Used Filtration Device for sale (11,901)

Condition: used, This listing is for the Millipore MpodPilot Enerpac Pilotscale filtration system Rcedpfxoxhgaqo Anksb The unit is in full working condition and is ready for immediate use The Millipore MPODPILOT is a pilot-scale filtration system designed for laboratory and pilot plant applications. It is commonly used in processes such as microfiltration and ultrafiltration, particularly in the pharmaceutical and biotechnology industries. The system includes a filter holder capable of accommodating pod filters up to 2.2 m² in size

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer. Rodpfsytr Swjx Ankocb

Year of construction: 2009, condition: used, functionality: unexamined, Used Labopur mobile air filtration cabinet Manufacturer: Labopur Trionyx Rjdpfsy Nzryjx Ankjcb Model: NF X 15-211 Voltage: 220-240V (50Hz) Dimensions: 72cm x 82cm x 179cm (LxWxH) Worktop height: 86cm Equipped with H401 filter

Year of construction: 2016, operating hours: 2,840 h, condition: used, functionality: fully functional, machine/vehicle number: 68820, We are selling our automation system, freshly serviced in February 2026. Fully functional and in very good condition, can be demonstrated under power. It has been used on average 35 hours per month. Rjdpfjy Rl Smox Ankecb

Condition: new, machine/vehicle number: 111208990B, Binding speed: 300 bindings/hour Paper format: DIN A4 Cover spine width: 3.5 - 28 mm Rcjdpfx Aneh Eiayskjb Binding capacity: max. 280 pages (80 g / m²) Equipment / Additional information: 11 packages of materials

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Rcedpfounv Rxex Anksb Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633)

Condition: excellent (used), Available: immediately Redpfxjwv Ttps Ankocb

Condition: excellent (used), Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Rcsdpfxowv Tuae Ankob

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Rcodpfxsy A Tpqj Ankeb Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Used olive drilling machine Electro-pneumatic control with foot pedal 7 stops left/right with scale Rsdoxgp U Uopfx Ankjcb Height adjustable with handwheel L/W/H: 3400 mm / 700 mm / 1800 mm Weight approx. 90 kg Without warranty

Condition: good (used), Year of construction: 2022, operating hours: 8,212 h, functionality: fully functional, machine/vehicle number: 294A01A2200295, overall weight: 7 kg, type of input current: DC, input voltage: 24 V, We are offering a fully functional conveyor unit by Motan, model METRO SG HOS 05, year of manufacture 2022. Asking price: €499 (negotiable) We have both sizes available: HOS 05 (5 l) and HOS 10 (10 l). The clamping bracket for mounting to the hopper rail, shown in the picture, is not included in the price. Rodpfx Ajy Nnc Ejnkocb Sale is made without warranty and returns are excluded.

Condition: used, Year of construction: 1999, Year: 1999 Condition: functional Technical specification: - Maximum sheet format: 1120 × 780 mm - Minimum sheet format: 400 × 400 mm - Layer height: 40 to 165 mm - Maximum stack height: 1300 mm - Load capacity: 200 kg - Operating air pressure: 6–8 bar Rcsdpfx Aey Rqd Ujnksb - Electrical power consumption: 1.2 kVA POLAR Mohr Transomat TR 130 EL-4 The POLAR Mohr Transomat TR 130 EL-4 is an automatic unloading and stacking device designed for operation with high-speed paper cutting machines manufactured by POLAR Mohr. The unit automatically removes cut paper layers from the unloading table of the cutter and places them onto a pallet. This reduces manual handling, shortens auxiliary operating time, and improves the continuity and productivity of the cutting process. Operating principle After completion of the cutting cycle, the cut layer is transferred into the working area of the unit. The handling mechanism grips the layer, transports it, and places it accurately onto the pallet. The system includes a movable pallet tip which helps maintain precise alignment of the stack.

