Used Fireplace Template Fbu for sale (164)

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Fgjdpfoyhduyox Ahnjc Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: good (used), Esterer SS45 full gang saw was technically completely overhauled Only visually the gate is no longer beautiful Passage 45 cm 340 upm Fgsdpfx Ahjfvb Etsnsc 500 stroke with complete hanging, saw blades and Templates with hydraulic roller lifting with splitting wedge with drive power 30 kW with hydraulic power pack with complete switch cabinet Please also visit my other advertisements. I look forward to your inquiry.

Condition: new, Year of construction: 2026, Machine designation: Gantry Nailing Machine for Pallet Production Manufacturer: Stoiber GmbH Model: StoNail 3000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit, Austria Description: • Semi-automatic gantry nailing machine for producing various types of pallets and crate components. • For loading loose blocks and boards, either a flexibly adjustable clamping system or a wooden template wall is available to ensure minimal setup times. Fgederalk Repfx Ahnjc • Divided into two work zones, the operator alternates between working on the left and right sides of the machine. • The nailing bridge can be equipped with up to 8 nailing units using jumbo coil nails (approx. 8,000 nails). By simultaneously activating the nailers, this machine achieves very short production cycles and high output rates. • Operation and programming of new pallet types is performed via a touch display. Existing programs can be accessed from memory at any time. Manual teach-in of nail positions is not required! • NEW – Robot for pallet stacking Technical data: • Max. pallet size (standard): 2,500 x 1,700 mm per side • Max. pallet size (optional): 3,500 x 1,700 mm per side • Max. nail length: 90 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 - 600 pallets/8 h • Machine operators: 1 – 2 persons • Low operating and maintenance costs

Condition: new, Year of construction: 2026, Machine designation: Portal nailing machine for the pallet & packaging industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2026 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Designed for manufacturing various types of pallets and box components Fjderallnepfx Ahnegc • Angled machine frame with wooden wall for templates • Divided into two work zones; the operator alternates between left and right operating sides • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types are performed via a touch display • Existing programs can be quickly retrieved from memory at any time • Entered parameters provide visualization of products on the touch display. No manual trial-and-error for programming nailing points! • NEW – Integrated pallet stacking robot! Technical Data: • Max. standard pallet size: 3,000 x 1,700 mm per side • Max. optional pallet size: 4,000 x 2,000 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets per 8 hours • Operators required: 1 – 2 persons • Low operating and maintenance costs

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Fodsq U R Etopfx Ahnegc

Condition: ready for operation (used), 03. gang saw Pini and Kay VU 65 HH e with splitting wedge with drive motor 45 kW with countershaft with saw blades with saw clamp Fedpjh Ict Eefx Ahnsgc with hook with templates with blower Location: Austria, near Steyr

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence immediately available Fgodpfx Aoqpdi Uohnsc Location: Austria, near Klagenfurt

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Fgjdpfx Ajw Dn S Aehnjc Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Fgodpoxg Ndisfx Ahnec Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Product features Superior performance: New TE module with special technique to ensure long service life. Precise temperature control technology ensures temperature flfluctuation of each well lower than 0.1℃. Unique bottom detection, compatible to reaction volume down to 5μl. Combination of precise light path system and super highly-sensitive PMT system ensures super high sensitivity and precision of flfluorescence detection. LED excitation light source of super long service life requires no maintenance. Brand-new automatic hot lid technology, free from manual operation, automatic open and close, effffectively prevent reagent evaporation. 6 channels flfluorescence detection, no crosstalk between difffferent channels. Equipped with whole block scanning and formulated line scanning mode, 96-well double-color scanning takes only 5.5s. Powerful software system: Operation interface in English language, simple to use. Multiple templates, easy to fifind experiments saved, and fast to set up new experiment. (HRM), SNP analysis, relative quantitative and isothermal amplifification. Humanized software with user friendly interface. Comprehensive analysis and report function, flflexibly print single and multiple sample reports. Fsdpfx Ahsuvdnnonjgc Custom gain and auto gain fully satisfy various experiment demand of difffferent users.Various analysis modes: qualitative/absolute quantitative, standard curve, melting curve, high-resolution melting curve. Powerful technical team： BIOER owns over fififteen years’ experience in professional PCR development and technical accumulation. BIOER provides comprehensive pre-sales technical support and after-sales application engineers. It owns professional reagent development team which can provide a full range of reagents independently developed to deal with compatibility of the upstream and downstream reagents, making scientifific research easier. Brand new never used. Please check our other listings as well.

Condition: good (used), Year of construction: 1995, Calender with 3 rollers Fasti main features: Length 1860 Sheet metal thickness max. mm. 0,75 Upper roller diameter mm. 40 Fgodpfx Asf Slq Sehnoc Several LED ceiling light templates

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 512 Alüminyum Pvc 3'lü Kol Yeri Delme Makinesi Yüksek Frekans Motorlu, - Complies with CE standards. - Possibility to open lock places, hinge slots, handle holes of PVC profiles - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system Fgsderana Ejpfx Ahnec - Universal template, possibility to make optional template - Possibility of triple drilling copy milling or grooving system to work as a single system - Comfortable working thanks to the powerful motor - High frequency motor (18000 rpm) - Cooling system OPTION - Right conveyor system (1 meter)

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one Fodpfx Asramz Hjhnegc - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 501 PVC KOL YERİ DELME KANAL AÇMA SU TAHLİYE MAKİNESİ, functionality: fully functional, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of PVC profiles. - Ability of copy head to work on vertical axis - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility to operate triple drilling copy milling cutter or grooving system as one - Comfortable working thanks to the powerful motor - Right conveyor system (1 meter) Fedpfx Ahjramz Aenjgc