Used Extension Ladder for sale (5,667)

Condition: used, functionality: fully functional, first registration: 03/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, color: red, gearing type: mechanical, Year of construction: 1997, Equipment: differential lock, From our immediately available stock of used vehicles, we offer you: Fire Engine LF 16/12 on MAN 14.222 with Differential Lock General Data: • Year of manufacture: 1997 • Mileage: approx. 31,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.222 4x2 with differential lock and 222 HP • Diesel engine with manual transmission and power steering • Tow bar Ndjdexd Unbepfx Afusb Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Holders for 2 breathing apparatus sets facing away from direction of travel • Auxiliary heater Body: • Manufacturer: Ziegler • LF 16/12 body in accordance with DIN • Two spacious side equipment compartments per side • Folding steps for side compartments • Mounts for standard equipment • Bracket for hose reel • Mountings for 2 additional breathing apparatuses • Storage for extension and hook ladders on the roof Vehicle pump / Extinguishing agent tank: • Ziegler FPN 16-8 centrifugal fire pump • Output: 1,600 l/min at 8 bar • Water tank: 1,700 l • Foam tank: 400 l Firefighting equipment: • Rigid quick-attack line (top of G6 compartment) • Roof monitor • Built-in foam proportioner Safety and Lighting: • 3 blue rotating beacons • Electronic siren system • Lighting for crew and equipment compartment • Additional spotlights • Optional hygiene board and reversing camera All details are stated to the best of our knowledge and belief; no guarantee for completeness or accuracy. This advertisement is intended solely for informational purposes and does not constitute an offer. Subject to prior sale!

Condition: used, mileage: 25,943 km, power: 154 kW (209.38 HP), first registration: 06/2003, fuel type: diesel, overall weight: 10,500 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total length: 7,090 mm, total width: 2,500 mm, total height: 3,120 mm, Equipment: ABS, all wheel drive, parking heater, Well-maintained LF 8/6 fire engine on an Iveco Euro-Fire FF 100 EW chassis with single tires, size 12.5 R 20 147 K. Superstructure by Magirus with a rear-mounted Eurofire 8/8 pump, 600-liter water tank, lighting mast, and external power supply. Equipped with: hydraulic rescue set from Weber, including spreader, cutting device, and accessories. A generator from Kirsch, 5.5 kVA, and a TS 8/8 portable pump from Magirus with pneumatic lift/loading aid. (Timing belt of the TS replaced in 2020), 4 extension ladders, suction hoses, suction strainers, and other accessories. GVWR 10.5 t, unladen weight 7.06 t, trailer hitch 2.0 t with ball head, special signal system, auxiliary heater. Ndodoz D N Nwspfx Afujb Pleasantly smooth engine operation, maximum speed according to documents = 96 km/h. +++ Subject to errors, changes, and prior sale.

Condition: refurbished (used), Year of construction: 2023, operating hours: 2,048 h, functionality: fully functional, power: 310 kW (421.48 HP), year of last overhaul: 2026, Equipment: Standard Inventhor 6 package: Njdpfx Aszqrr Defuedb Load-Sensing system Fuel tank, 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system – additional electric pump for operating the following functions when the engine is stopped: raising/lowering/tilting the rear conveyor belt, opening/closing the comb flap, opening/closing the comb, raising/lowering the folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder tool box acoustic start-up warning Doppstadt telematics system Paint: RAL 2011, traffic orange Additional equipment: Drive train 310 kW - EV 400 mm chain track unit Size L shredding system chute extension 350 mm, watering system, left side rear conveyor belt 4.9 m over-belt magnet, neodymium frame for over-belt magnet * DoppBasket system can be retrofitted! * Delivery date to be agreed.

Condition: used, maximum load weight: 32,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 10,500 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 61 m³, Year of construction: 2012, Equipment: ABS, Air suspension, 1st and 2nd axle lift, BPW disc brakes, EBS, SmartBoard, aluminum rims, support jacks, PVC half-shell fenders, aluminum toolbox, extension ladder, fixed UFS made of aluminum, lateral AFS on both sides, sliding floor, front wall made of 40 mm aluminum-wood profiles, side walls made of 30 mm aluminum-wood profiles, sliding wall, resting hydraulic rear wall, gangway with ladder, PVC roll-up tarpaulin with central locking, loading pressure gauge, retarder, cargo area lighting. Ndodpezx I E Ajfx Afuob

