Used Flat Bed Cnc Lathe for sale (17,096)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,176 h, functionality: fully functional, machine/vehicle number: 02260007541, turning length: 600 mm, turning diameter: 680 mm, spindle speed (max.): 5,000 rpm, controller model: Siemens 840 D, power: 25 kW (33.99 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 600 mm Turning diameter: 680 mm Maximum spindle speed: 5,000 rpm Fgsdpfx Apjzpxgfjwjf MACHINE DETAILS Control system: Siemens 840D Spindle power: 25 kW Spindle operating hours: 65,176 h EQUIPMENT Chip conveyor Self-centering chuck: 250 mm diameter

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Fgodpfx Apjzq Ur Tewsf Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Fodpex A E Tfsfx Apwjgf Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Fgedpfshwi U Tex Apwjf Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Fgedjum H Ekopfx Apwsf Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 25693, turning diameter: 150 mm, Specifications: Number of Axes: 3 Maximum Workpiece Diameter: 300 mm (approx.) Maximum Workpiece Length: 300 mm (approx.) Chuck Size: 6” (standard, options for larger sizes) Machine Dimensions: 2,400 mm x 2,200 mm x 2,500 mm (approx.) Machine Weight: 3,200 kg (approx.) Spindle Speed: Up to 6,000 RPM (standard) Spindle Power: 15 kW (continuous) Spindle Torque: 75 Nm Spindle Bore: 65 mm X-Axis Travel: 300 mm Y-Axis Travel: 250 mm Z-Axis Travel: 300 mm Rapid Traverse (X, Y, Z): 20 m/min (maximum) Fjdpezn Ay Tsfx Apwsgf Feed Rate: 12 m/min (max feed rate in all axes) Number of Tool Stations: 6 to 12 tool stations Maximum Tool Diameter: 32 mm (in fully populated tool turret) Maximum Tool Length: 100 mm Positioning Accuracy (X, Y, Z): ±0.005 mm Repeatability (X, Y, Z): ±0.002 mm Spindle Runout: < 0.003 mm

Condition: used, machine/vehicle number: 008647, X axis working area: 3650 mm Y axis working area: 1500 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Fgedpfx Apozdquwjwof Number of controlled axes: 3 axes Total number of drilling spindles: 26 Total number of tool changer positions: 12

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Fodpfx Aowcfgbjpwjgf Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Fgjdpfjrtrlzjx Apwjf Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs Fsdpozrnkrofx Apwsgf

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm Fgodpfx Apszgw Tfewsf tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min Fgodpfxoydqpio Apwjf voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 1971, swing diameter 0520 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Fgjdpfx Aoy Nd S Aopwsf Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 Fgedpfx Asvy Ig Topwjf rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe VDF BOEHRINGER - VDF 315 Cm / DL 2000

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Fodpjztctqofx Apwogf Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PUMA 480, DOOSAN PUMA 480 CNC LATHE 900 MM SWING 650 MAX TURNING 1000 MAX LENGTH TOOL SETTER 600 MM HYD CHUCK BORE 181 MM - TO CONFIRM Fsdpoztpy Dsfx Apwogf YEAR 2011 TAILSTOCK COOLANT SWARF CONVEYOR

Condition: used, Year of construction: 2005, control Haas Automatic Fodpfx Ajztfvzjpwsgf 3 Backen x-travel 850 mm changer 12 fach serial number 70422 total power requirement 22 kW weight of the machine ca. 4,5 t

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 Fjdpfxjyxr Hge Apwsgf tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector

Condition: good (used), Year of construction: 2010, 400mm max machining diameter, 640mm max cutting length, 685mm swing, 12 Station Turret, Fanuc 32i Control, spindle motor power 25kW, 77mm diameter bar cap, 3 jaw chuck, swarf conveyor, tool presetter, coolant, Fjdpfxozqr N Ao Apwegf

Condition: good (used), Year of construction: 2013, 480mm swing over bed, Fjdpfx Apszqr Hnswegf 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Control: Siemens 840D Spindle bore: 65 mm Speed: 4,000 rpm Tool holder: VDI 30 Main and counter spindle with C axis TOOL CARRIER I (XZ) Technology: Cross slide (3x) Travel: X= 70, Z= 115 mm Tool Carrier II (X/Z) Turret with 7 stations and subspindle All stations driven (3,000 rpm) Travel: X= 160, Z= 450 mm Fgjdpfx Asy Rr U Uepwef Tool Carrier III Turret with 8 stations Travel: X= 150, Z= 200 mm Tool Carrier IV (rear side) Turret with 8 stations 3 tool holders for rear side EQUIPMENT - Chip conveyor - Bar feeder IEMCA MASTER 80/33 HF

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Fsdpsztc U Uefx Apwsgf Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. Fgodpfxezr D Tco Apwjf It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Year of construction: 2016, condition: ready for operation (used), CMZ brand CNC lathe, model TA 20 Y, manufactured in 2016. Fgedpfx Aszrwf Ejpwsf

Condition: good (used), Year of construction: 1998, Weiler E30 CNC lathe Dimensions, width: 1200 mm Dimensions, depth: 1800 mm Dimensions, height: 1700 mm Machine weight: 1300 kg Spindle bore: 42 mm Workpiece depth over the bed: 330 mm Multifix holder B installed Fixed steady rest (optional), clamping range: 15-100 mm Traveling steady rest (optional), clamping range: 10-85 mm Collets from 3-28 mm (in 0.5 mm increments) Tailstock with MK3 chuck Drive power 100% / 60% duty cycle: 9/11 kW Max. torque on the spindle: 180 Nm Total speed range: 1-4500 min⁻¹ Feed drive: Three-phase feed drives Feed range, longitudinal: 0-20 mm/rev Fgsdezr Uc Uepfx Apwef Cutting speed, longitudinal/facing: 10/7.5/5/3.5 m/min Tailstock quill diameter: 50 mm Quill travel: 110 mm Internal taper of the quill: MK 3 Swinging diameter over the cross slide: 160 mm Bed width: 240 mm Travel of the cross slide: 180 mm Length of the bed slide guide: 395 mm Cross-section of the cutting tool (height/width): 20 x 20 mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing: 70 mm Internal taper of the main spindle: MK 5 Workpiece: Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: 0.125 - 28 mm DP thread range: 1-224 G/" Number of threads max.: 50