Condition: good (used), Offer 25348 Rcsdpfxey Nl A Ae Ankeb Technical data: - 15 units 300 x 200 x 100 mm - Left and right versions - Total weight approx. 250 kg

Condition: used, Year of construction: 2023, controller manufacturer: Sonstige, controller model: Formtracepak V6.1, _____ Description: Year of manuf. : 2023 Rjdpfsy Dy A Tox Ankscb Technical Data: Movement in X/Z:100/500 mm Clampingsurafce:600 x 450 mm Crossslide (X/Y):100/50 mm Equipment/Accessory: Formtracer:FTA-H4 D3000-D Contracer:C-3200 Surftest:S-3000 Operation:Control unit with Joystick Weiteres Zubehör:Turnable vice, calibration blocks, Protective tarpauline

Condition: good (used), Year of construction: 1994, machine/vehicle number: 4422550994025, Offer 26088 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat steel: 400 x 16 mm - or: 300 x 18 mm - Section Steel Shear - L- and T-iron at 90°: 130 x 12 mm - Square bar / round bar: 40 / 40 mm - Notching Unit - With square notcher for sheet metal up to approx. 13 mm - Notch depth approx.: 70 mm - Notch width approx.: 52 mm - Punching Unit - Punching force approx.: 60 t Rsdpey Nk Rlefx Ankscb - Throat depth: 400 mm - Stroke approx.: 10 to 50 mm - Punches steel up to Ø 31 in 15 mm - Electrical contact stop - Various punch dies and matrices - Drive: 400 V / 5.5 kW - Space requirement: W 1100 x H 2000 x D 1700 mm - Weight approx.: 2100 kg

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,250 kg, input voltage: 400 V, total width: 1,515 mm, total length: 2,060 mm, total height: 3,310 mm, volume flow: 15,000 m³/h, noise level: 77 dB, filter area: 160 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, ESTA FILTOWER F-160 W3 Filter Ventilation Tower Rsdpfx Aney D Nhfjkecb Industrial filter ventilation for welding halls – suitable for a variety of technological processes in manufacturing facilities. Application area: dust extraction, dry, granular material Top suction and draft-free bottom discharge – precisely at the work areas. Layered filter ventilation principle; no ductwork installation required. Cartridge filter elements – self-cleaning via compressed air pulses during operation. Filter cleaning based on differential pressure – no compressed air losses. Layered ventilation principle: contaminated air is extracted from above, filtered, and then released at floor level as clean, breathable air, without generating drafts. Precisely where workers breathe. Year of manufacture: 2016 Technical specifications: - Motor: 2 x 4.0 kW - Max. air flow rate: 15,000 m³/h - Max. negative pressure: 2,800 Pa - Sound pressure level: 77 dB(A) - Number of filters: 4 - Filter surface area: 160 m² - Dimensions (L/W/H): 2,060 x 1,515 x 3,310 mm - Weight: approx. 1,250 kg Stock no.: 1127

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping Rjdpfoulaxbox Ankocb - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Condition: used, Year of construction: 2011, functionality: fully functional, ABB Robotics IRB 2400L Robot Type B IRC5 M2004, Year 2011, DeviceNet Controller: IRC5 M2004 Number of axes: 6 Max. payload: 7 kg Max. working range: 1800 mm Year of manufacture: 2011 Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Spare parts are always available from stock. The robot is fully operational and can be inspected at any time. Redjy Nlhlepfx Ankocb 2-week commissioning warranty. No further warranty applies.

Year of construction: 2015, condition: used, functionality: fully functional, The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Rsdpfoyyxp Rjx Ankecb

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Rjdpfov Sag Nsx Ankecb Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Rodpfx Anewgizwskocb Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial Redpjvf Riuefx Ankjcb To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Rcsdpovibc Hefx Anksb Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: used, Year of construction: 2006, Conveying equipment + vacuum Mann+Hummel year of manufacture 2006 Rcedpfxjy N Sh Sj Ankob

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, Machine used for shot blasting of steel components; additionally, the machine is equipped with a wet dust collector, which enables blasting of aluminium parts (additional installation available at extra cost). -Year of manufacture: 2024 -Machine operating time: 2,000 hours -Mesh conveyor made of manganese, width 1,000 mm -Adjustable conveyor belt speed -4 turbines, 11 kW each, type Rutten Gamma 330 HD -Variable turbine speed regulation -Hot Spot chamber made of manganese and tool steel -Automatic parts detection -Automatic abrasive flow control Rcsdpjwvgbgjfx Ankob -Automatic abrasive refill -Automatic parts blow-off -Dedusting system: Rosler BF 40/40 -The machine allows the use of GH-grade extremely hard, sharp-edged blasting media -Turbine blades made of carbide guarantee 30,000 working hours -Turbine housings made of carbide offer even greater protection against machine body wear