Used Elevator for sale (729)

Condition: new, 🔹 Quick Description of the 7 Elevators for Sale • Manufacturer: ThyssenKrupp (TK Elevator) • Models: Evolution Blue (L1–L2) and BO61 (L3–L7) • Quantity: 7 passenger elevators L1 – Evolution Blue • 1600 kg, 2.5 m/s, 28 stops, 104 m travel • Machine-room-less, high-capacity Prjdpfxsw R H Sas Adysc L2 – Evolution Blue • 1100 kg, 1.75 m/s, 6 stops, 17 m travel • Compact machine-room-less unit L3–L6 – BO61 (x4 units) • 900 kg each, 3 m/s, 26 stops, 104 m travel • Rope-driven with machine room • High-speed mid-capacity models L7 – BO61 • 900 kg, 3 m/s, 26 stops, 104 m travel • Same system as L3–L6, with slightly different car dimensions ⸻ ✅ In total: • 2 Evolution Blue elevators (1100–1600 kg) • 5 BO61 elevators (900 kg each) • All modern, rope-driven passenger lifts designed for mid/high-rise use.

Condition: used, machine/vehicle number: 684, Load capacity: 1000 kg Graduation reading: 100 g Platform size: 1250 x 950 mm Platform height above floor: 230 mm Platform height with elevation from the underbody: 540 mm Space required: 1250 x 1160/1250 x 1900/2180 mm Weight: 270 kg Predpfx Adsdqw R Rjyoc

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Prsdpfx Aou Snwmjdyjc Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Prodpfxoxr N Tbs Adyoc Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, The KNUTH R 60 V is a powerful and versatile radial drilling machine designed for exceptional drilling, reaming, and countersinking in steel or cast iron, making it a preferred choice among professionals in production and construction companies. This robust machine features a premium construction with a large column and a highly torsion-resistant boom, ensuring maximum rigidity and minimal clamping offset. With its motorized boom height adjustment and oil-bath lifting gears, operators experience smooth handling, even with large and heavy workpieces. Additional highlights include infinitely variable spindle speeds with a digital display and an integrated coolant system, ensuring reliability and cost-effectiveness. The R 60 V, part of the renowned Radial Drilling Machines group, stands out for its modern design and user-friendly operation. Contact us to request a quote and elevate your drilling capabilities with KNUTH’s exceptional machinery. Prodpfjuyic Hjx Adyjc

Condition: used, WEBSTER BENNETT EH 48” VERTICAL BORER WITH ELEVATING RAIL MAKE WEBSTER BENNETT, MADE IN ENGLAND MODEL EH 48 TABLE SIZE 1219 mm SWING 1524 mm HEIGHT UNDER CROSS SLIDE 1156 mm CROSS SLIDE RISE & FALL 559 mm TURRET RISE & FALL 914 mm TURRET TRAVERSE 914 mm SPEED 8.6 – 192 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min Podexcn Huepfx Adyjrc PLUS HIGH SPEED MACHINE NEWALL 2 AXIS READOUT SET OF CHUCK JAWS

Condition: used, power: 6.77 kW (9.20 HP), Year of construction: 2025, operating hours: 23 h, Powerful tracked dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 23h Year of manufacture: 2025 SCHORR tracked dumper RR500DHKAH PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large and high-quality tipping trough with a large tipping angle - Foldable rider platform as standard - 6+2 gears SCHORR tracked dumper DHKAH PRO with hydraulic tipping, rider platform, and scissor lift The SCHORR tracked dumper RR500DHKAH features a hydraulic tipping drive and a payload of 500kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAH is its hydraulically controlled scissor lift function. This allows you to eject the material up to a height of 1.44 m – ideal for trailers, containers, or other elevated surfaces. Thanks to its slim design (700 mm), the mini dumper can also drive through narrow paths and narrow doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate even rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping body/box is effortless and effortless thanks to the hydraulic tipping drive, even when fully loaded. With a robust body made of heavy-duty sheet metal and a straight discharge that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort, making the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKAH Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Drive: Chain Weight without/with packaging: 363 / 388 kg Pjdpfx Aowh Nuajdyjrc Drivetrain Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 km/h Fluids Fuel tank capacity: 6 L (unleaded gasoline) Hydraulic oil tank capacity: 3 L (ISO VG 32) Transmission oil tank capacity: 1.5 L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. hydraulic oil flow rate: 9L/min Basic dimensions Total length of platform folded: 1900mm Total length of platform unfolded: 2100mm Total width (including chain): 710mm Total height: 1050mm Tank dimensions (internal dimensions): 740 x 665 x 435mm Tank dimensions (external dimensions): 1060 x 710 x 520mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging dimensions: 1890 x 740 x 1220mm Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm

Condition: used, WeightPack, Krones & Posimat 750ml Bottle Bleach Filling Line comprising: Lanfranchi bolted stainless steel bottle silo Posimat Access Series N23 bottle unscrambler (2012) Krones Contiroll Labeller (2012) Krones Checkmat 731 inspection system (2012) Prjdpfxoxr A Hzs Adyoc WeightPack WFT 36/8-141 AC, 36 head rotary bleach filler with cap applicator, hopper & elevator

Condition: used, Year of construction: 2002, Overview Aseptic PET filling line for fruit juices, juice-based beverages, and spritzers, built 2002–2007 by KRONES. Suitable for still and carbonated products (carbonation currently disconnected). Covers blowing, filling, labeling, packaging, palletizing. Bottle sizes 0.5–1.5 L, 28 mm closures. Nominal output: 20,000 b/h (1.0 L still). Fully assembled, out of operation, viewing by appointment. Technical details Capacity: up to 24,000 b/h (0.5 L still) Bottle sizes: 0.5–1.5 L PET Products: still/carbonated, with/without pulp Closures: 28 mm flat cap Years of manufacture: 2002–2007 Scope of delivery Pos. 1 Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP Pos. 2 Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h Pos. 3 Sterile tank: Roth 2002, 11,000 L Pos. 4 Carbonization: Roth/Ruland 2002, 2575 L, disconnected Pos. 5 Nitrogen system: Terboven/ISTE 2002 Pos. 6 Hygienic center: Ecolab/Lang 2002, CAF, no PLC Pos. 7/8 Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L Pos. 9 CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank Pos. 10 Cleanroom: Weiss 2002, ventilation/overpressure Pos. 11 Preform hopper: Dieterle 2002, MD3 Pos. 12 Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 Pos. 13 Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h Pos. 14 Air conveyor: Krones 2002, automatic rail adjustment Pos. 15 Cap conveyor: Gassner 2002, 2 container positions, cap elevator Pos. 16–18 Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated Pos. 19 Label check: Krones 2002, incl. in Prontomodul Pos. 20 Bottle check: Krones 2002 Pos. 21 Conveyor: Krones 2002, air blower before labeling Pos. 22 Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h Pos. 23 Canmatic module: Krones 2007, paper labels Pos. 24 Contriroll module: Krones 2007, film roll Pos. 25 MHD coding: Videojet Excel/170i Pos. 26 Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport Pos. 27 Packaging conveyor: Krones 2002 Pos. 28 Handle applicator: Twinpack MHTE 2002 Pos. 29 Empty pallet magazine: Krones LPM 2002 Pos. 30 Palletizing: Krones robot 3A loader 2002, 4,000 packages/h Pos. 31 Pallet conveyor: Krones 2002, transfer cart & turner Pos. 32 Empty pallet magazine: Krones LPM 2002 Pos. 33/34 Pallet stretch wrappers: Franpak 2002, top sheet applicator Pos. 35 Tying machine: Bornbinder HB 2002 Pos. 36 Pallet coding: Logopak EAN 128 2003 Prjdpexqqpuofx Adyjc

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Predpjxrta Esfx Adysc Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, The KB 32 SF from KNUTH is a robust column drilling machine that is essential for any workshop or industrial application. Designed with a modern aesthetic, this machine features a heavy, precision-ground work table equipped with diagonal T-slots for optimal functionality. Its smooth height adjustment mechanism allows for ease of use, even when handling heavy loads. The KB 32 SF boasts a powerful motor, a reliable belt drive, and an integrated LED work lamp, ensuring superior performance and visibility during operations. With a drilling capacity of 32 mm and a spindle mount of 3 MT, this machine is built to meet the rigorous demands of various drilling tasks. Additional features include a forward and reverse function, automatic direction reversal for thread cutting, and a sturdy base plate with parallel T-slots. Included in the standard equipment are a coolant system, drill chuck, tool-holder bits, a drill press vise, and necessary operating tools. Elevate your drilling capabilities with the KB 32 SF, a key addition to your column drilling machines lineup. Request a quote today to enhance your efficiency and precision in drilling operations. Pjdpfx Aeuyiitedysrc

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm Psdpfexp Na Nsx Adyerc HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 16 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Psdpfx Adjwh Nvkoyjrc Operating hours: 16h Year of manufacture: 2025 SCHORR RR500DHKASH PRO tracked dumper – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic bucket for self-loading - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large and high-quality tipping trough with a wide tipping angle - Foldable rider platform as standard - 6+2 gears The SCHORR RR500DHKASH tracked dumper features a hydraulic tipping drive and a payload of 500kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The RR500DHKASH's special features include its hydraulically controlled scissor lift function and self-loading bucket. This allows you to effortlessly load material and discharge it up to a height of 1.44 m – ideal for trailers, containers, or other elevated areas. Thanks to its slim design (825 mm), the mini dumper can also navigate narrow paths, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping body/box is effortless and effortless thanks to the hydraulic tipping drive, even when fully loaded. With a robust body made of heavy-duty sheet metal and a straight discharge outlet that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort, making the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKASH Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Drive: Chain Weight without/with packaging: 439 / 464 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 km/h Basic dimensions Total length of platform folded: 2320 mm Total length of platform unfolded: 2520 mm Total width (including bucket): 825 mm Total height retracted/extended: 1230 / 1620mm Total height at maximum bucket tilt (90°) retracted/extended: 1780 / 2400mm Container dimensions (internal dimensions): 740 x 665 x 435mm Container dimensions (external dimensions): 1060 x 710 x 520mm Bucket dimensions (internal dimensions): 650 x 320 x 300mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm We at SCHORR are happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and helping you with your consultation.

Condition: used, Serta Blow Moulding Line & CMI IC Filler Line 3x Beccaria TV 2500 granule mixer dryers, 2,500L capacity Maguire gravimetric blender 3x Serta ESH10 3 head extrusion blow moulding machines with Moretto hopper loaders Tria BM90-42 granulator with acoustic enclosure (2014) CMI IC 18/5 14PP DOS 6000, 18 head rotary filler (2005) with cap applicator, hopper elevator ProSystem NV003 case packer ProSystem Rotafilm AV1 pallet wrapper Psdpfx Adjxr Ar Djyjrc

Condition: new, Year of construction: 2025, functionality: fully functional, DGUV certified until: 11/2027, warranty duration: 24 months, Model: T 600 S Lifting load max. 600 kg Lifting height max. 1100 mm Tilting angle approx. 45 ° Bracket for tank wagons stainless steel Pedpsdixzlefx Adyjrc Protective equipment standard with a deadman control Device mobile with lock Connection 400V, 3kW, 16A-CEE connector

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt rubber, for bucket elevator, rubber conveyor belt, rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat, rubber strip, rubber strip with fabric insert, scraper bar, rubber lip Pedpsxc Ip Ajfx Adyjrc -Conveyor belt: rubber strip with fabric insert -Width: 250 mm -Length: 23.5 m -Thickness: 8 mm -Shipping/Price: complete -Transport dimensions: Ø 580 x 250 mm -Weight: 59 kg

Condition: new, The VHF 1.1 is a compact and versatile Conventional Vertical Milling Machine in the Universal Milling Machines category, designed by KNUTH. This universal milling machine boasts a robust frame made of vibration-dampening cast iron, ensuring stability during operations. Equipped with a horizontal spindle and a swiveling vertical milling head, the VHF 1.1 allows for infinitely variable spindle speed and feed on the X-axis, making it ideal for diverse applications in training departments, repair shops, and model-making workshops. Its 1.000 x 240 mm setup area and 535 mm travel on the X-axis facilitate various machining tasks, while the included coolant system and chip tray enhance functionality and cleanliness. Users benefit from the extensive standard equipment, which includes a 3-axis position indicator, drill chuck, reducing sleeves, and more. With its precise and powerful performance, the VHF 1.1 is an outstanding choice for anyone in need of a reliable milling machine. Don’t hesitate to request a quote and elevate your milling capabilities today! Pjdpfx Adjuyh Egoyjrc

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Pjdpexpxhvjfx Adysrc Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Rotary glass bottle filler with 144 heads Krones KK24-M rotary capper with 24 heads 25-ml and 33-ml glass bottle formats The offer includes a Gassner crown cap pallet tipper, a magnetic cap elevator, and a cap conveyor. Pjdpoxqpk Rjfx Adyerc