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Ndodpot Dwibefx Afueb

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Nodpfx Afsyu Snusuodb Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Ladder rack pockets - Rear light bracket - Insert pockets Net price: €13,025.21 / Gross price: €15,500.00 Article number: ULM235482035.13 Technical data: • Brand: Unsinn • Model: ULM 4820-35-14 • Vehicle type: Long material trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 966 x 204 x 35 cm • External dimensions (L x W x H): 667 x 210 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Tare weight: 1,055 kg • Payload: 2,445 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Hollow profile construction welded and completely hot-dip galvanized • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Stable drawbar extension, can be extended without tools, free drawbar length approx. 3100 mm • Extendable rear light bracket 2000 mm, flush with the top edge of the loading area • Max. loadable with 200 kg of long materials at body length • Max. trailer overall length 12000 mm to be observed • 4x ladder rack pockets 100 x 100 mm embedded in the floor • 4x insert pockets L = 300 cm, 90 x 90 mm • Maintenance-free rubber spring axles • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extension Ndjdszy Dtlopfx Afuob • Stable long lever locks, recessed • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • 8 foldable lashing eyes, mounted recessed in the floor frame profile (600 DaN/kg) • 8 lashing eyes under the loading area • Maintenance-free rubber spring axle from ALKO • Axle with continuous axle body and individual wheel suspension • Reversing automatic • ALKO inertia coupling and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pole plug • Reinforced support wheel, for safe parking of the loaded trailer _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, maximum load weight: 25,280 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 04/2014, loading space length: 6,600 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 20 m³, Year of construction: 2014, Equipment: ABS, Stock No. 5707 Approx. 20 m³ Meiller compact tipping semi-trailer with hydraulic tilting gate / paving machine brake ----* Manufacturer: Meiller * Type: MHPS 42/2 * First registration: 04/2014 * Gross vehicle weight: 31,000 kg * Unladen weight according to vehicle registration document: 5,720 kg * Payload: 25,280 kg * Axles: 2 x BPW with 1st axle as lift axle / drum brakes * Suspension: Air suspension Ndjdpex S T Ncefx Afuob * Tires: 425/65 R 22.5 approx. 50% on steel rims * Color: Chassis black, tipping body grey, tarpaulin grey * EBS Wabco * Volume: approx. 20 m³ (6.60 m long x 2.40 m wide x 1.40 m high) * Hydraulically operated tilting gate with additional locking mechanisms * Roll tarp with tensioning straps * Operating platform at the front with access on the left * Full-load supports (aluminum prop supports) * Saddle height loaded 1.27 m * Paving machine brake * Individual fenders * LED reversing lights * Foldable underrun protection * Approx. 4.00 m aluminum extension ladder on the right German trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 674) First registered: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Ndsdpfx Afezful Nousb Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm TÜV (technical inspection) valid until: 06/2027, main inspection valid until: 12/2026 Roll-up tarpaulin, platform Clean floor, end pieces, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear, grain sliding hatch Remote control Cargo floor LED work lights + reversing lights 2 x 12-tonne, 2-speed geared winch Shovel and broom holder on the driver’s side, front Storage box, plastic, driver’s side, center Air suspension with raising and lowering function 1st lift BPW drum brakes Tires: 385/65R22.5, 1st tire approx. 70/80%, 2nd tire approx. 80/90%, 3rd tire approx. 60/60% ALCOA aluminum rims Extension ladder on the passenger side, rear Ladder behind the fifth wheel Half-shell fenders Price: €23,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, = Additional Options and Accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm mixing semi-trailer (Rental possible) Empty weight approx. 6400 kg (trailer only) - New - 2-axle - 10-ton SAF axles - 1x lift axle - air suspension, ABS - Tires 385/65 R22.5 - Technical total weight 38,000 kg EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Mixing drum in lightweight design Nsdoym Szfspfx Afujdb Mixing drum in lightweight version made of HARDOX S450 material Mixing spirals in lightweight version made of HARDOX S500 material Gearbox manufacturer ZF P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated Mixing control mechanical, start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with a service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge pan, and swiveling chute Drum locking to secure the drum during maintenance Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mud flaps made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive tank non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (Electronic mobile mixer control) Step on the underrun protection with grab handle Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete pipe (5 m long) Transition piece for self-compacting concrete pipe (reducing chute) Hydraulic chute support For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Additional Information = Year of construction: 2026 Usable material: Concrete GVW: 38,000 kg Make of the body: EuromixMTP EM 10 L Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for further information.

Condition: used, overall weight: 39,000 kg, first registration: 02/2020, loading space length: 9,750 mm, loading space width: 2,440 mm, loading space height: 1,900 mm, Schmitz Cargobull SKI 24 SL 9.6 – Three-axle tipping semi-trailer with aluminum box body, approx. 45 m³ Dimensions & Weights Internal box length approx. 9,750 mm, width approx. 2,440 mm, side wall height 1,900 mm Volume approx. 44.8 m³ Permissible total weight 36,000 kg (technical 39,000 kg) Payload approx. 30,280 kg Unladen weight only approx. 5,717 kg (lightweight version) Saddle height unladen approx. 1,250 mm Box / Body Aluminum box body (AK 9.6), inner wall thickness 3.5 mm, rounded lower belt Plastic lining on the floor (12.5 mm) incl. 900 mm extension on side and front walls Aluminum floor 5 mm Front wall inclined at 20° with robust supports for the front tipping cylinder Aluminum combination door 1/1 with door and pivoting function, pivoting frame, and crossbar Automatic, mechanical 4-hook locking system 2 grain slide gates with cover External rubber impact protection profile Work platform with access steps at the front left and ladder for box access Retractable access ladder at the rear A-sign for the transport of waste materials Roll cover / Tarpaulin PVC roll cover tarpaulin with tarpaulin winding profile and side stops Straight cover frame, 2 removable and swiveling crossbars with tension chain Tarpaulin operating rod (2,650 mm), fastening with tension straps and ratchets Chassis / Brakes EXTRA-Light chassis frame 9.6 made of fine-grain steel, welded ROTOS SCB running gear system with disc brakes (approx. 430 mm) Ndjdpfx Ajzvi Uaefusb 3 x 9-ton axles, air suspension Axle lift 1st axle automatic/pneumatic, electric starting aid EBS 2S/2M electronic braking system with RSP (Roll Stability Program) Automatic lowering during the tipping process, load pressure gauge Lifting and lowering device with AUTO-RESET function Hydraulics: Low-pressure cylinder HYVA (up to max. 190 bar) Wheels & Tires ALCOA aluminum wheels satin, 6-hole 385/65 R22.5 tires Bridgestone: 1st + 2nd axle road profile, 3rd axle construction site profile Other LED lighting system 24 V with multi-chamber lights, LED side marker lights, 2 separate LED reversing lights Reversing alarm, switched via reversing lights Lateral impact protection, underrun protection, fold-up King pin 2" according to SAE standard, replaceable Tow hitch front left Plastic mudguards with anti-splash dirt flaps Paintwork: Chassis Novagrau, box Pure White (RAL 9010), tarpaulin Red EC type approval with CoC, German registration documents

