Used Emco Maxxmill 500 for sale (138)

Condition: good (used), Year of construction: 2011, Equipment: chip conveyor, rotational speed infinitely variable, Emco Maxxmill 500 5 axes ( 3 + 2 axes ) Heidenhain TNC 620 Dodpfshqfl Hex Acyowc speed up to 10000 rpm x 750mm, y 550mm, z 500mm 30 compartment tool changer Sk40 DIN 69871 Infrared 3d probe ( Heidenhain ) handwheel Heidenhain HR410 Hinged chip conveyor No IKZ Reinforced cooling lubricant pump Machine hours: approx. 22500 h Spindle hours: approx. 7000 h Machine can be demonstrated at our production facility

Condition: good (used), travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Manufacturer: EMCO Type: MAXXMILL 500 new 2014 Control system: SIEMENS 840D Year of construction: 2014 High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours Specifications Metric US Standard X - axis 650 mm Y - axis 550 mm Z - axis 500 mm A - axis -100 to +100 ° B - axis 360.000 ° Table length 600 mm Table width 600 mm Table load 250 Feed X - axis Dedpfx Ajtw Rnfocyjwc 30000 mm/min. Feed Y-axis 30000 mm/min. Feed Z-axis 30000 mm/min. Tool holder ISO 40 ISO/Bt/Mk Spindle power 34 kW kW Spindle speed 10000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) Length 2900 mm width 3300 mm height 3000 mm weight 9200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 2002, Used CNC Lathe EMCOTURN ET-500x1500 WORKING AREA Swing diameter over bed: 580 mm Swing diameter over cross slide: 400 mm Maximum turning diameter: 450 mm Longitudinal travel (Z-axis): 1,060 mm / 1,560 mm Cross travel (X-axis): 310 mm Distance between centers: 1,500 mm WORKPIECE SIZE Max. workpiece length: 1,500 mm Max. workpiece diameter for bar stock: 102 mm Max. workpiece weight between centers: 1,200 kg Max. workpiece weight with unsupported end: 400 kg Center of gravity distance from chuck mounting surface: 175 mm SPINDLE HEAD Spindle mount DIN 55026: A2-8 (ASA 8") Front spindle bearing diameter: Ø 150 mm Spindle bore: Ø 103 mm Draw tube/bar capacity: Ø 90 mm MAIN DRIVE Digital AC motor: SIEMENS ZF gearbox on main motor: (100/40 % duty cycle) 28 / 43 kW Main spindle speed: 2 steps Speed range 1: 40 – 850 rpm Speed range 2: 40 – 3,200 rpm Max. torque: 909 / 1,396 Nm Option: 952 / 1,125 Nm FEED DRIVES digital AC Ball screw diameter X / Z: 40 mm Feed force, longitudinal (Z-axis): SIEMENS 13,570 N / FANUC 10,180 N Feed force, cross (X-axis): SIEMENS 9,050 N / FANUC 7,000 N Rapid traverse X / Z: 20 / 20 m/min Positioning accuracy Ps (VDI 3441) X,Z: 0.006 / 0.007 mm TOOL SYSTEM Number of tool stations: 12 Tool holders per DIN 69880 AXIAL Tool mounting: VDI-40 Performance of driven tools Speed: max. 8 kW at 3,000 rpm Torque: max. 27 Nm at 3,000 rpm TAILSTOCK Positioning: carriage drag automatic Clamping: automatic Quill diameter: 100 mm Quill stroke: 120 mm Internal taper: MT 4 Quill pressure, steplessly adjustable up to: 14,500 N Y-AXIS Y-slide travel: +50 / -50 mm COOLANT SYSTEM Dwsdowxrdfopfx Acysc Tank capacity, version 1,000 / 1,500: 200 / 230 l Coolant supply: via tool turret At 50 Hz: 7.0 bar at a delivery rate of 5 l/min 0.5 bar at a delivery rate of 57 l/min Weight approx. 9 t Note! This machine will be available from mid-January 2026, as a new machine is arriving then. The machine can be inspected under power near Memmingen by appointment. We can provide loading. Buyer is responsible for transport. Technical data, accessories and machine description are non-binding.

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Dsdpew I S Uuefx Acyewc Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Dedpfjw Dfhuox Acyswc

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Media Chip conveyor Yes Additional Equipment Emco standard bar feeder interface Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Short bar feeder Dwedpfxexmbypo Acysc This 4-axis EMCO TURN 332 MCPlus was manufactured in 2006. It features a CNC lathe with a drive power of 10 KW, main spindle speeds up to 6300 rpm, and counter spindle speeds up to 7000 rpm. Equipped with two 12-slot tool turrets VDI 25, it supports up to 24 driven tools. The machine includes a Sinumerik 840D control, chip conveyor, and a bar feeder for bars ranging from 6-45 mm in diameter. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Max. turning diameter: 185 mm Max. turning length: 186 mm Spindle bore: 73 mm Dwjdpfxexl Amnj Acyec Max. workpiece weight: 30 kg Control: SIEMENS SINUMERIK 840 C Including documentation Including chip conveyor Including LNS Quick Load bar feeder

Condition: used, Year of construction: 2008, Table size 700 x 500 mm X/Y/Z - 600/500/500 mm Spindle speeds 10000rpm Spindle taper ISO 40 No. of stations in tool changer 20 Table load 500 kg Control: Fanuc 0i-MC Equipped with: 20 pcs tool holders Dwedpfxewigfre Acyoc 2 pcs vices

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 300 mm, turning diameter: 200 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 1,600 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 300 kg, Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Turning length: approx. 300 mm Center height over bed: approx. 100 mm Travel: X: approx. 100 mm Dodpfx Acsw Ivvieyswc Z: approx. 200 mm The machine is equipped with a tailstock, a three-jaw chuck, a special tool turret including a mobile workbench and suitable accessories.

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Dwjdpoxmkcajfx Acyoc

Condition: good (used), Year of construction: 2009, Machine used only for plastic. thry spindle 95.mm Dsdpfx Aceu Ibnqoyswc Technical data shown on picture. 27.03.2025. With machine will come another spannpfutter with possibility 80 mm. Parts shown by hand not come.

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Table Number of tslots 12 Turret Number of turrets 2 Tool taper VDI 25 Media Chip conveyor Yes Additional Equipment Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2004. It features a CNC lathe with dual spindles capable of speeds up to 6300 and 7000 rpm respectively, and two 12-slot tool turrets. Includes high-pressure coolant systems, a chip conveyor, and a bar feeder for efficient operation. Ideal for precision turning tasks. Contact us for more information about this machine. Application Types Dwsdpfx Acsxmby Ajyoc Turning

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Djdpfx Aswyit Hecyowc Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader Dodpfx Acjunzgroyswc condition see pictures

Condition: excellent (used), Year of construction: 2017, functionality: unexamined, machine/vehicle number: 173902, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 1,500 mm, total width: 1,100 mm, total length: 1,400 mm, table width: 200 mm, table length: 600 mm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 80 rpm, overall weight: 800 kg, input current: 16 A, - Operating voltage: 3 x 400 V Djdpfjwdnz Dsx Acyowc - Frequency: 50 – 60 Hz - Number of table slots: 4 - Tool holder: SK 30 EQUIPMENT: - Three-axis digital readout (Heidenhain) - Collet set included

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center For sale is an EMCO TURN 365 CNC Turning Center in technically flawless condition, immediately available and ready for operation. Year of manufacture: 2000 / 2008 ⸻ Technical specifications Working area: • Swing diameter over bed: Ø 610 mm • Swing diameter over cross slide: Ø 520 mm • X/Z axis travel: 200 / 520 mm • Distance between main spindle and tailstock: approx. 1600 mm • Distance between main spindle and sub-spindle: approx. 520 mm • Max. workpiece length with tailstock: approx. 1600 mm • Max. workpiece length with sub-spindle: approx. 200 mm Main spindle (Spindle 1): • Spindle bore: Ø 65 mm • Front spindle bearing: Ø 100 mm • Spindle nose: DIN 55026 • Max. speed: 5000 / 7000 rpm • Drive motor: AC motor, 29/37 kW (100/40% duty cycle) • Max. torque: 3 Nm Clamping system (optional): • Hydraulic chuck cylinder with draw tube • Max. chuck size: Ø 200 mm Tailstock: • Quill diameter: Ø 100 mm • Quill stroke: 130 mm • Taper: MT 4 • Drive: hydraulic Sub-spindle: • Spindle bore: Ø 42 mm • Front spindle bearing: Ø 68 mm • Speed range: up to 6300 rpm • Max. torque: 240 Nm • Electronic synchronization with main spindle Tool turret: • VDI 40 / Sauter turret with directional logic • Number of stations: 12 • Driven stations (optional): 12 • Drive: 6.5 kW, up to 4000 rpm • Rotary axis resolution: 0.001° General: • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4000 kg • Installation dimensions (L × W × H): approx. 4000 × 2000 × 2000 mm ⸻ Condition & scope of delivery The machine is in excellent, well-maintained condition. Included in the offer is comprehensive documentation including the operating manual. • Inspection possible at any time • Loaded free of charge • Delivery possible by arrangement ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT, changes and errors excepted. Dsdpfx Acjxiy Ukjyswc

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Dodpfxedctnbe Acyswc Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: ready for operation (used), Year of construction: 2005, operating hours: 25,217 h, General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, Dwsdjxfcrdspfx Acysc X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us. Application Types Turning

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, mount diameter: 30 mm, total height: 1,800 mm, total width: 950 mm, total length: 2,000 mm, table width: 120 mm, table length: 420 mm, Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: presumably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm With 2 T-slots and a special EMCO vise Jaw width: 60 mm Dwjdow Ivu Eepfx Acyjc Travel paths: X: approx. 300 mm Y: approx. 300 mm Z: approx. 200 mm Includes matching mobile workbench with various compatible contents Includes 7-position tool changer, collets, and various suitable tool holders

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 828 D Main Drive Spindle speed range 50-12000 Number of axis 3 Movement Djdpown N Iyjfx Acyswc X-Axis Movement 900 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 500 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 24 m/min Table Outer length 1000 mm Outer width 520 mm Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table 600 mm Table load 800 kg Tools Slots in storage 20 Media Chip conveyor Yes Additional Equipment Rinsing gun Cooling medium tray 360l IKZ 15 bar This 3-axis EMCO EmcoMill E900 was manufactured in 2014. A vertical machining center featuring a Siemens 828D control, it offers a spindle speed up to 12,000 rpm and torque of 83 Nm. It has a travel distance of X 900mm, Y 500mm, Z 500mm, and a rapid traverse rate of 24m/min. The machine includes a chip conveyor, a 360l cooling medium tray, and a 20-tool magazine. If you are looking to get high-quality milling capabilities consider the EMCO EmcoMill E900 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), General Data Machine weight 2100 kg Control Unit Brand FAGOR Model 8055 Main Drive Spindle speed range 3000 rpm Spindle motor power 11-15 kW Spindle bore 52 mm Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 5 m/min Djdpfxjxirfbj Acyswc Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 5 m/min Tail Stock Pinol diameter 52 mm Pinol tool taper 4 N Additional Equipment Total Installed Power: 13 kW This EMCO EMCOMAT-E 200X1000 was manufactured in 2003. A robust horizontal turning machine featuring a FAGOR 8055 CNC, it offers a spindle speed of up to 3000 rpm and a spindle power of 11-15 kW. The machine handles a maximum diameter of 400 mm above the bed and 220 mm over the slide, with a center height of 200 mm. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 Dwjdpfx Aexgwaljcyoc This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2003, operating hours: 4,894 h, condition: ready for operation (used), General Data Measurements width 2500 mm Measurements depth 4000 mm Measurements height 2500 mm Machine weight 6000 kg Control Unit Brand SIEMENS Model Sumerik 810 D Main Drive Spindle bore 65 mm Number of axis 3 Movement X-Axis Movement 210 mm X-Axis Feed Force 5000–7000 Nm X-Axis Rapid Traverse 24 m/min Y-Axis Movement ± 40 mm Z-Axis Movement 610 mm Z-Axis Feed Force 5000–7000 Nm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 1 Rotating tools Yes Tool taper VDI 30 Tools Number of station 12 Additional Equipment Oil cooler Parts catcher General Data Measurements width 2500 mm Measurements depth 4000 mm Measurements height 2500 mm Machine weight 6000 kg Control Unit Brand SIEMENS Model Sumerik 810 D Main Drive Spindle bore 65 mm Number of axis 3 Movement X-Axis Movement 210 mm X-Axis Feed Force 5000–7000 Nm X-Axis Rapid Traverse 24 m/min Y-Axis Movement ± 40 mm Z-Axis Movement 610 mm Z-Axis Feed Force 5000–7000 Nm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 1 Rotating tools Yes Tool taper VDI 30 Tools Number of station 12 Additional Equipment Oil cooler Parts catcher This 3-axis EMCO turn 365 tcmy was manufactured in 2003, featuring a 12-station tool turret, VDI 30 tool holder, and driven tools with a speed range up to 4,000 rpm. It includes a power chuck, live centre, collet chuck device, and additional tool holders. Ideal for precision turning, this machine offers robust capabilities with a spindle size of 65 mm and a travel distance on the Z-axis of 610 mm. Contact us for more information about this machine. Dwodpfx Aoxcql Tecyjc Application Types Turning

Year of construction: 2014, operating hours: 100 h, condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 4500 mm Measurements height 1800 mm Machine weight 2200 kg Control Unit Brand FANUC Model 31t- Model B Controller Brand FANUC Model 31i B Main Drive Spindle speed range 5000 Number of axis 3 Workpiece Workpiece weight 4.5 kg Additional Equipment Automatic bar loading magazine with adjustable part length and bar diameter Dwedpfx Acsxbul Uoysc Remnant extraction system Guide channel made of polyurethane plastic Displacement system for longitudinal movement This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Dsdjxcqmqopfx Acyowc Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning