Used Flat Bed Cnc Lathe for sale (17,108)

Year of construction: 1994, condition: used, A CNC lathe with counter spindle including accessories is offered for sale. Spindle bore: Ø 32mm. Machine hours: approx. 47000. Control system: Siemens Sinumerik 820T. Equipped with a 16-station Sauter tool turret VDI20, Röhm KFD-HS 140/3 main spindle three-jaw chuck, Marquart Quadro NC collet chucking system, counter spindle collet holder 173E and Tebaron TEB/AH1 mist extraction unit. Accessories: approx. 85 VDI20 tool holders with blanking plugs, 173E collets from Ø 3-42mm, three new sets of soft jaws and additional jaws, optical tool measuring device and VDI20 turret alignment bar. The cutting tools shown are not included. Control modules defective. Inspection possible by arrangement. Fjdpfx Amo Aih Ede Esgi

Condition: used, Year of construction: 2014, CNC Lathe Manufacturer: GOODWAY Model: GS 280 Year of manufacture: 2014 Control system: FANUC Series Oi-TD Technical details: Control system: FANUC Series Oi-TD Swing over bed: 670 mm Swing over carriage: 500 mm Max. turning diameter: 400 mm Max. turning length: 600 mm Spindle nose: A2-8 Spindle bore: 90 mm Front bearing diameter: 130 mm Spindle speed: 35 – 3,500 rpm Number of tool stations: 12 positions Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Fodpfxozvzaus Am Eegi Subject to technical changes, errors, and prior sale.

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Fgedpoum H Ekofx Am Eoi Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 210 mm, travel distance Z-axis: 550 mm, 2018 LEADWELL LTC-208 CNC Turning Center - Maximum Turning Diameter: 380 mm - Maximum Turning Length: 440mm - X-Axis Travel: 210 mm - Z-Axis Travel: 550 mm - Hydraulic Chuck Diameter: 254 mm - Main Spindle Motor: 15 kW Fodpfo Ah Hwfjx Am Eegi - Tool Turret: 12 stations - RECORDED RUN TIME: 518 HOURS 18 MINUTES 29 SECONDS - Electrical: 220 V / 3-phase / 50–60 Hz / 30 kVA - CNC Control: FANUC - Equipment: Tailstock, chip conveyor and coolant system Free loading at customer's truck

Year of construction: 2012, condition: used, overall weight: 3,400 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 1,000 mm, Turning length max.: 650 mm Spindle speed: 4500 - rpm Weight approx.: 3,400 kg Control: Heidenhain Manual Plus Dimensions (LxWxH) approx.: 3500 x 1800 x 1000 mm Fjdps Aimnmjfx Am Ejgi Year of construction: 2,012 Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: Yes

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Fgjdpfoz St Tqex Am Esi Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Fodoz At Abspfx Am Ejgi Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center Fodpfx Amjz Ih A De Esgi 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: used, Year of construction: 2005, Control: FANUC 18-iTB Options: Interface for bar feeder magazine Part catcher for turned parts, max. part length 120 mm and ø 65 mm incl. part conveyor belt, on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the subspindle with ejector hinged belt chip conveyor, on the right-hand side, without chip cart Bar loader FMB Turbo 5-55 Fsdps Ai Eatjfx Am Ejgi

Condition: used, Year of construction: 2006, Control system: Fanuc D-iT. Fgedpfx Amo Ai Eq Ts Esi

Condition: ready for operation (used), Control system: Fanuc 310i Workpiece diameter: 2000 mm Max. turning diameter: 2400 mm Max. workpiece height: 1800 mm Vertical travel of the ram: 800 mm Fgedpfx Ae Ah R N Aem Esi Horizontal travel of the ram: 1400 mm Feed rates: 10 m/min horizontal, 5 m/min vertical Max. spindle power: 45 kW AC Travel of the cross slide: 1200 mm Tool changer (ATC): 2 units (on each side) Tool positions per changer: 8 each Machine weight: approx. 30 tons

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2009 - RETROFIT 2019 Control : Siemens 840 D Turning diam. : 200 mm Turning length : 550 mm In General: Year of manufacture:2009 - RETROFIT 2019 Control system:Siemens 840 Dsl Bar capacity:65 mm Main spindle Technology:Direct drive spindle Speed:5,000 rpm Max. power:33 kW Max. torque:150 Nm C-axis:0.00014° Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Fjdpfx Amo Ah Adfe Esgi Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:22 kW Max. torque:100 Nm C-axis:0.00014° Z-axis:700 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret on cross slide Number of stations:14 Tool holder:VDI 25 Tool drive:8,000 rpm, 16 Nm X-axis:110 mm Y-axis:100 mm Z-axis:320 mm Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Number of stations:14 Tool holder:VDI 25 Tool drive:8,000 rpm, 16 Nm X-axis:110 mm Y-axis:100 mm Z-axis:550 mm Tool carrier III (X/Y/Z): Technology:Tool turret on cross slide Number of stations:14 Tool holder:VDI 25 Tool drive:8,000 rpm, 16 Nm X-axis:180 mm Equipment: Chip removal:Chip conveyor Coolant supply:Pump station Bar feeder:Irco Profimat Part removal:Part gripper + indexing belt Chucks:2x Hainbuch chucks Tool holders:Various static and driven holders : Note:The machine was overhauled (retrofitted) by Index in 2019

