Used Engraving for sale (322)

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Isdowtnxnepfx Abrehu Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction Ihedeyctfdepfx Abrou - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. Ihodpfx Abeu Nu Tpereu *

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, laser type: fiber laser, Model 2022 for Industry 4.0! Laser marking machine for: = ᐳ Mark = ᐳ tempering of metals = ᐳ labeling of many materials = ᐳ deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (var.pulse width on request) Simple operation and handling! Iayabahok Our Exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect starting engravings) • "New Generation ECO" scanner unit • 19 "PC control, no external card! • very large viewing window with certified laser safety glass Ihsdpfxed S I Sms Abrju • Scan area approx. 150 x 150 mm • electrical height adjustment • Full housing with 4 roles • Mark "weightless" lift gate for safe. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from an Excel file • Laser parameter finder per matrix over 2 parameters • TCP IP connectivity for external components • Industry 4.0 can be processed at any time using the TCP / IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64bit • Improved stability through integrated control card • Optional up to 4 axis controls (integrated) • Optional DEEP engraving with Z axis • More powerful algorithms for fast hatching. • Completely redesigned galvo generation • 2-fold laser pointer for checking the focus position. • LED lighting of the marking area • Connection possibility for external suction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • protective housing acc. Laser class 1 • incl. 4 hours of training in our training center (max. 2 people) Do you need individuality? With pleasure. Choose from our numerous accessories: = ᐳ Camera systems for object detection = ᐳ Fiber laser source in almost all variations = ᐳ motorized and automatic height adjustment = ᐳ Scanlab equipment = ᐳ Automation for assembly = ᐳ conveyor belts for inlet and outlet = ᐳ 3D marking and GRAVIER function. = ᐳ automatic focus adjustment = ᐳ turntable = ᐳ motorized sledge = ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers of course allow individual wishes in terms of design and size! = ᐳ Made in Schweinfurt! Images can contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser, marking laser

Year of construction: 2023, operating hours: 2 h, condition: new, Model 2023 - Professional fiber laser source XRAYmark with 20 Watt power and 400 kHz - Scanner unit "PreciseView" with camera for live image - T-slot plate or threaded hole plate for easy mounting of the marking unit (200 x 200 mm) - Viewing window with certified laser safety glass - scanning area approx. 100 x 100 mm - manual height adjustment - Housing with man. Lift door for easy and safe marking. EZCAD III software - Barcode and QR-Code support - Serial number function - Batch scanning from Excel file - Laser parameter finder by matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP Connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like third party camera position detection etc. - Industry 4.0 via the TCP/IP protocol can be processed at any time the state. - Inputs and outputs for direct interaction with the outside world - New look and feel. A fresh design which allows an even clearer and more pleasant operation. - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins. - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned Galvo Generation (Eco, Hi-Speed & 3D) with 2x laser pointer to visually check the focus position. Ihodpfx Asd Ibu Nobrju Cuhn227e - LED illumination of the marking area - Connection possibility for external suction - Start button and emergency stop on the housing - Software for PC for Windows operating system - USB cable for connection to the computer - Instruction manual and operating software in German As option offer among other things =ᐳ IPG laser source / fiber laser source in various powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for stocking, conveyor belts and much more! =ᐳ 3D Marking and GRAVING Function. =ᐳ automatic focus adjustment =ᐳ rotating unit =ᐳ motorized carriage =ᐳ Interlock system for marking WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts. incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our factory in Schweinfurt! Therefore, individual requests are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, #Laser marking machine for marking many materials. Extremely clean and high contrast #engravings are achieved with the fiber laser source. This #laser engraving machine is economical and easy to use.

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Iedpjixxqkefx Abrohu Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. *

