Used Firewood Processor for sale (358)

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Hedpfx Afofn Tvhe Aofk Protection class: IP65

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors Hfedpedf Ufdjfx Af Aek A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Hsdpsdf Ufpofx Af Aofk Article number: HAW1700-EV-Funk

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter Hfsdpfx Afeupiaps Aek - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany Hodpfjuph Uxjx Af Ajfk The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. Hjdpfx Aoztb Elsf Asfk The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: used, Mayfran Emulsion Treatment System, Emulsion Processor, Chip Management – Used Machine Manufacturer: Mayfran Overall Dimensions: 3300 x 2100 x 2200 mm Type: RBF-SYSTEM S78480 Year of Manufacture: 2003 Hedjzqbnuopfx Af Aefk Processing and Filtration Capacity: 700 l/min Filtration Fineness: 40 ppm > 20 µm Tank Volume: 7250 l Pump Performance: 5.5 kW; 600 l/min; 5 bar

Condition: good (used), Year of construction: 2013, Coordinate measuring machine HEXAGON Optiv Classic 321 GL, serial number 6K012-3, with computer DELL Precision T3500, Intel Xeon processor, TESA Bugnon 38 remote control, purchased in 2013, last calibration 09/2017. Hfodpfx Afoztc A Sj Aok

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation Hfodpezt Nlmefx Af Aok MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: new, Year of construction: 2026, number of axes: 5, 5-Axis Machining Center for the Production of Modular Houses using Frame Construction Technology This 5-axis machining center is specifically designed for the production of structural elements for modular and frame houses. The machine enables precise machining of beams, columns, studs, and other wooden elements used in the prefabrication of walls, floors, and roof structures. Thanks to simultaneous machining in five axes, it allows for the execution of complex milling, drilling, cutting, and woodworking joint processing operations in a single working cycle, ensuring high accuracy, repeatability, and production efficiency. CONSTRUCTION: Hfjdpfx Afoztyl Ro Aok The machine's frame is made of steel and cast iron, providing high rigidity and resistance to overloads associated with the machining process. WORK SURFACE: The usable work surface of our machining center is 4000 x 4000 [mm]. Z-AXIS RANGE AND Gantry Clearance: 1200mm DRIVES: Our machining centers use SERVO motors to provide adequate acceleration and speeds in each direction. The X and Y axes are equipped with tried and tested helical racks, ensuring high durability and precision, while a high-quality ball screw drives the Z axis. All axes move on linear rail guides. SPINDLE: A powerful, high-end, brushless spindle with a power of 25kW drives the cutting tool. The spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter powers the spindle, and it has a higher power rating than the spindle itself, which protects against speed drops during operation under heavy load. TOOL MAGAZINE: The standard equipment of the machining center includes a linear tool magazine equipped with 6 HSK tapers. It is possible to equip it with additional tool magazine positions. SOFTWARE: The machine is equipped with appropriate CAD/CAM software. The software enables quick and easy design of elements, which the program then converts into so-called G-code. It is also possible to import ready-made files from other programs. CONTROL: The machine is controlled by a controller with its own processor and operating memory, ensuring stable and reliable operation.

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Hodpfozivkbex Af Aofk Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: good (used), Servo drive, servo card, input processor, control card, input card, control unit, converter, controller, servo module, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier -Manufacturer: Stöber, transistor amplifiers -Type: TAS 1016 Hfodpfozk D Tyox Af Aok -Input: 230 V 50/60 Hz -Output: 0...160V 10.3A -Dimensions: 270/220/55 mm -Weight: 3.4 kg

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Cutting capacity Saw frame, round timber: 250 mm Location: In stock at 54634 Bitburg Hjdehkz Hijpfx Af Asfk - immediately available - Subject to prior sale.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm Hfodpfx Afow U Tlzj Aok SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Hfsdpfx Ajiabu Usf Ask Mainly used seasonally so only 11,800 running hours.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation Hedey Au Eaopfx Af Asfk - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: used, Manufacturer ZOLLER GmbH Model Smile 400 Machine Type Optical CNC Tool Presetter / Tool Measuring Machine Measuring System Optical camera measuring system CNC-controlled measuring axes Hfodpfx Aszqdpbjf Ajk Automatic tool presetting Digital tool length and diameter measurement Measuring Capacity Maximum tool length: 400 mm Maximum tool diameter: 320 mm Maximum measuring radius (X): 210 mm These are the standard specifications for the Smile 400 platform. Tool Interface Installed with: SK50 measuring adapter Compatible with other Zoller adapters (HSK/SK/BT/CAPTO depending on tooling). Control PC-controlled measuring software Industrial Windows Embedded PC Optical camera measuring system Industrial PC ZOLLER IPC Model: ZQ57 / 9G (Chassis 5G) Intel Core i3 processor Windows Embedded 80 Plus Bronze industrial power supply LG DVD-RW drive USB ports Monitor HP EliteDisplay industrial monitor Power Supply Industrial IPC: 100–240 VAC 50–60 Hz 4–8 A Accessories Visible SK50 master gauge Multiple tool adapters Calibration/master setting tool Industrial keyboard Mouse Complete cabinet Measuring station Industrial PC Machine Configuration Granite measuring base Vertical measuring column Camera measuring system Computer workstation Optical presetting system Applications Suitable for presetting: End mills Face mills Drill tools Boring bars Shell mills ISO40 ISO50 SK40 SK50 HSK tooling (with appropriate adapter) Approximate Weight Approximately 215 kg for the measuring unit (excluding workstation and accessories).

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Hsdpozk Npgsfx Af Aefk Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: new, functionality: fully functional, power: 17.1 kW (23.25 HP), fuel type: diesel, color: orange, overall weight: 2,200 kg, operation weight: 2,200 kg, maximum load weight: 1,200 kg, tire condition: 100 %, shovel volume: 0.4 m³, digging bucket width: 140 mm, suspension: steel, Year of construction: 2026, Equipment: 4 in one shovel, all wheel drive, cabin, hydraulics, pallet forks, ☀️ Summer Price: Only €16,799! The TEC-POINT YX918 is a compact, robust, and versatile wheel loader for professional users who are looking for a machine that is ready for immediate use and has a strong range of features. Whether on the farm, construction site, in gardening and landscaping, in agriculture, in municipal operations, in the warehouse, or on commercial properties – the YX918 impresses with its compact dimensions, easy operation, solid technology, and a comprehensive range of accessories. Equipped with a proven Kubota V1505 diesel engine, a closed comfort cab, hydraulic joystick pilot control, quick coupler, 4-in-1 bucket, and pallet forks, this machine is ready for daily use right away. Your advantages at a glance ✅ Kubota V1505 diesel engine – proven, reliable technology ✅ Year of manufacture: 2026 ✅ New / unused ✅ 17.1 kW engine power ✅ Closed comfort cab with heating ✅ Adjustable comfort seat ✅ Hydraulic joystick pilot control for precise work ✅ Electric control handle ✅ Quick coupler for quick attachment changes ✅ 4-in-1 bucket included ✅ Pallet forks included ✅ Additional hydraulic function for attachments ✅ Boom lowering protection for increased safety ✅ Work lights ✅ 1,200 kg lifting capacity ✅ 0.4 m³ bucket volume ✅ 2,200 kg operating weight ✅ CE marking available ✅ 12 months warranty ✅ Spare parts and service directly from TEC-POINT ✅ Immediately available ✅ Europe-wide delivery possible The TEC-POINT YX918 is the right machine for: Agriculture and farm work Gardening and landscaping Construction sites and building yards Municipal operations Warehouses and commercial properties Equestrian facilities Firewood production Pallet handling Material transport Private users with professional requirements Whether it's earth, gravel, sand, wood, feed, building materials, bulk goods, tools, or pallets – thanks to the combination of a 4-in-1 bucket, pallet forks, and quick coupler, the wheel loader can be used flexibly and is ready to work immediately. Technical data Manufacturer / Brand: TEC-POINT GmbH Model: YX918 Machine type: Wheel loader / compact loader / farm loader Condition: New / unused Year of manufacture: 2026 Engine: Kubota V1505 diesel engine Engine power: 17.1 kW Operating weight: 2,200 kg Payload / lifting capacity: 1,200 kg Bucket volume: 0.4 m³ Gradeability: 25% Minimum turning radius: 2,000 mm Maximum dump height: 2,300 mm Maximum dump reach: 700 mm Tire type: 20.5-16 Tire pressure: 350 kPa Cab: closed, with heating Control: hydraulic joystick pilot control Operation: electric control handle Steering: hydraulic Braking system: hydraulic Condition, service, and availability The machine is new, unused, factory-tested, and ready for immediate use. With us, you not only receive the wheel loader, but also the corresponding service: ✅ 12 months warranty ✅ Spare parts directly from our warehouse in Rheda-Wiedenbrück ✅ Personal service from TEC-POINT ✅ Inspection and testing possible by appointment ✅ Europe-wide delivery by freight forwarder possible Location 📍 Rheda-Wiedenbrück Come and visit us, test the TEC-POINT YX918, and see for yourself the features, ease of operation, and range of applications. Inquire now Hsdpfeyky E Hex Af Aofk Secure your individual offer for the TEC-POINT YX918 wheel loader. The machine is immediately available and can be delivered throughout Europe on request.

Condition: used, Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / put 18.000 Ex/h (depending on type, size and  properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Control: micro-processor based control unit with adjustment of lead-time and length of the glue  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Hodpfx Aswqftkof Asfk

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Hedpfjt Hwrnox Af Aofk Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) Hjdpfx Afey Ucy Ns Ajfk - Detection & rejection: - Detection of fallen, tilted, higher or lower bottles - DELTA reject system - Vision system: - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) - Detection & rejection: - Detection of fallen, tilted, higher or lower bottles - DELTA reject system Hjdoy Ucyvjpfx Af Aefk - Vision system: - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) - Capacity: 2,000 – 6,000 bph - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) Hedpfxsyb S S He Af Ajfk BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Condition: good (used), PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU, processor, Microbox PC Hfjdjuuu Ezopfx Af Ajk -Manufacturer: Siemens, Simatic Microbox PC Simatic IPC427C -Type: 6ES7647-7BJ30-3XM0 -Dimensions: 320/165/H70 mm -Weight: 2.7 kg