Condition: used, Year of construction: 1996, operating hours: 22,400 h, functionality: fully functional, machine/vehicle number: 474, -Weiler -E50/1 -No.: 474 -Year of manufacture: 1996 -Operating hours: approx. 22,400 Fedpfxoy U Iqgo Am Eogi -Voest-Alpine Steinel control system (the control system likely operated via a separate desktop PC) -Includes chip conveyor, various tool holders, and tools Shipping possible upon request. Sale only to commercial businesses. Stated purchase price = net price plus 19% VAT = €9,282.00 gross.

Condition: used, Year of construction: 2004, Year of manufacture: 2007 Control system: FANUC 18-iTB Fgjds Ai D Hcspfx Am Eji Options: Interface for bar feeder magazine Part catcher for bar turning parts, max. part length 120 mm and ø 65 mm incl. part conveyor belt, located on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the counter-spindle with ejector hinged band chip conveyor, located on the right-hand side, without chip cart Bar loader: IEMCA

Condition: ready for operation (used), Year of construction: 2012, overall weight: 6,000 kg, CNC capacity 2000x800mm spindle bore 106mm Fgsdpfe Ahq Dxox Am Eei total power 45kW weight 6000kg

Condition: used, Year of construction: 2011, operating hours: 39,210 h, functionality: fully functional, spindle bore: 42 mm, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 19 W, feed length X-axis: 125 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 400 m/min, overall weight: 5,500 kg, spindle nose: A2-5, Equipment: documentation/manual, We are offering this used INDEX C100 CNC turning machine, manufactured in 2011. Manufacturer: INDEX Machine type: C100 Year of manufacture: 2011 Rated voltage: 400 V Rated current: 70 A Short-circuit current I₍CU₎: 50 kA Current I₂: 3.6 kA Maximum pre-fuse: 100 A Rated power: 41 kW Connected power: 49 kVA Frequency: 50 Hz Control voltage: 24 V DC Fgedpj Aibutsfx Am Eei Machine type: CNC turning machine If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning length: 1,035 mm, turning diameter: 390 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,045 mm, MSD-501 TA II (Fanuc) cnc control main spindle: 3-jaw chuck sub spindle: 3-jaw chuck C-axis driven tools 12-fold revolver chip conveyor coolant device portal loading device without function Technische Daten: / technical details Fjdpfxo Ah Sbio Am Esgi Umlaufdurchmesser über Bett / rotary diameter over bed 680 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 510 mm Drehdurchmesser / turning diameter 390 mm Drehlänge / turning length 1035 mm X-Achsen Verfahrweg / X-axis travel 235 mm Z-Achsen Verfahrweg / Z-axis travel 1045 mm max. Drehzahl / max. spindle speed 3500 UpM /rpm Anzahl der Revolverplätze / numbers of tool places 12 max. Stangendurchlass / max. bar diameter 73 mm Gewicht ca. / weight ca. 5600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding

Condition: used, CNC turning machine MONFORTS, Type RNC 300 MultiTurn with powered tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Turning diameter over bed slide cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - hydrostatic guides for the X, Y and Z axes - with tailstock - main spindle with chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws Fgsdezfau Aepfx Am Eoi - collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 powered tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Fedpfx Ajzufi Rom Ejgi Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: used, machine/vehicle number: 1047, Used lead screw and feed spindle lathe WEILER LZ 280 Center height 125mm Center distance: 800mm Spindle diameter: 24mm Fsdps Ah Tl Djfx Am Ejgi Spindle speeds from 50-1,600 rpm with 3-jaw chuck Ø 125mm, quick-change tool holder size A with 2 holders, Digital display with scale for cross travel (1-axis), chip guard, control panel with switch cabinet, tool cabinet. Machine has been partially overhauled and repainted. Machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by appointment.

Condition: used, Year of construction: 2000, functionality: fully functional, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW Fgedpfx Aeqn A Rnom Eji generator - rated current 95,00 A connected load 65,00 kW

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Fgodpfjymfmnjx Am Eei

Condition: used, Year of construction: 2015, operating hours: 21,000 h, functionality: fully functional, turning length: 700 mm, turning diameter: 400 mm, spindle bore: 88 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 24,000 W, overall weight: 5,800 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Tool holder VDI40, machine is used, geometry and accuracy checked by MT EVO Fgjdpfsxdbkvsx Am Eji

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter 850 mm Fgodpfjyhrb Usx Am Eji turning length 2200 mm control Siemens 840 D

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement. Fjdpfx Ao Ahkvzom Eegi