Condition: excellent (used), Here we offer a laser marker. Product features: Class 4 CO2 laser Micro-marking Iodpfxjffmxno Abrshu Wavelength: 10.6 microm 0.417 mil Laser power continuous wave: approx. 30 W Weight marking head: 20kg Weight control unit: 12kg Marking field size with process area cover : 0-55 mm or 0 - 2.2 inch Permitted ambient temperature: 0 - 40 degrees Celsius Permissible humidity : 35% - 85% 100 V AC: 1,000 VA or less 200 V AC: 1,200 VA or less Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji,symbols,up to 50 self entered characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix and Bar Codes Type: LP-431U-C condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Here we offer a laser marker. Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm 0.417 mil Laser power continuous wave: approx. 30 W Speed: 240 m/min or less Weight marking head: 20kg Weight control unit: 12kg Marking field size with process area cover : 0-55 mm or 0 - 2.2 inch Permitted ambient temperature: 0 - 40 degrees Celsius Permissible humidity : 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, Isdpfx Asffttrsbrshu hiragana, kanji,symbols,up to 50 self entered characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix and Bar Codes Type: LP-431-C condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) Ihodpociz Iyefx Abrou (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3DMICROMAC laser marking system microCUT Enclosure Laser source IPG Raylaighs-3 axis scan system Power sensor 1 Power sensor 2 Camera system for positioning Camera system for quality inspection Cooler Suction Control cabinet with IPCs Distributor Cooling media Machine dimensions: Machine weight: 2 tones Ihedefgbt Eopfx Abrou width 922 mm, depth 4653 mm, height 2925 mm Components: Suction: height 2869 mm, width 760 mm, depth 1577 mm cooler: height 1697 mm, width 1440 mm, depth 860 mm Weight (without filling) 500kg Laser rack: height 1786 mm, width 856 mm, depth 806 mm Weight 500kg Switch cabinet: height 2001 mm, width 1616.05 mm, depth 605 mm Machine connections: Electrical: mains voltage 3*400 VAC/N/PE Mains power consumption 74A Frequency 50/60Hz Power consumption 51,3kW Control voltage 24/5VDC Main fuse NH 100A gG Mudule: Laser source: mains voltage 400 VAC Frequency 50/60Hz, power 16.7 kW, current consumption 59A Cooler: mains voltage 400V, frequency 50/60Hz, current consumption 40A Machine: Consumables Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid state: Class 1 Oil. Class 1 Water: Class 4 Residual oil content ᐸ 10µg/m³ Water content ᐸ 6 g/m³ Pressure dew point 3 °C Consumption ᐸ 120 l/min Cooling water cooling unit modules: Temperature cooling water outlet 21°C Temperature cooling water return 26°C Setpoint tolerance 1K Cooling water flow 69l/min Free pump pressure 1.5 bar DI water cooling unit Temperature cooling water outlet 26°C Temperature cooling water return 31°C Setpoint tolerance 1K Kühlwa [...]

Condition: not inspected (used), Bluhm Systeme marking lasers Here we offer you a Bluhm Systeme marking laser. Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested) Introduction: The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825 and EN 60825 (standards for end-user applications). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a protection class product in accordance with the above-mentioned directives. The e-SolarMark is a laser system for marking and engraving plastics, metals and foils while stationary or in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. the marking unit with laser head (scanning head) with focusing lens. 2. the control unit contains the power supply unit, electronic control system and firmware for the system function, I/O slots inside. The e-SolarMark includes a fixed galvo scanning head equipped with a lens for a square marking field with standard dimensions of 70 X 70 mm Laser specification in standard version Laser Type---Fiber Laser Laser output power---FL2 model: 19W; typical Wavelength---1062 nm typical Internal Modulation---20 to 80 kHz Scanner Head Description: Scan Head---Two galvanometric mirror scanners with hard, highly reflective dielectric coating. F-Theta Ihsdpfsq Rtz Hex Abrou Lens types and their characteristics: Lens marking field 70x70 mm to 300 x 300 mm Focus distance B 192 mm Working environment Conditions: Relative humidity up to 80% non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length marking/control unit 3 m Weight marking unit 5 kg Weight of control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption FL2 model 450W Type: e-SolarMark FL Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Isdpfx Asdux Duebrshu Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, total width: 550 mm, total length: 460 mm, total height: 490 mm, input voltage: 230 V, grinding wheel diameter: 100 mm, overall weight: 51 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.375 kW (0.51 HP), spindle speed (max.): 5,300 rpm, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Iodpjq E Ry Hofx Abrjhu Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Condition: used, Laser TECHNIFOR TF410 Ihedpfx Abjx Tvhkorou

Condition: good (used), Year of construction: 2008, For sale is a laser head of the Lang-Laser brand and type J48-1SW The laser has been professionally dismantled and stored in working order Technical data Year of manufacture: 2008 Voltage: 30 V Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Ihsdpfx Abjt Dmbysrsu For further information or contact options, please visit our website

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,481 h, laser power: 60 W, working range: 1,300 mm, A CO2 laser cutting machine of the Eurolaser brand and type M-800 is for sale. This laser is suitable for both cutting and engraving The machine is fully functional with few operating hours Technical data: Materials to be processed: plastic, acrylic, wood, fabric, stone, composite materials, paper, cardboard, glass, ceramics Operating hours: 5481 Year of construction: 2018 x-stroke: 1300 mm y-stroke: 830 mm Cutting height: min. 15 mm, max. 55 mm Cutting speed: min. 0.001 m/s, max. 1.414 m/s Laser power: min. 60 W, max. 450 W On request, transportation and loading can be arranged at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Ihedpfx Absup N Dhjrou Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The Bavelloni NRG420 CNC machine can perform the following operations: - Internal and external edges - Drilling - Milling - Writing and engraving with diamond tools Technical details: - Vector monitoring of speed from 0-12,000 rpm - Lower energy consumption - Reduced noise level - automatic positioning of suction cups - automatic tool measurement - The machine is equipped with 20 tool holders, fitted with a quick clamping system for ISO 40 tool holders with mechanical locking and unlocking by means of a pneumatic cylinder - Multiple tool holders allow over 40 tools to be stored in the magazine - Internal automatic cleaning of the spindle (cone housing) using compressed air - Pneumatic compressed air system to prevent the ingress of dust and liquid - Dual cooling system: directly from the inside of the tool using clean water / externally with circulating water through sprayers located around the tool - The following glass thicknesses can be processed: float glass 3-12 mm / laminated safety glass 6-25.56 mm - Installed power: 37 kW - Electrical supply: 3-phase 400V, 50/60Hz - Control voltage: 24VDC Ihedpfxsyabvro Abrou

Condition: used, functionality: fully functional, Year of construction: 2018, TRUMATIC 6000 FIBER (K06) LARGE FORMAT + SHEETMASTER + GRIPMASTER Year of manufacture: 2018 Laserpower: 3kW fiber Additional functions, MACHINE: Punching quality package Forming package MultiTool function Engraving function SoftPunch function Die spray lubrication with level monitoring Descending die Integrated flattening function Ihodpfoyambaox Abreu Smart punch monitoring Additional clamp 1 pc Individually opening clamp 4 pc Repositioning cylinder Vibration damping Brush tables with loading and unloading aid Warped sheet detection Wireless Operation Point MDA interface Additional functions, SHEETMASTER: SheetMaster 3000 x 1500 mm (AK04) Loading station with fanning magnet Unloading platform Loading and unloading parallel to production Peeling system including positioning aid for large-sized sheets Additional positioning aids for medium-sized sheets Additional positioning aid for small-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Additional functions, GRIPMASTER: GripMaster 3000 x 1500 mm Parts conveyor belt for punch & laser side

Condition: new, functionality: fully functional, overall weight: 1,000 kg, Year of construction: 2026, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, controller manufacturer: CSMIO, controller model: IPM, sheet thickness steel (max.): 20 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 20 mm, actuation type: electric, CNC controlled plasma cutting system with water table 3000x1500mm, comprising: - Operator terminal - machine control / SimCNC - nesting and G-code generation / i3 Nest - drawing software / i3 CAD - Parametric standard components / i3 Macro - repair tool / DXF / i3 DXF Cleaner - WIN 11 PRO - Processor / i7 / 3.8 GHz - Memory / 16 GB RAM - Graphics / Radeon RX550/550 Series - Hard drive / 1TB Samsung SSD 980 M.2 - Mainboard / WIFI - 24" monitor - USB 3.0 / data transfer - THC / automatic height control - Collision protection sensors - Ohmic and floating touch sensing - engraving unit / FESTO pneumatics - workspace monitoring - Servo drives on all axes - Linear rail guides - Rack and pinion drive - Working area 3000x1500mm - Welded machine bed - Pipe cutting up to 120mm - Positioning aid / point laser - Plasma power source / Hypertherm SYNC 105A - Maintenance unit / dry and clean air Ihedpfox Sdtfox Abrou

Condition: new, Year of construction: 2026, Available working areas (mm) 500×300, 950×600, 1300×900, 1600×1200, 1600×2000 Power of the laser resonator 75W-160W Ihodon Nvydspfx Abreu

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: CAM 060934A1035, overall weight: 600 kg, We are offering this used vhf camfacture AG CAM 1035 Active Pro gantry milling machine, year of manufacture 2010. Type: CAM 1035 Active Pro Serial number: CAM 060934A1035 Weight: 600 kg Year of manufacture: 2010 If you have any questions or need further information, please feel free to send us a message or give us a call. Iedjx Srw Ejpfx Abrehu For sale is a vhf CAM 1035 Active Pro CNC gantry milling machine from 2010 (Made in Germany). This machine is suitable for precise operations such as milling/engraving in typical materials used for fittings/profile machining. Nameplate data: Machine no. CAM 060934A1035, weight approx. 600 kg. On-site inspection is possible by prior arrangement; loading/collection by the buyer.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Ihsdpsr Eqbysfx Abreu Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Ihodpothitpefx Abrsu Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1000W LCH-1000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from Iodpethithjfx Abrohu MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 2000W LCH-2000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Ihsdpfothittox Abrou Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.