Used Face Mill for sale (10,636)

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Iisdpjzdk A Uefx Abvec Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Isdpowhm S Nsfx Abvsic Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: excellent (used), x-travel 600 mm y-travel 400 mm Ijdpfx Abezd Hg Ajvjic z-travel 400 mm Control HEIDENHAIN spindle turning speed - stepless 63 - 3150 U/min quill stroke 100 mm tool taper SK 40 table surface area 630 x 400 mm total power requirement 8,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel

Condition: used, Year of construction: 2001, x-travel 600 mm Iiodpfx Abezdvglevsc y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Iiodpfxjzcz Sre Abvec Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1114S49, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 26 mm, total height: 1,700 mm, total length: 7,000 mm, total width: 2,000 mm, overall weight: 3,000 kg, feed force Z-axis: 310 N, controller manufacturer: FANUC, controller model: SERIES 18i-TB, MANURHIN KMX 3260 CNC turning center - Stroke of the moving spindle carriage: 160 mm - Type of cross slide: two turret heads, 6 positions - Number of tool stations: 12 - For external machining: 1 - 12, for internal machining: 1 - 11 - With workpiece ejector - Stroke of the cross slide: 35 mm - Max. cross-section for external tools: 16 x 16 mm - Diameter of the internal tool holder: 25.4 mm - Ball screw diameter: 25 mm - Pitch: 5 mm - With C-axis - Driven tools - Incl. bar feeder FMB, type: TURBO 3-36 Note: The item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. Iijdpfszdzfaox Abvjc FCA D-79268 Bötzingen - loaded onto a truck.

Condition: excellent (used), 1 used, very well-maintained universal milling head, System "HURON", with hydraulic tool clamping and a blow-out function for cleaning the taper socket. Ijdpfszdbxbox Abvsic Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 SK - ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel table system "HURON" • Hydraulic tool clamping • Blow-out function for cleaning the spindle socket • For retrofitting to conventional, NC or CNC milling machines and panel saws or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) This high-quality milling head was used as a loaner milling head and was only used for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, chuck outer diameter: 225 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, A complete DMG MORI CTX alpha 500 V6 model, fully equipped! This machine features a C-axis, powered tooling, Y-axis, sub-spindle, and more. We acquired this machine in working order from production, and it can be inspected in working condition by appointment. Additional options & accessories: - Band filter system including high-pressure pump Iedpfx Abezc Nlaovjic - DMG CELOS software - 3-jaw chuck (SMW Autoblok KNCS-N-225-66) on the main spindle - 3-jaw chuck (SMW Autoblok KNCS-N-170-43) on the sub-spindle - Chip conveyor - Coolant gun - Various VDI-30 tool holders (6 powered, 4 static) - Original DMG mist extraction system - All original documentation Weight & dimensions: 4,300 kg 4066x2583x1829 mm (LxWxH)

Condition: used, total power requirement 7 kW weight of the machine ca. 3500 kg Iiodpfoy Nnyqex Abvsc dimensions of the machine ca. 2300x1900x2000 mm

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Iiodpfsyi A Tdjx Abvjc Storage location: Nattheim

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Ijdpfszd Tg Aox Abveic Location: Nattheim.

Condition: excellent (used), functionality: fully functional, Internal article number: 26073 Iodpfozd Twuex Abvjic Universal milling machine Deckel FP2 + Heidenhain digital display + Swiveling table Travel ranges: X450 / Y230 / Z400 mm Spindle speed range: 40-2000 rpm Tool holder: SK40 The machine comes from an educational institution and is in well-maintained condition. You are welcome to inspect the machine while it is powered on, in our over 500 m² heated storage area.

Condition: excellent (used), functionality: fully functional, Internal article number: 26072 Universal milling machine Isdpfxszd Ttis Abvsic Deckel FP2 + Heidenhain digital display Travel ranges: X450 / Y230 / Z400 mm Spindle speed range: 40-2000 rpm Tool holder: SK40 This machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: excellent (used), functionality: fully functional, Internal article number: 26071 Universal milling machine Deckel FP1 + Heidenhain digital display Travel distances: X300 / Y160 / Z340 mm Spindle quill stroke: 60 mm Power consumption: 1.9 kW Iiodpfx Aozd Thmjbvsc Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running, in our heated storage area covering over 500 m².

Year of construction: 2015, condition: excellent (used), Wanner mill (3) D25.50S, with blower, 6kW, inlet 38 x 51 cm, height 2.26 m, 24 knives, 2 pastry boards, 2015, Iiodjzd Dagspfx Abvoc

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223002360, milling height: 150 mm, input voltage: 400 V, overall weight: 700 kg, total length: 1,700 mm, total width: 1,000 mm, total height: 1,600 mm, input frequency: 50 Hz, milling length: 400 mm, pivoting range: 60 °, rotational speed (max.): 2,800 rpm, ELUMATEC AF 223/01 Notching milling machine - Rated current: 6.1 A - Power consumption: 2500 W Iodpfxozdyqnj Abvjic - Swivel range: up to 60° to the right and left - Max. milling depth: 110 mm - Max. profile height: 200 mm - Max. cutter diameter: 280 mm - Cutter mounting bore diameter: 40 H7 mm Attention: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-72770 Reutlingen - loaded onto a truck.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, CNC turning machine GILDEMEISTER CLX 350 V3 With DMG MORI SLIMline Multi Touch Fanuc I series control Year of manufacture: 2018 Turning diameter: 320 mm Travel in X: 242 mm Iiodpjzd Dlpjfx Abvjc Travel in Z: 540 mm Spindle bore: 65 mm Speed range: 20 – 5000 rpm With the following accessories: Sliding safety shield with interior lighting 12-station turret with 12 driven tool stations VDI 30 C-axis, tailstock with quill Programmable tailstock via M function Tool measurement in the work area Electronic handwheel Chip conveyor 3-jaw chuck, hydraulic, Schunk ROTA THW plus 0 210 mm Foot switch for chuck adjustment Parts catcher Glass scale in the X axis Coolant system with high-pressure pump 12 bar Coolant spray gun Operating manuals

Condition: used, bore 35 mm circle diameter 55 mm Iiedpfx Abjzdvaljvjc thickness 16, 10, 10, 8 mm Available sets: 1

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken Isdpob A Tagefx Abveic -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm Iijdpezdk Evsfx Abvjc c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. Iedpfx Abozd D Nujvjic 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis).

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets Iiedpfxszd Dize Abvoc • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor Iodsrw Arzopfx Abvoic 4th axis ready

Condition: good (used), Bühler PML2 Premium Laboratory Stirred Ball Mill Manufacturer: Bühler LTD, Uzwil, Switzerland Type: FPML2 Premium / PML2 Premium Machine Type: Laboratory Stirred Ball Mill / Bead Mill Application Area: Process development, dispersion, and fine grinding at laboratory scale For sale is a laboratory stirred ball mill from Bühler. The PML2 Premium is a modular laboratory system for the development and optimization of grinding and dispersing processes at laboratory scale. The system is suitable for research and development work as well as small-batch trials of various products. Application areas: Automotive OEM and refinish paint systems Anti-corrosion paints Industrial paints Color filters for display technologies Metal, ceramic and glass pastes Inkjet inks Liquid printing inks Liquid toners Agrochemicals Pigment concentrates TiO₂ dispersions Adhesives and sealants Technical data: Active grinding chamber volume: 0.2 - 1.2 dm³ Volume of grinding media tank: 2.4 dm³ Max. grinding media pressure: 7 bar Motor power: 2.2 kW at 3,000 rpm Rotor speed: 500 - 4,500 rpm Cooling water connection inlet: G 1/2" Cooling water connection outlet: G 1/2" Compressed air connection: G 1/4" Power connection: 400 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 16 A Machine dimensions approx.: 617 x 458 x 862 mm (W x D x H) Machine weight approx.: 150 kg Equipment: Bühler PML2 Premium grinding system Control panel / switch cabinet Grinding container system Pump units according to scope of delivery Piping and connections Existing documentation Further accessories as shown in the pictures Weights of the components: Machine: approx. 150 kg Hose pump: approx. 30 kg Gear pump: approx. 25 kg Laboratory hose pump: approx. 8 kg Attachable container: approx. 5 kg Tray: approx. 1.5 kg Condition: Used From a laboratory environment Optical condition as shown in the pictures Functional scope not fully tested Inspection possible by appointment Scope of delivery: Bühler PML2 Premium laboratory stirred ball mill Control cabinet Existing attachments Documentation Further accessories as shown in the pictures Iiedpfx Asuz Umysbvjc Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data and prior sale.

Condition: used, Year of construction: 1998, Technical details: x-travel: 2500 mm y-travel: 935 mm z-travel: 1000 mm table surface area: I 1615 x 800 mm table surface area: II 800 x 800 mm spindle taper ISO: 50 milling head speed: 60 - 3000 U/min feed speeds: 1 - 3000 mm/min rapid speed: 10 m/min total power requirement: 45 kW Isdpfezc I Ndox Abvjic weight of the machine ca.: 18,5 t dimensions of the machine ca.: 5 x 5 x 4 m with CNC HEIDENHAIN TNC 426 Universa Milling Head -C-axis automatic Horiz-Vertical - Intermediate angles manual table II 800 x 800 mm as B-axis ( rotary table ) coolant attachment and chip conveyor *