 6!, Tire type: Summer tires = Additional Information = General Information Lodpfsyzmbwsx Anyjac Number of doors: 1 License plate: V-84-PLJ Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,040 kg Payload: 760 kg GVW: 2,800 kg Functional Loading area height: 54 cm Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 463 € per month (delivery van, 72 months); Please inquire for further information and conditions.

Year of construction: 2001, condition: used, functionality: fully functional, Perfect condition including price: - Onion (any type) & Garlic Peeler - Unpeeled product hopper - Transportation conveyor (for peeled product, waste, inspection table with platform) Laodpoy I Dlmofx Anyoc All equipment is fully made of stainless steel. I also have a large number of spare parts available at an additional cost. A new Tecnoceam Peeler 255 (machine only, without other equipment) costs nearly €200,000! Automatic Air Peeling Machine for Garlic and Onions – PAC 255 (995) This machine is suitable for peeling a wide variety of onions (spherical, elongated, or flat), shallots, and ginned garlic cloves, intended for the fresh produce market, freezing, or preserved products (in oil/pickles, sauces, etc.). ADVANTAGES: • Uniform and gentle peeling process • High flexibility, especially for handling a wide range of onion shapes and sizes • Durable abrasive parts with quick changeover of peeling elements • Wide selection of peeling nets available for different product calibers • Fully automated and customizable continuous operation; control panel allows adjustment of loading time (inserted quantity) and process time (peeling cycle duration) • Easy access to internal components for cleaning and maintenance • Convertible from onion peeler to garlic peeler and vice versa • Suitable for integration in multiple lines (e.g., 2/3 model 255(995) machines in series) Approximate output: Onions: 400–900 kg/h (depending on size, see brochure) Garlic: 200–300 kg/h Overall dimensions: 3,200 x 1,700 x H 2,300 mm (including automatic feed elevator) Product size range: Min. diameter: 25 mm; Max. diameter: 100 mm; Max. stem length: 30 mm Peeling cycle duration: 1–2 minutes

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation Ljdpfx Aoyupkyenyoac For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: like new (used), Year of construction: 2006, 2000 kg load capacity Rotating device, self-supporting, with brake for jig and tool construction for assembly, welding, painting, etc. with foot-operated remote control can be switched between right and left with clamping bracket for raising by approx. 1000 mm Machine is in technically new condition, almost unused Dimensions: Height to center of axle 850 mm Lajdpfx Anshwv R Dsyjc More machines of this type in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Condition: excellent (used), SEVERT Double-Column Rotary Positioner S 40.1-1HH Can also be used as a single-column elevating rotary device (Mono) Total load capacity: 2,000 daN Load capacity per column: 1,000 daN Clamping plate 1 torque: 1,400 Nm Clamping plate 2 free-rotating, without drive Clamping plate rotation speed: 2.0 min⁻¹ Clamping plate 1: W1070 x H720 x D30 mm, Part no. 20452-001 Clamping plate 2: W1070 x H720 x D30 mm, Part no. 20453-001 Vertical travel: 680 mm Lifting speed: 2,200 mm/min Welding current return: 400 A B2 Dimensions: Column 1 with base: Length: 970 mm Width: 885 mm Height: 2,350 mm Net weight: 1,200 kg Column 2 with chassis: Length: 970 mm Width: 1,030 mm Height: 2,350 mm Net weight: 1,600 kg Excellent condition, complete documentation available We have several column elevating rotary devices in stock with capacities from 1 tonne up to 15 tonnes. Ljdpfxsxxx Nrj Anyoac