Condition: used, maximum load weight: 32,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 09/2027, loading space length: 11,250 mm, loading space width: 2,450 mm, loading space height: 2,240 mm, loading space volume: 61 m³, Year of construction: 2018, Equipment: ABS, Stock no. 5894 Approx. 61 m³ Langendorf tipper semi-trailer with combination door / aluminum rims / lift axle ----* Manufacturer: Langendorf * Type: SK * First registration: 10/2018 * Gross vehicle weight: 39,000 kg * Unladen weight according to vehicle registration document: 6,760 kg * Payload: 32,240 kg * Axles: 3x BPW with 1st axle as lift axle / disc brakes * Tires: 385/65 R 22.5, approx. 50% tread, on aluminum rims * Suspension: Air suspension with raising and lowering function Ndedpjz Em Tpsfx Afujb * Color: Chassis black, tipper body and roll tarp grey * EBS Wabco * TÜV (German technical inspection): 09/2027 * Volume: approx. 61 m³ (11.25 m long x 2.45 m wide x 2.24 m high) * Combination door with 2 grain slides * Grain chute with dust bag * 3 cross members * Access step inside the trailer, front left * Roll tarp with central locking * Operating platform at the front with access ladder on the left * LED tail lights * LED work lights * LED reversing lights * Foldable underrun protection * Individual mudguards * Water tank, left * PVC toolbox, left * Full-load supports (aluminum support props) * Approx. 4.00 m aluminum extension ladder, right * Approx. 1.40 m access ladder for the rear, left side * Spare wheel holder * Wabco Smartboard German trailer !! German documents !! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or the specifications. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish Ndedpfjutz Uyjx Afuob All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. Ndodpfx Afez Ebxyoujb About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, machine/vehicle number: TYBFEB01BLDD36083, mileage: 346 km, fuel type: diesel, fuel: diesel, color: other, Year of construction: 2026, Equipment list: Drive system: 4x2 Permissible total weight: 3500 kg Engine power: 110 kW Wheelbase: 2500 mm Cab: MB 0400 natural white Vehicle equipment Engine >>> Engine, R4, 110 kW (150 hp), 2620/min OM4 engine version, Euro VI Step E, Canter >>> Engine, start/stop system Clutch & Transmission >>> Manual transmission Axles & Suspension A86 Limited-slip differential >>> Axle ratio i = 4.111 (Canter) Wheels & Tires RN0 Steel rim 16.00 x 5.00 >>> Wheel center caps (plastic) >>> Tire manufacturer: Continental >>> Premium Seal tire repair kit RM6 Traction tires, complete 1.A. B21RLA 1F 2x 195/75 R 16 Regio Drive Continental VanContact 4Season 2.A. B21RLA 1F 4x 195/75 R 16 Regio Drive Continental VanContact 4Season Frame & Frame Components >>> Chassis ladder frame, reinforced CR8 Body mounting brackets on the vehicle frame >>> Main tank, 70 l OU3 AdBlue tank cover KA6 Cover, exhaust system >>> Bumper, 3-piece (plastic/steel) CO9 Scattolini rear underrun protection Rear underrun protection including integrated lamp and license plate holder. QQ2 MOSOLF, ball head for rear underrun protection ex works - towing capacity 3500 kg Braking system >>> Electronic Stability Program (ESP) >>> Disc brakes on front and rear axle with electronic wear indicator >>> ABS with electronic brake force distribution Exterior Cab >>> Comfort single cab >>> Tilting cab F62 Heated rearview mirror VB7 Short mirror arm including wide-angle mirror >>> Central locking, separate remote control Ndodjzhlv Rspfx Afueb >>> Immobilizer, with transponder Interior Cab >>> Driver's seat armrest SH6 Driver comfort suspension seat, horizontal suspension >>> Adjustable steering column holder SA5 Airbag, driver >>> Vinyl floor covering >>> Power windows for driver/passenger door, electric >>> Instrument lighting, infinitely adjustable JW0 Reversing warning EF3 MOSOLF, 2DIN touchscreen DAB+ radio, Apple CarPlay 2-DIN touchscreen radio, including extensive functions such as Apple CarPlay. >>> Operating voltage base vehicle, 12V H07 Automatic climate control >>> Glove compartment, lockable >>> Center storage compartment, dashboard >>> Storage box on the back wall of the cab >>> Storage, between the front seats >>> Cupholder >>> Storage above the windshield, 1 compartment Electrical System / Electronics EE9 Vehicle battery reinforced, 2x100Ah (2 batteries) OT6 Battery cover, double OV2 Preparation for battery disconnect relay 12V >>> Daytime running lights, automatic >>> Fog lights, halogen LH9 LED headlights LH6 Protective grille for taillights Body OS2 Scattolini three-way tipper, side walls aluminum ...

Condition: used, first registration: 12/1998, loading space length: 5,950 mm, loading space width: 2,400 mm, loading space height: 2,250 mm, loading space volume: 33 m³, total length: 7,300 mm, Equipment: crane, Equipment: * HMF crane container * Type 1063 K * Year of manufacture: 1998 * Internal dimensions: 5,950 × 2,400 × 2,250 mm * Load volume: 33 m³ * Overall length: 7,300 mm * Hydraulic HMF loading crane * Hydraulic grapple * Crane extension / boom * Hydraulic supports Nsdpfx Aozritujfusdb * Mechanical crane control * Work platform with railing * Access ladder * Two-wing rear doors If you have any questions, please do not hesitate to contact us!

Condition: used, maximum load weight: 29,970 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2019, loading space length: 8,300 mm, loading space width: 2,310 mm, loading space height: 1,970 mm, loading space volume: 38 m³, Equipment: ABS, VEHICLE NUMBER: 2977 ----* Exterior features: * Steel chassis * Rear tailgate with sealing * Additional tension locks for the tailgate * Work platform with access ladder * Roller cover * Loading pressure gauge * Foldable underrun protection * Aluminum rims * Tool box * Extension ladder with bracket * Bracket for broom and shovel * Outrigger * LED reversing lights * Warning sign ----* Technical specifications: * SAF axles with disc brakes Ndjdpfozkc N Hox Afueb * Lift axle on the 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 8/12, 2nd axle: 15/9, 3rd axle: 8/10 * Automatic lowering during tipping process * Tipping cylinder HYVA 250 bar * Fifth wheel height 1,150 mm - 1,250 mm * Loading height 3,600 mm * Unladen weight 5,530 kg * TÜV/MOT: 09/26 * Example lease-purchase: €389 per month, term 48 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location is possible. We offer trade-in, leasing, and financing options. We make it possible!

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Nsdpeyfvwbefx Afuedb Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin Ndsdpfx Afozz Ei Rjueb

Condition: excellent (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, conveyor belt length: 7,000 mm, conveyor belt speed: 50 mm/s, conveyor belt width: 1,000 mm, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours! TECHNICAL DETAILS Shredding system Type: Size L Number of roller teeth: 20 Ndedpfoxln Rlsx Afujb Feed hopper Loading height: 3,650 mm Feed width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Conveyor speed: 1.25 – 3.0 m/s MACHINE DETAILS Transport dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm Permissible total weight: 25,000 kg Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: STAGE V Fuel tank capacity: 500 l Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Longitudinal conveyor (conveyor length: 2,900 mm, conveyor width: 800 mm) Centrally arranged lubrication bars 24 V electric control system Full radio remote control Large side maintenance doors (GRP) Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, bilateral water spray Overband magnet (neodymium) Frame for 7 m overband magnet

Condition: new, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Ndjdpfszrkbgox Afueb Chassis * Regular ladder frame in lightweight steel construction with through-running crossmembers, with chassis frame extension. * Coupling plate approximately 8 mm thick * with a 2-pin kingpin according to DIN 74080 / ISO 337 Suspension * For indivisible loads, an increase in the total permissible weight is permitted. * Axle lift mechanism on the axle * 1 automatic axle lift control, load-dependent * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Manufacturer of your choice: Kögel Three-axle unit * with disc brakes Ø 430 mm * Embedding depth approximately 120 mm * Air suspension with approximately 180 mm travel. Vehicle tires * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5, AUSTONE ATH155 164K long haul Chassis components * Kingpin supports (manufacturer of your choice from Kögel) mechanically with leveling foot, approximately 24 t lifting capacity * One-side operation on the right side when driving * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5 * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with splash flaps between the 1st and 2nd axle * 1 pair of quarter-circle fenders with splash flaps behind the axles * Storage box for: 10 sideboards, folding stakes, and rear door/rear flap. Closed on all sides * Protected against spray, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installation at the rear, 1x left and 1x right * 1 pair of pull-out warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear area of the vehicle Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as a spring brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 plug connection * Wabco EBS system * Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving, behind the axle unit * Driving position adjusts automatically Floor * Plate floor approximately 30 mm thick * Recess pockets for square tube inserts approximately 80 x 80 mm, arrangement according to drawing J9 * 8 pieces of recess pocket strips (18 recess pockets per strip: 4 pieces each on the outside + 10 pieces in the middle) * Body meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approximately 27,000 kg Front wall * Storage for a maximum of 20 square tube inserts approximately 80 x 80 mm (length approximately 1,990 mm) on the inner side of the front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled sheet steel, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640 Rear wall * Hinged rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension rods and T-bar locking * 2 folding steps on the inside. Hinged steel corner posts at the rear, at

