Pasta processing machine

PAVAN P 320

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Lhodot Ul Exopfx Agpji

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed Lodpfjkvmi Ssx Agpehi 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Lodpfx Ajw R Sknogpehi Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit Ljdpfetrya Rox Agpjhi - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Ljdsmw Ukcopfx Agpohi Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Year of construction: 2025, condition: new, Equipment: CE marking, The granules filling packaging machine can filling the granules materials, such as beans, rice, sugar,almonds and other granular materials Lhsdpfxexyiz Is Agpsi Filling capacity: 5-5000g Filling speed: 400-600 bags/hour(Base on 1kg) Material: Food grade 304SS Power: 1.5KW Voltage: 220V 50HZ Single phase

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  - Capacity: up to 16,000 bph (based on 1.5L PET bottles) - Formats: 1.5L PET bottles (short neck and lid) - Bottle material: PET - Type of filler: Isobaric filler - Year of manufacture: between 1999 and 2007 (various machines) - Cap type: short neck Lhsdpfxjwzvl So Agpoi - Type of label: OPP (Contiroll) Scope of Delivery  - 1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler - Air conveyors from blowing to labeler & filler - 1 x Labeler CONTIROLL | Krones | 2000 - 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector - 1 x Mixer for carbonated water and drinks | ca. 2000 - 1 x Inkjet printer HITACHI RXS - Conveyors between filler and tunnel - 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min - 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min - Transport of packages to palletizer - 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 - Pallet feeder with lift and transport - 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Lhedpfx Aoutni Rsgpji Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Lsdpfoyxgyhox Agpehi Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Ljdjwa Rhrjpfx Agpohi Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional