Used Fume Cupboard for sale (483)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Ibjdpfx Apozlktps Doc Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 4000 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 54.9 Equipped with: No. 3 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes) Iedpfxogz Svgs Ap Dsbc

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Options/additional cost for: Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us. Ibedpjfn Ndcefx Ap Dec

Condition: good (used), High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm Ibjdpsff Aq Asfx Ap Dec -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX Ijdpfjia Taqex Ap Djbc - Complete technical documentation - CE documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: good (used), Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block Ibedjpm Th Eepfx Ap Dec -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 Isdpfx Apopz Sfhe Dsbc -Motor: Siemens 0.9/3 kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg

Condition: used, Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, extraction fan, fan, pressure fan, vacuum fan, ventilation fan, fan, radial fan -Manufacturer: ebm, radial fan extraction fan -Type: 2CF2062-OEA -Engine power: 0.18 kW / 2740 rpm -Connection input: Ø 62 mm -Connection output: Ø 63 mm -Fan wheel: Ø 240 x 30 mm Ibodpfx Ast E D Hijp Dec -Protection class: IP 54 -Dimensions: 340/300/H355mm -Weight: 8.8 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: MA-VIB, fan blower radial fan type OS.120.201.4 -Engine power: kW Ijdpfeuqf Uljx Ap Dobc -Speed: 2950 rpm -Volume output: /min -Fan wheel: Ø 120 x 30 mm -Connection input: Ø 135 mm -Connection output: 80 x 55 mm -Dimensions: 210/190/H200 mm -Weight: 3.1 kg

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower, radial fan -Engine: Katt type 806 419 0.25 kW -Speed: 2840 rpm -Volume output: /min -Fan wheel: Ø 175 x 130 mm -Inlet connection: Ø 125 mm Ibjdpeuqq Rfsfx Ap Djc -Air duct connection: Pipe connection 135 x 60 mm -Dimensions: 360/290/H265 mm -Weight: 9.3 kg

Condition: good (used), High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial blower, high pressure blower, high pressure fan -Manufacturer: Combimac, high pressure blower type 54A641- /BJ1 -Drive motor: rotor 0.75 kW -Speed: 2840 rpm -Volume output: 2.1 m³/min -technical data: see photo type plate Ibjdpoun Du Sjfx Ap Doc -Connection input: Ø 120 mm -Connection output: Ø 100 mm -Fan wheel: Ø 540 mm -Dimensions: 760/340/H840mm -Weight: 88 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2830 rpm -technical data: see photo type plate -Fan wheel: Ø 200 x 70 mm -Connection input: Ø 68 mm -Connection output: Ø 50 mm -Dimensions: 295/250/H320mm -Weight: 9.1 kg Ibsdsun Dvpjpfx Ap Djc

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Meidinger, blower radial fan with support frame -Engine power: 0.55 kW -Speed: 2850 rpm -Volume output: 42 m³/min -Protection class: IP 44 -Fan wheel: Ø 300 x 110 mm Ibedpfjun Dv Nsx Ap Dsc -Connection input: Ø 190 mm -Connection output: Ø 190 mm -Dimensions: 630/530/H560mm -Weight: 48 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos Iedpfx Aeryalisp Dsbc -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: new, Year of construction: 2026, Professional CO2 laser with a 1600mm x 1000mm work table and a tube with a rated power of 150W reaching 168W at peak! The standard equipment includes a CW5200 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Working Area: The 1600x1000mm table allows you to work with large and complex projects. Laser Power: Rated power of 150W, reaching 168W at peak! This is a guarantee of fast and precise operation. Cooling and Efficiency: Equipped with a CW5200 liquid cooler ensuring optimal working conditions and a compressor for blowing the lens and material. Modern Technologies: Ruida RDC6445S controller and support for many graphic formats, WiFi and USB interface, and color separation. High Precision and Repeatability: Thanks to precise stepper motors and linear guides from LEADSHINE and the ability to work in 2500DPI resolution. Versatility: Excellent effects in engraving and cutting materials such as acrylic, wood, textiles, leather, plastics and much more! Exceptional Standard Equipment: PURI 150-168W laser tube, smoke extraction, steel honeycomb table, and blower compressor. Advanced functions, high quality of workmanship and a wide range of possibilities make our CO2 1610G laser not only a work tool, but also an investment in the future of your business! Model: 1610G Working area: 1600x1000mm (Y-axis pass-through table) Rated laser power: 150W Peak laser power: 168W (!) Laser tube type/type: Glass CO2 laser tube Cooling type: Closed-loop water cooling - CW5200 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Ibedotvmnqjpfx Ap Dec Max. Cutting thickness: up to 25mm depending on the material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445S - a module with advanced functions providing advanced control over the parameters and processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 150-168W laser tube Fume extraction and piping CW5200 cooler Table knife Rigid, stable steel honeycomb table Blowing compressor

