Used Fireplace Template Fbu for sale (167)

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Hodpexak H Ejfx Ahasfh Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 Hfjdpoxak D Rsfx Ahash - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Hsdpjxak Hxsfx Ahajfh Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Year of construction: 2019, Used machine Hodpfjwka Ntsx Ahasfh Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm Hsdpfx Aoyxnx Sehasfh With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Travel: 120 mm

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Hfsdpew Titljfx Ahash Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2005, No. 3256 CNC machine for pallet production Sysmathick RPA9 + stacker Used, year of construction 2005, machine already dismantled Machine for assembling wooden parts with top and bottom nailing The RPA9 is a machine with circulation chains for the production of pallets in standard dimensions according to four templates (maximum 1600 x 1400 mm LW) Operation via a touchscreen Format changeover within a few minutes Two programming methods: Hodpfxjx Dddxe Ahaefh - digital programming via PC (input of coordinates) - Manual programming via touch screen Storage of tens of thousands of products Automatic control of the distance between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top 3x N58 & 3x N400, bottom 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-level pallets thanks to the heads Equipped with pneumatic cylinders Pneumatic pressing of the boards during assembly Minimum pallet dimensions 600 x 300 mm LW Maximum pallet dimensions 1600 x 1400 mm LW Maximum template dimensions 1700 x 1600 mm LW Maximum nailing capacity 1600 x 1400 mm LW Maximum pallet height 190 mm Minimum pallet height 110 mm Machine capacity 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 7BCR250, type of input current: DC, input voltage: 220 V, measuring range X-axis: 200 mm, measuring range Y-axis: 80 mm, measuring range Z-axis: 100 mm, bolt circle diameter: 350 mm, total width: 750 mm, total length: 460 mm, total height: 1,100 mm, overall weight: 115 kg, repeat accuracy: 0.01 mm, input frequency: 50 Hz, The Helios 350‑V is a high-precision profile projector designed to meet the demands of metrology laboratories, machine shops, and quality control departments. Manufactured in Italy by LTF S.p.A., it combines advanced optical engineering, mechanical robustness, and user-friendly operation, making it an essential tool for reliably measuring small and medium-sized parts. Its industrial-grade optical system delivers a sharp, stable image, ideal for inspecting contours, radii, angles, and complex geometries in a non-contact manner. The high-contrast illuminated screen enables profile viewing with excellent clarity, supporting comparison with templates, grids, or digital measurements. The Helios 350‑V features a smooth and stable stage, purpose-built for repetitive measurements with tight tolerances. It comes equipped with a digital readout system for console-based alignment and measurement (Quadra Check 2000). Its illumination system ensures uniform projection, even on parts with complex geometries or low-reflectivity materials. Constructed from high-grade materials with a rigid framework, it guarantees dimensional stability and long service life, even in demanding industrial environments. Hedpfoyuv Thex Ahasfh

Condition: used, color: other, first registration: 03/2002, Year of construction: 2002, Serial number: NO TEMPLATE Hfsdpsynzmmefx Ahajh We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 02/2002, Year of construction: 2002, Serial number: no template. Hsdpfxoynzk So Ahaefh We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating Hjdpfx Ahsv Iflpeaefh • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Hfedjxraimepfx Ahaoh Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Engraving machine including templates Hodpfx Aoywd I Hohajfh

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: - Robust German engineering for trimming, crosscutting, sizing, miter cutting, etc. - Operator controls placed overhead with swivel-mounted control panel at eye level, including template holder - 7" touchscreen control for electronically positioning cutting height, saw blade tilt adjustment, rip fence width stop, and optionally for scoring unit height and side adjustment; tool database for 50 saw blades and display of current RPM - Electromotoric height and tilt adjustment; saw blade tilt range from 0 – 47° - APA saw blade quick-release system; main saw blade RPM: 3000/4000/5000/6000 - Guard swings away on both sides, protective hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm - Rip fence with 1250 mm motorized cutting width - Sliding carriage with 3200 mm cutting length, lockable every 50 mm - Cross-slide with support roller and extendable support in both directions, mm scale length stop extendable up to 3500 mm, with 2 movable flip stops and 1 end stop; simultaneously usable as miter/fence stop, continuously adjustable from 0-46°, with automatic length compensation and index positions at 15°, 22.5°, 30°, 45° - Pushbutton control with electronic soft start (Start/Stop) - Electronic wear-free motor brake - Cutting length: 3200 mm - Max. cutting height: 155 mm at 90°, 105 mm at 47° - Motorized rip fence cutting width: 1250 mm - Cross-slide length stop extendable up to 3500 mm - Max. saw blade Ø 450 mm, Ø 400 mm blade can be retracted under the table - Cast iron table dimensions: 1200 x 665 mm; with additional table extension: 750 x 655 mm; table widening: 1430 x 940 mm - Table/working height: 900 mm - Extraction ports: 120 mm on machine body, 80 mm on protective hood - Motor output: 5.5 kW / 7.5 HP - Electrical supply: 400 V / 50 Hz - Sliding carriage, length and width fence profiles anodized - Machine body and swing arm powder-coated in anthracite RAL 7021; upper guard cover RAL 5000 violet blue; machine body RAL 7035 light grey - Required space: 7110 x 4150 mm - Weight: approx. 1050 kg, up to 1250 kg depending on configuration Hjdpfx Aow I Ummohaefh - CE compliant, GS tested, BG Wood Dust tested Special equipment: - Includes scoring unit 0.55 kW with electromotoric positioning for side and height adjustment via LED display and memory function; when the scorer is switched on, the unit automatically moves to the set position; when switched off, it automatically moves under the table to a side park position, allowing larger saw blades (over Ø 350 mm) to be used without removing the scoring blades - Includes MAIN SAW THREE-PHASE MOTOR WITH 7.5 kW (10 HP) instead of 5.5 kW - Includes Quickstep scoring system: Tool-free manual scoring width adjustment from 2.8 to 3.8 mm via index steps of 0.05 mm, incl. one set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 - Includes SWING-AWAY DEVICE FOR THE CROSS-SLIDE for quick and ergonomic movement to park position - Includes length stop with digital display on each stop flap, adjustable to 0.1 mm, max. length 3300 mm - Includes transport pallet

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Hfsdpfx Aoxhf Tijhaeh Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Mast Uri Well. The unit is in full working condition and is ready for immediate release. The Mast Uri Well is a cutting-edge dispensing aid that features a 96 LED template, specifically designed for the streamlined transfer of urine samples in the diagnostic process for urinary tract infections (UTIs). Key Features: 96-Well Template: The innovative design allows for efficient sample transfer across 96 wells simultaneously, facilitating bacterial identification and antibiotic susceptibility testing (AST). Semi-Automated Solution: Integrates seamlessly into the Mast Uri System, combining manual and automated processes for optimal laboratory performance. Benefits: Hfodpjxxy S Iofx Ahaoh Increased Efficiency: Automating the sample transfer minimizes manual handling, decreasing the time spent on sample preparation and allowing lab technicians to focus on other critical tasks. Improved Accuracy: The precise placement provided by the 96-well template minimizes risks of contamination and mis-identification of samples, ensuring reliable results crucial for patient outcomes. Enhanced Throughput: The streamlined workflow enables laboratories to process a higher volume of samples in shorter turnaround times, essential for timely diagnosis and treatment of UTIs. Cost Savings: By reducing the need for manual handling and minimizing waste through efficient sample management, the Mast Uri Well contributes to overall cost reductions in laboratory operations.

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case Hfjdpfjxqqyysx Ahaoh

Condition: not inspected (used), 3 pad printing machines with comprehensive accessories for sale Three pad printing machines are available for sale, all in perfect working condition. The machines only need to be adjusted to your specific printing templates. The package also includes: - At least 200 new, unused printing pads - New, etched printing plates (unused) - Additional accessories All machines operate flawlessly and are ready for immediate use once set up for the respective templates. Ideally, I would prefer to sell everything together as a complete package. Regarding the value of the pads: Hfedsyrut Uopfx Ahajh A single printing pad costs approximately €35–45 each, depending on the model, so the stock of pads alone represents a value of several thousand euros. If you are interested or have any questions, feel free to contact me. Videos of all three machines are also available! Just make me an offer.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Hsdpfot Hwzpox Ahaefh Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Hfjdpfjxzg Ubox Ahash Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. Hsdpfx Ahoxzg T Deajfh For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES This unit does not come with the Ion Torrent OneTouch ES Hfedpfx Aexzg T Rshash Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC 50/60Hz 0.5 Amp

Year of construction: 2022, condition: new, The semi-automatic Pneumatico PT-2800 table is ideal for the production of different sizes of pallets. Its construction allows for quick and easy change of dimensions of the pallets to be assembled, thus enabling the production of short series of packages. To operate the table, one operator is needed, who is able to pile from 180 to 210 pallets in an 8-hour shift (depending on the operator's skills and work organization). Two nailers with nails of different lengths are suspended on two spring balancers, which ensures more ergonomic work. Pneumatic clamps position blocks and square timber in the right place, which translates into higher quality and repeatability of a given pallet size. Pneumatic lifting of the pallet makes the whole process less tiring for the operator. Hsdeht E T Repfx Ahasfh • Work ergonomics: from 180 to 210 pallets within 8 hours of one operator's work • Compact design: the table surface is only 4.94 m² (53.17 ft²) • Versatility: the adjustable worktop enables the production of EUR pallets, 2, 3, 4 or 5 pallets brackets or squared timber • Time saving: quick conversion to a different pallet size • Pneumatic clamp: possibility of precise centering of the blocks • Pneumatic ejection of the pallet: to relieve the muscular system of the operator • Mast with balancers: smooth movement of the nails during operation • Additional template: the possibility of producing "bottoms" of the pallets • Adjustable steel anvils: bending smooth nails in the production of pallets • Innovation: the table diagonal adjustment module shortens the work by 50%; Dimensions of produced pallets: • Width: 900 - 2800 mm • Length: 1500 mm

Condition: used, color: other, first registration: 07/2010, Year of construction: 2010, Serial number: no template We have a stock of >100 axles. Hsdpewx Ixlefx Ahasfh Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 07/1995, Year of construction: 1995, Serial number: NO TEMPLATE Hjdpfx Aswx I Srjhasfh We have a stock of >100 axles. Please contact us if you can't find what you are looking for.