Condition: used, Year of construction: 2009, operating hours: 17,600 h, Drive: Wheel Serial number: WLHZ1007CZK04xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21539   Specifications: Model year: 2009 Certified until: 12/2025 17,600 hours (subject to slight increase) Tires (see photos) 4 support legs Pendulum undercarriage Long boom Predpfx Asxm Th Ejdyjc Grab attachment Elevating cab Long reach Air conditioning Radio Work lights Ready for delivery   Description: We are offering a 2009 Liebherr A934 C HD Lintronic wheeled material handler with elevating cab and grab attachment for sale.All services have been carried out regularly by the owner, and the machine is in good working condition.Some cosmetic wear and damage are present (see photos), so minor faults or defects may occur.The machine is ready for delivery. Hours: 17600 Own weight: 1 Year controlled: Yes Year controlled until: 12/25 Model: A934 C HD Lintronic Hjulmaskin m/ hevbar hytte og klype

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 820 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire size: AS 340/80 R18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: AS 18-22.5 163A8 Rear tire condition: 80 - 100% Pedpfxew Uamro Adyerc Description: The M 50-4 all-terrain forklift is designed for operations in challenging environments or areas with obstacles. With 4-wheel drive and a ground clearance of 43 cm, this forklift ensures optimal maneuverability under all conditions. A wide range of tire options is available for adaptation to varied surfaces, optimizing your productivity. The pendulum-mounted cab, accessible from both sides, offers a spacious driver’s area with ergonomic controls. The elevated driving position provides a 360° panoramic view for enhanced safety for both operator and surroundings. Side shift, 3rd and 4th hydraulic valve, work lights (front/rear), cabin heater, full cab, CE certificate. Includes: service booklet, EC declaration of conformity, operator’s manual, spare parts manual.

Condition: excellent (used), power: 186 kW (252.89 HP), fuel type: diesel, overall weight: 44,000 kg, Year of construction: 2004, operating hours: 10,500 h, Equipment: air conditioning, centralized greasing system, hydraulically sliding cabin, Fuchs Terrex MHL 360 D/material handler/grapple/boom 18 m/22 t lifting capacity • Manufacturer: Fuchs Terrex • Model: MHL360 D • Year of manufacture: 2004 Predpowq Ruyjfx Adyec • Operating hours: 10,500 h • Weight: 44,000 kg • Lifting capacity: 4.5 m = 22 t; 6 m = 16.4 t; 7.5 m = 12.5 t; 9 m = 10 t; 12 m = 6.8 t; 13.5 m = 5.6 t; 15 m = 4.7 t; 16.5 m = 4 t; 18 m = 2 t • 18 metre boom • Power: 186 kW / 252 hp • Diesel • 4x stabiliser outriggers • Air conditioning • Central lubrication system • Stick camera • Elevating cab • Documentation • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typing mistakes excepted. - Sale according to our general terms and conditions.

Condition: excellent (used), REF: MM6263 Complete weighing and packing system, previously used to pack various types of nuts. This system was used for weighing and producing pillow packs and block-bottom packs in 500g and 1kg sizes. This system comprises of the following equipment: 1 x Set of stainless-steel steps. 1 x Deamco stainless-steel guarded hopper on frame with height-adjustable feet. Serial number - 1339. 1 x Riley Automation variable speed vibratory feeder fitted with perforated pan measuring 215mm wide. 1 x Gough Engineering bucket elevator with 200mm wide buckets. 1 x Riley Automation ISF-2 vibratory feeder fitted with a smooth pan. 1 x Ishida 14-head weigher with smooth pans. Model - CCW-EM-214/30. Serial Number - 552130. Date of manufacture -2002. 1 x Painted steel gantry with steps. 1 x Ilapak vertical form, fill and seal bagging machine with updated touch-screen control and supplied with 5 x forming tubes. Model- VT 2000 / 400 S. Serial Number - S977/00. Sealing jaws - Vertical: 430mm & Horizontal: 400mm. 1 x ICE Zodiac Hawk printer. Serial Number - 1927013012TZH. 1 x Herma printer. Model - H400 16R. Serial number - 20314483. 1 x Outfeed inclined conveyor. Belt dimensions -1700mm long x 350mm wide. Pjdpfx Adoxrk Tpsyorc 1 x Ishida DACS combination metal detector checkweigher. Model - DACS-W-012-SB-PB-I. Date of manufacture - 2002. Serial number - 552424. 1 x Outfeed inclined conveyor. Belt dimensions -2350mm long x 300mm wide. Infeed height -770mm. Outfeed height - 1040mm high.

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment Psdpfx Adexnmmdsyerc suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production • total height 3,4 m

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. * Podpfsu Idwbsx Adysrc