Condition: used, Side channel compressor, side channel blower, vacuum pump, blower, dust extraction fan, exhaust gas extraction, welding fume extraction, suction, fan, pressure blower, vacuum blower, low pressure fan -Pressure blower: High pressure blower with transport rollers -Motor: elsto Type:ES 160M2A-40 H -Motor power: 11 kW / 2900 rpm -Volume flow: m³/min -Connection input: Ø 185 mm -Connection output: Ø 160 mm -Base plate: 800 x 250 mm -Dimensions total: 1260/920/H1170 mm -Weight: 161 kg with pallet Ibjdpfx Aorh Nitop Djc

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar Ibodpfswqdycox Ap Dsc - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. Ijdpfjzmqa Eox Ap Debc • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm Iedoy Tt Ihjpfx Ap Dsbc -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm -Dimensions: 815/590/H400 mm -Weight: 33 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD Iedpfxjy Tt Tws Ap Djbc -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. Ibedezu Nm Hspfx Ap Dsc * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, The machine is in very good condition and has been regularly serviced by qualified service technicians! TECHNICAL DETAILS Laser power: 2,000 W Sheet metal thickness max: 16 mm Sheet metal thickness, steel max: 16 mm Ibsdpfx Apjzlc Sqj Dec Sheet metal thickness, stainless steel max: 8 mm Sheet metal thickness, aluminum max: 6 mm Table length: 3,000 mm Table width: 1,500 mm EQUIPMENT Cooling unit Emergency stop switch Fume extraction Safety light curtain Dust extraction Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,500 h, laser power: 6,000 W, travel distance X-axis: 4,064 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details. • Height adjustment: 980 mm • Table load: 1250 kg • Laser Cutting Head: Patented "Dry Cooling" focusing head with auto-focus 210 mm lens and capacitance anti-collision profiling • Main electronic connection: 400 V / 50 Hz • Power consumption: 27 kWh • Year of Order Confirmation: 2017 • Machine Type: Fiber Laser Cutting Machine • Application Type: Sheet Metal Cutting • Maximum Axis Acceleration (X / Y): 1.5 g / 2.0 g • Material Cutting Capacity (Maximum Thicknesses): Mild Steel 25 mm, Stainless Steel 20 mm, Aluminum 20 mm, Copper 8 mm, Brass 8 mm • MTW4020.V5 Five-position storing module (Max capacity 3000 kg per tray) • Motorized Scissor Table (Max capacity 3000 kg) • Connection for automatic sheet loading and unloading (Unloading comb matrix) • Extra bay lengthened main automation structure • LTS4020 Tray supporting station with leafing magnets • MCL40 Cartesian Manipulator / Stacker with dual rotating gripping devices (Max part capacity: 65 kg single / 130 kg dual) • MCL Magnet kit (10 magnets total for picking up perforated or small parts) • TCV4020 Stacking Scissor Table (Max capacity 5000 kg, 1000 mm stroke) • CCVT40 Motorized Carriage (Short side mobile, max capacity 5000 kg) • PPC4020 Gantry Mobile Carriage & PMC4020 short-side mobile carriage • APC2 Adaptive Process Control (Double-channel sensor reading piercing spectrum and cutting losses) Ibedpfezk D Hmox Ap Djc • AVS Artificial Vision System (HD camera for parts referenced program generation from dxf/dwg) • ANC Automatic Nozzle Change (8-position nozzle carrier with integrated cleaning brush) • GF Interchangeable grids with mild steel slats & CRS Scrap collection bins • ASF Fume Extraction unit with high-efficiency filtering sleeves, pneumatic cleaning, and integrated spark trap

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Model: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory bricks (chamotte) - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as premium on-site support. Please also take note of our attractive leasing/financing offers. New machine, delivery time approx. 6-8 weeks Iodpfjyacwkex Ap Debc We are happy to demonstrate the machine at our facility. Travel range: approx. 1000 x 2000 mm Table size: approx. 2070 x 1070 mm (i.e. the machine accommodates a small-format sheet) Sliding cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start working Laser source from Max Photonics (G5/German version) with 3000 watts output Comprehensive electronic and mechanical collision protection systems for the cutting head Large laser protection window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate operation LED work area lighting 200mm duct connection for fume extraction incl. extraction fan Leasing or financing available through our financing partner Require different power or table size? No problem, we have several machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery/advice/sales only in Germany/Austria/Switzerland Machine dimensions approx.: Width: 3.6m, Height: 2.1m, Depth: 3.3m Weight: approx. 2.5 tons

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW Ibodpoy Uxmxofx Ap Djc -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg