Guidance and lathe

Emco Emcomat 17 D

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm Pgodpfx Aswvuf Tof Isg >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Center Distance: 300mm Pgodpfxow Imhvs Af Ieg Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Leadscrews Metric Pitch: 0.25 – 3mm/rev Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis digital display EMCO Year of manufacture: 2007 with CE mark Centre distance: 700 mm Centre height: 170 mm Swing over bed diameter: ø 340 mm Swing over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed slide guide length: 380 mm Tool shank section: 20 x 20 mm Distance spindle centre - compound: 34 mm Compound rest swivel range: 60 / 120° Main spindle: Spindle mount DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper to DIN 7178 1 : 22 Spindle bearing diameter (front): ø 70 mm Max. chuck diameter: ø 200 mm Max. faceplate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Infinitely variable speed control Mechanical speed ranges: 4 Main drive: Rated power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Pgsdpfsxx S R Asx Af Ijg Feeds: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Thread cutting: 20 (28) metric threads (standard): 0.4 - 7.0 mm Tailstock: Quill diameter: ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Offset adjustment: ±13 mm Permissible workpiece weights: (between centers, unsupported): 50 kg, supported by tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and for training purposes. Equipment: - EMCO 3-axis digital readout with color display - Potentiometer, EMERGENCY STOP button, digital speed display at the control panel beside the DRO - 3-jaw chuck - MULTIFIX quick-change toolpost, size B - Electrically interlocked chuck guard - Quick-action collet attachment - MICROJET coolant spray system - Chip guard at rear - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility “Due to its quality and price, the machine is not suitable for private individuals.” Available from March 2026

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V Pedpfev Iqm Sjx Af Iogg EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: new, Year of construction: 2025, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Pgjdpfxswq A Dys Af Ijg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Pgjdpfx Aov Iqlzjf Isg Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders Pgsdpfjx E Dncjx Af Isg - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: new, Year of construction: 2025, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Pgjdpjvvlxlsfx Af Isg Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg

Condition: as good as new (ex-display), Year of construction: 2025, Max. over bed diameter: 330 mm Max. swing diameter without bed bridge: 476 mm Max. swing diameter over cross slide: 198 mm Center height: 165 mm Turning length: 500 mm Spindle end: D1-4/DIN55029 Spindle bore: D38 mm Can be cut threads: Metric, Whitworth, Module Spindle speed: 70 – 2000 rpm Tailstock taper: Morse 3 Motor power: 1.1/1.5 kW Machine weight: 500 kg Machine dimensions: 1320 x 610 x 1400 mm Accessories, Equipment - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - 4-station tool post - Electromechanical spindle brake - Follow and stationary steady rest - Coolant system - Halogen work light - Feed guard - Splash guard - Manuals The machine is in brand new condition. Operating hours are 0. Showroom machine. Pgjdpexb Axcefx Af Isg

Condition: good (used), Centre distance: 450 mm Pjdew I A Uxepfx Af Isgg Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request