Used Emcomat 7 for sale (26,966)

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, spindle bore: 250 mm, Oil country lathe SARO SBF 7/3000 Max. diameter: 700mm Spindle hole: 250mm Turning length: 3000mm Ijdpfx Acezt Irxsloif ✅ Working condition ✅ New electrical panel ✅ Full documentation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CAB7211522, JAKA ZU 7 collaborative robot (cobot), CAB 12, year of manufacture 2021, complete, serial number CAB7211522. 2 units available: 1 x 950 mm, 1 x 819 mm. Price applies to 1 unit. Iodpfx Acjzmqt Sslsif Year of manufacture: 2021 Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 819/954 mm Scope of delivery: Robot, controller, cables, software Used item – normal signs of wear. Further details, article numbers and pictures available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of units, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table - Height adjustment via the sanding units Iisdpjyxqdkefx Aclef - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Applications: - Solid wood - Veneer - MDF/engineered wood panels - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3L3YF03390, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This lot consists of six JUKI LH-series industrial twin-needle lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI LH-3100 Series is one of the world's most widely used industrial twin-needle sewing platforms, renowned for exceptional reliability, precise parallel stitching and outstanding productivity in demanding garment manufacturing environments. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched production set with identical operating principles, common spare parts inventory and simplified maintenance. These machines are ideally suited for denim manufacturing, jeans assembly, workwear, uniforms, technical garments and other applications requiring strong, accurate parallel seams. Bundle Contents Machine 1 Model: JUKI LH-3188-7 Internal Reference: 3A-V256 Machine 2 Model: JUKI LH-3188-7 Year: 2004 Internal Reference: 7A-V257 Machine 3 Model: JUKI LH-3128-7 Year: 1998 Internal Reference: 37A-5470 Machine 4 Model: JUKI LH-3178-7 Year: 2008 Internal Reference: 32A-V459 Machine 5 Model: JUKI LH-3178-7 Year: 2002 Internal Reference: 28A-V249 Machine 6 Model: JUKI LH-3188-7 Internal Reference: 47A-K525 Technical Specifications Manufacturer: JUKI Corporation Model Series: LH-3128-7 / LH-3178-7 / LH-3188-7 Machine Type: Industrial Twin-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Twin-Needle Lockstitch System Vertical Hook System Automatic Lubrication Integrated Electronic Control System (-7 Models) Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Tables Heavy-Duty Steel Stands Production Benefits • Factory-matched production set • High-speed twin-needle sewing • Excellent seam consistency • Accurate parallel stitch formation • Reliable performance during continuous production • Reduced operator training requirements • Common spare parts across the production cell Why Purchase This Lot • Six professional JUKI twin-needle sewing machines • Matching machines from one factory • Shared maintenance procedures • Common spare parts inventory • Cost-effective production line expansion • Ideal for new or expanding garment factories • Excellent investment for denim and workwear manufacturers Applications • Jeans production • Denim manufacturing • Double-row topstitching • Waistband sewing • Pocket attachment • Decorative topstitching • Workwear manufacturing • Uniform production • Technical garments Iodpfx Asznbtlocleif • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Iedpfx Aewwk Tvjcleif Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Year of construction: 2016, condition: excellent (used), functionality: unexamined, Edge Polisher Comandulli Musa 7+4 DX Working direction: from right to left - Feed speed (conveyor belt) 0 to 3 m/min - Belt width 600 mm - Working thickness 10 to 80 mm - Min. working width 80 mm - Max. working width (without bar) 1200 mm - Max. working width (with bar) 3000 mm - Loading plane height 750 mm Aggregates: - Calibrating spindle with vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles, no. 7, with floating mechanism – oscillation - Chamfering spindles, no. 4; the first two chamfering spindles (no. 1 upper and no. 1 lower) are inclined at 45° and equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously created chamfers. Automatic valves for the water 2 roller tables, each 1.5 m long Color touch screen Rated power 22 kW Iisdpszipzgefx Acljf Dimensions (excluding rollers) 5.15 x 1.8 x 1.74 m Weight 4000 kg

Year of construction: 2025, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale High-quality replacement shafts for a Lindner Urraco 75 shredder are for sale. – Application: Old wood, household and commercial waste – Condition: New / very good condition Design: Original Lindner shafts, not replica shafts The shafts are ready for immediate use. Iiodszphiijpfx Acljf The price stated is net. Notes: • Sale is made excluding any warranty or guarantee. • No returns or renegotiations. • Subject to prior sale. All information is without guarantee. The seller assumes no liability for any errors, omissions, or changes to the information. The sale is made exclusively subject to prior sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fanuc S-500iB robot, R-J3iB with 7th axis/motor Serial number: R06837005 Year of manufacture: 8/2006 Controller: R-J3iB Number of axes: 6 Max. payload: 15 kg Max. working range: approx. 2757 mm Profibus Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on site. Iedpfx Acszmtg Ujlsif Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, Year of construction: 2018, functionality: fully functional, HCU 7/160 Cone Crusher Year of manufacture: 2018 Crusher inlet [mm]: 160 CSS [mm]: 12-32 mm Motor [kW]: 90 Hydraulically adjustable gap Isdpfx Acozl N Uljlsif The crusher produces cubic material and is suitable for the hardest materials. Crusher with oil tank and 90 kW motor Crusher with control cabinet and PC control Galvanized support structure included Machine is fully operational

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, operating hours: 7,198 h, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck Iijdpfxoyub Iqs Aclof It has a 7m cutting length 18.5kWh saw engine

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Iiedpfx Ajzn Aymeclef Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Iodpfxjy Efbkj Acloif

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Iedpfx Aszq Efqscljif Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Iijdpfx Aoytruxscljf Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Note: The machine can be transported on a truck up to 3000 mm wide! Iiodpfx Acszld Nqelef Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Iiedpfoyzmbdjx Aclsf Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, Year of construction: 2008, serial number 1068645 x-travel 2080 mm Iisdeztfvhspfx Aclef y-travel 812 mm z-travel 750 mm ja ja internal cooling ja

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Isdpfx Asy Nxnrscloif Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter Iijdpozgtyhofx Aclsf 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: excellent (used), Year of construction: 2001, NOWICKI MA-7-6000PSCH tumbler Capacity: 6000 liters Ijdpfx Aszmwgroclsif The machine is equipped with a cooling system.

Condition: excellent (used), Year of construction: 2005, operating hours: 62,289 h, functionality: fully functional, machine/vehicle number: 15035709574, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 18,000 m/min, nominal power (apparent): 55 kVA, controller manufacturer: Heidenhain/Mill Plus, controller model: Heidenhain/Mill Plus, workpiece length (max.): 600 mm, workpiece width (max.): 400 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 600 kg, total height: 2,900 mm, total length: 2,900 mm, total width: 2,650 mm, table width: 500 mm, table length: 700 mm, table load: 600 kg, overall weight: 7,400 kg, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-axis CNC machining center Deckel Maho DMU 70 Evolution Control system: Heidenhain / Mill Plus Tool magazine: 60 tools Year of manufacture: 2005 Iodpfx Acezvdb Ieloif Country of origin: Germany Machine parameters: - Axis X travel: 750 mm, Axis Y travel: 600 mm, Axis Z travel: 500 mm - Axis B: 180 degrees - Axis C: +/- 360 degrees - Feed rate range: 18,000 mm/min - Rapid traverse rate: 50 m/min - Max spindle motor power: 20 kW - Tool holder: SK 40 - Work table dimensions: 700x500 mm - Work table load capacity: 600 kg - Chip conveyor - Coolant system - Complete programming manual - Technical documentation - Machine weight: approx. 7.4 tons - Machine dimensions: approx. 2,900 x 2,650 x 2,900 mm The electrospindle was replaced in 2023.

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Iiedsu H R Hmepfx Aclsf Max height workable: 250 mm

Condition: used, Year of construction: 2000, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 550 mm, cutting width (max.): 650 mm, total length: 2,250 mm, total width: 3,700 mm, overall weight: 2,400 kg, Equipment: CE marking, documentation/manual, lighting, motor brake, For sale: immediately available, fully operational vertical bandsaw, Friggi 104/FG 700 TS, manufactured in 2000. Work surface: 1200mm x 1500mm Table load capacity: 1000kg Vertical cutting capacity: 550mm Horizontal cutting capacity: 650mm The machine is available for immediate delivery! Technical specifications can be found in the photo! Isdpfxozvhr Dj Aclsif

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, total height: 2,700 mm, total width: 3,000 mm, total length: 5,000 mm, table width: 550 mm, table length: 860 mm, overall weight: 7,000 kg, workpiece weight (max.): 800 kg, controller manufacturer: RÖDERS, controller model: RMS 6 VERSION 4.20, positioning accuracy: 0.005 mm, Equipment: documentation/manual, RÖDERS RFM 760/2 HSC Milling Machine - Includes two EROWA clamping systems - Additional matching accessories - A cooling system and extraction system - Also includes a workbench with fixtures and a 3D measuring probe Note: The machine can be transported on a standard truck! Iijdpfozlfa Djx Aclef Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: used, Year of construction: 2006, functionality: unexamined, For sale: lot of 7 industrial electric motors and gear motors. The lot includes: - Siemens electric motors - VEM ATEX explosion-proof motor - Gear motors with industrial gearboxes - Various sizes and power ratings Equipment originates from industrial application and has been professionally removed and stored. Condition: Used industrial surplus. Functionality has not been tested. Sold as shown in photos. Ideal for: - industrial maintenance - spare parts stock - conveyors - mixers - process equipment - machine builders Sale preferably as one complete lot. Location: Dunajská Streda, Slovakia (EU) Iisdpfx Ajzfwwbeclef Worldwide shipping possible.