Used Flanged Ball Valve for sale (9,955)

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters Ncodpfx Aofn Tu Tob Ton A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope Ncjdpsfn Tvijfx Ab Tsn ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...] Nsdpfx Absfn Tvhe Tocn

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm Ncsdpfx Abodf Ufdj Tsn The winch is there to the

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: Nedpfxodf Ud Sj Ab Tscn

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg Nsdpfx Ajfn Tvkeb Tocn ⦁ Color [...]

Condition: used, BOSCH proportional valve NG16, NG6- removed from K-Tec 350 3F - removed from running machine - fully functionalmanufacturer: BOSCH  Nsdpst Sbfvjfx Ab Tjcn type: NG16, NG6 manufacturer no.:   spare part no.: 1type code: 4WRLE 16 X200M-3X/G24K0/A1WG02M-776 The number before the first slash describes the appliance series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,971 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: electric, mast type: other, construction height: 2,800 mm, battery capacity: 930 Ah, remaining battery capacity: 88 %, battery voltage: 80 V, DGUV certified until: 02/2027, fork length: 1,800 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lift height: 4,100 mm Overall height: 2,800 mm Year of manufacture: 2019 Operating hours: 1,971 STILL 4.0 ton electric forklift with full cab and heating, very few hours, excellent battery, good tyres (new at the rear), telescopic full free-lift mast, Meyer fork positioner with side shifter, mini-levers, two-pedal system, Blue Spot front and rear, lighting, fork length 1,800 mm, charger included. The following options/upgrades are available upon request (price on application): - Single-pedal system instead of two-pedal - Different fork length - Lighting according to German Road Traffic Regulations (StVZO) Ex-works price, including 1,000-hour service as per STILL manufacturer guidelines and valid FEM (UVV) inspection upon sale. Ncodpfoyhu Uwjx Ab Ten Viewing, demonstration, and test drive available by prior telephone appointment. Sale exclusively to business customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our newly redesigned website.

Condition: new, • KSB / amri BOAX-SF butterfly valve • Diameter: DN200 • Working pressure: PN16 • Seal: EPDM (for water, HVAC, industry, fire protection) • Temperature range: up to 130°C • Material: ductile iron with epoxy coating • Actuation: manual lever with locking positions • Valves unused, stock item, year of manufacture 2021 • Ready for operation, 100% functional • Ideal for water, industrial, hydrant, and fire protection installations. - PRICE LISTED PER VALVE. Ncedpjxyq Icefx Ab Tsn

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve Ncsdpfx Asyhbp Uob Ton -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Solenoid valves: Type 573718 / 533342 5 pieces -Individual components: see photos -Price/Fee: complete -Dimensions: 150/140/H70 mm -Weight: 0.9 kg

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used Ncsdju Nuycopfx Ab Tjn

Condition: used, Quantity available: 29 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 65 Ncedpfxjygnb Io Ab Ton Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: new, functionality: fully functional, machine/vehicle number: BLCV-00716, Description for Spare Part Number 399-8414 A Boom Lowering Control Line Check Valve is used to regulate the flow of hydraulic fluid within the boom lowering control circuit. It features integrated seals to ensure a leak-proof seal, effectively preventing any hydraulic fluid leakage. The main function is to allow hydraulic fluid to flow in only one direction—from the hydraulic pump to the hydraulic cylinder that manages the boom lowering operation—while blocking any reverse flow. Compatible Models for Spare Part Number 399-8414 EXCAVATORS Nedpfsx Sqpaex Ab Tjcn 390F, 390F L, 374F, 374F L, 390F MATERIAL HANDLERS MH3295 Attributes: • Designed to withstand high pressures and elevated temperatures encountered during machine operation • Supports the stability of the boom Applications: The Boom Lowering Control Line Check Valve serves as a one-way flow control component, ensuring reliable operation and safety of the boom lowering control circuit by maintaining the correct flow direction and protecting against potential damage.

Condition: ready for operation (used), Year of construction: 2021, Offered is a valve bag filling system (50kg) with connected palletizer. Bag type: valve bags (paper, PE or PP), filling weight: adjustable up to max. 50kg, piping system with integrated conveying screw / dosing screw, pneumatic bag clamping, weighing unit, discharge conveyor belt. Automatic layer palletizer - Ehcolo PM 400. Year of manufacture: 2001, capacity: up to approx. 400 bags per hour, incline conveyor / bag flattener, empty pallet magazine, complete machine enclosure. Inspection possible by arrangement. Ncsdpfsylzg Uex Ab Tsn

Condition: new, Year of construction: 2025, - Capacity 4 mm - Hydraulic roller adjustment - Foot control - Brake motor - Hydraulic pressure adjustment Nodsq Tdm Ajpfx Ab Tecn - With 3 sets of rollers - Emergency stop - 400V

Condition: good (used), Year of construction: 2017, You can purchase a folding bench – manual swing bending machine from the top manufacturer Schechtl here. The machine has been well maintained and is now being replaced by a motorized model. Handover will only take place once the new machine is delivered. Bending length approx. 3.10 m. Bending capacity 1 mm steel – more for aluminum. Thick and thin clamping bars included. Optional depth stop (see picture). Njdpfjylug Isx Ab Tjcn

Condition: used, Ball transfer table 2000-1007-1000 RA2407 Technical data: Year of manufacture: unknown Condition: good (used) Njdpfowhtc Iex Ab Tecn dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Belt conveyors GF 2250-680/600 with 2 x 90° pushers (from slides) Make: Kannegiesser like new, showroom machine Year 2014 Length: 2.250 mm Belt width: 600 mm Total width: 680 mm incl. 2 piece pneumatic 90° off valves Wxh = 550 x 320 mm incl. 2 PCs. supports, height OK belt + 1000 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Njdpfok Aa D Eex Ab Tocn Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Homag Edgeteq S 300 / KDF 440 C Edgebander Variable feed speed 8–14 m/min Boomerang TFU 140/20 interface Upper roller pressure Separating agent spraying unit for workpiece Joint trimming unit 40 mm joint cutter set Interface for Baltivan pre-melter QA65 N 1200 / 1400 gluing station Coated tank for EVA/PU adhesives Edge magazine for 3 mm and up Edge thickness up to 8 mm Pressure zone with 2 additional pressure rollers Front and rear edge lubricant End trimming unit Antistatic solution spraying system Multi-stage trimming unit Copying / profiling unit Multi-stage scraper MZ40 unit Workpiece cleaning agent spraying unit Brush unit with 2 motors PowerTouch control system The machine is sold without tools Njdpfeymz T Rsx Ab Tocn Only approx. 1,300 operating hours! Available April 2026

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 900 mm, total length: 2,020 mm, total height: 1,000 mm, sheet thickness steel (max.): 1 mm, Sheet thickness 0.35 - 1.2 mm, production dimensions 125 mm - 1250 mm, motor power 2x 1.5 kW, working speed 24/10 rpm, cold-worked steel and galvanized steel, production of elbows with diameter 200-1000 mm and straight pipes with diameter 200-1000 mm, guide rails and spare rollers included. Prices excluding VAT. Nedpfxeymcvto Ab Tjcn

Condition: used, Technical details: tube diameter: siehe o mm wall strength: siehe o mm voltage: 230 V / 1Phase V Nsdpfx Abou Icu Sj Tjcn total power requirement: 0,55 kW machine weight approx.: 56 kg dimensions L x W x H: 0,45 x 0,37 x 0,35 m HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar) and copper pressure-controlled There is a flaring tool for the size Ø 14mm on the machine. The operating pressure is variably adjustable. *

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 211619.00, grinding wheel diameter: 275 mm, mount diameter: 160 mm, 2 new unused grinding wheel flanges Reishauer part no. 211619.00 for grinding worms Ø275 / 160x160 RZ160 / RZ260 Njdpfx Abjx Eiyce Tscn Flange for mounting grinding tools with a bore diameter of 160 mm and a width of up to 160 mm 300x160x160 All technical data subject to possible typographical errors/mistakes. Price on request Sale exclusively within EU countries.

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Njdpfxevk D Tde Ab Tocn Sheet thickness max. 1.75 mm.

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Nsdpfx Abeh I T Nre Tjcn Diameter 63 mm Diameter 50 mm Diameter 40 mm In good condition.

Condition: used, max. width of grinding wheel 104 mm diameter / bore of grinding wheel 160 mm Ncodsu Sbdyspfx Ab Ten Flange taper compatible with NZA, AZA, RZ301E etc.