Condition: used, mileage: 8,361 km, power: 338 kW (459.55 HP), first registration: 04/2026, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G400227 Available immediately at our yard in Kaufungen. More information: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 3246 8x4 Meiller three-way tipper – Bordmatik – Year 2026 German Mercedes-Benz Arocs 3246 8x4 three-way tipper, manufactured in 2026, with only 8,361 km mileage. The vehicle is equipped with a Meiller TRIGENIUS D421 tipper body, left-side Bordmatik hydraulic side walls, an automatic transmission, automatic climate control, and extensive driver-assistance systems. Technical data: * Vehicle number: G400227 * Vehicle condition: Used * Category: Three-way tipper * Manufacturer: Mercedes-Benz * Model: Arocs 3246 * First registration: 04/2026 * Year of manufacture: 2026 * Mileage: 8,361 km * Engine displacement: 10,677 cm³ * Power according to vehicle data: 338 kW (460 hp) * Fuel type: Diesel * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Permissible gross weight: 32,000 kg * Unladen weight: 13,857 kg * Payload: 18,143 kg * Axles: 4 * Wheel arrangement: 8x4 * Leaf spring suspension, front and rear * Color: Ruby Red * TÜV (technical inspection): New * German vehicle Meiller tipper body: * Meiller TRIGENIUS D421 * Three-way tipper * Internal dimensions of the tipping platform: approx. 5,800 × 2,420 × 900 mm * Side wall height: 900 mm * Front wall height: 1,100 mm * Bordmatik on the left side * Bordmatik switching * Mechanical roll tarp * Tipping control in the cab * Meiller 9-piston hydraulic pump * Access ladder under the tipping platform * Lashing points in the tipping platform floor * Shovel and broom holder * Short protective canopy for the tipper body Cab and comfort: * M ClassicSpace cab * Automatic climate control * Hot water auxiliary heating * Comfort suspension seat for the driver * Passenger-side functional seat * Multimedia cockpit Interactive 2 * Navigation system * Digital radio * Reversing camera * Cruise control * Refrigerator on the engine tunnel * Rain sensor * Light sensor * Central locking * Electrically heated front mirror * Sunroof * Air horns on the cab roof * 24V socket Safety and assistance systems: * Active Brake Assist 6 Plus * Active Sideguard Assist 2 * Frontguard Assist * Lane Keeping Assist * Traffic Sign Assist * Attention Assist 2 * Reversing warning * LED daytime running lights * LED fog lights * Stone guard for the headlights * Tail lights with protective grilles Inspection and test drives are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Ndsdpoz Amvhefx Afueb

Condition: ready for operation (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, machine/vehicle number: 217, fuel tank capacity: 500 l, conveyor belt speed: 3,000 mm/s, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours and comprehensive additional equipment! TECHNICAL DETAILS Number of shredding teeth: 20 Shredding system type: Size L Feed hopper loading height: 3,650 mm Feed hopper loading width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Belt speed: 1.25 – 3.0 m/s Cross conveyor length: 2,900 mm Cross conveyor width: 800 mm MACHINE DETAILS Chassis: 3-axle drawbar trailer unit Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: Stage V Fuel tank capacity: 500 l Transport dimensions (L x W x H): 9,141 x 2,540 x 3,604 mm Permissible total weight: 25,000 kg Permissible axle load: 9,000 kg per axle Operating hours: 119 h Ndodpfx Asyg Iraefujb EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Centrally arranged lubrication strips 24-V electric control - additional electric pump for operating the following functions when the engine is off: - Raise/lower/fold rear discharge conveyor - Open/close comb flap - Open/close comb - Raise/lower folding hopper Full radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Hydrostatic drive 350 mm hopper extension, dual-sided watering provision 7 m rear discharge conveyor Neodymium cross belt magnet Frame for 7 m cross belt magnet

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Nedpjyfu N Aefx Afujdb Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: excellent (used), functionality: fully functional, mileage: 73,280 km, power: 213.29 kW (289.99 HP), first registration: 01/2007, fuel type: diesel, overall weight: 16,000 kg, tire condition: 95 %, axle configuration: 4x4, wheelbase: 3,600 mm, next inspection (TÜV): 06/2027, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, parking heater, trailer coupling, truck registration, MB ATEGO 1529 HLF 20 superstructure by Rosenbauer, all-wheel drive (4x4) Crew cabin for 1 + 8 personnel Differential lock L/W/H: 7300x2500x3400 mm 2000 l tank Pump: 2000 l/min, manufactured by Rosenbauer Normal pressure/High pressure Pneumatic front panel superstructure Surrounding lighting Roof box Storage for electrical equipment/lighting PA system storage/backrests in the cabin Martin horn system Front strobe Auxiliary heater Roof storage for extension ladder and 3-part sliding ladder Tool storage compartment Rear warning system Camera Extendable rotating ladder towards the cabin Roof monitor AHK Rockinger New inspections (MOT/emissions test/safety inspection) available upon request for an extra charge Asking price available upon written request Ndsdpfx Aszx Hgxefuob Sale without any equipment or accessories -Sale only to government agencies and commercial businesses- (no sale to private individuals) Sold as a used vehicle without warranty.