Used Gantry Milling Machine for sale (65,386)

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine - Vertical Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Fpodezq Hlfepfx Am Ejp Technical Data: - X-travel: 300 mm - Y-travel: 300 mm - Z-travel: 400 mm - Speed range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 1989, condition: used, Equipment: radial milling head model FR for machining extruder screws, climb milling device, automatic chip conveyor system, coolant system, separate lubrication systems for gearbox and guideways, chip and splash guards, safety fence, sliding door, tailstock with full quill, bushing support rests, steady rest, 3-jaw chuck F400. Max. workpiece diameter: 600mm, milling length: 3000mm, thread pitch: 1-9999mm, workpiece diameter over carriage: 160-320mm, spindle bore: 120mm, number of teeth: 4-100, tool holder: ISO 50, longitudinal feed rates, infinitely variable: 1-5000mm/min, rapid traverse: 750-5000mm/min, max. workpiece weight: 2t, spindle drive motor: 20kW, main drive: 20kW, total connected power: 50kW, control system: Siemens Sinumerik 3M (GA4)/S2 with handwheel. On-site inspection is possible. Fodpfx Ams Ai Hd Ro Eopp

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Fodpou T Ty Hjfx Am Eopp Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: good (used), functionality: fully functional, Internal article number: 26103 Universal milling machine Deckel FP1 + 3-axis digital display K+C + New collet set + Coolant pump + Complies with occupational safety regulations Fodj Aif N Iopfx Am Ejpp The machine comes from a training workshop and is in good condition, both technically and visually. The machine is fully functional and can be inspected while powered on, by appointment, in our heated warehouse covering over 500 m².

Condition: excellent (used), x-travel 16500 mm Fpodpfxo Aiv Hnj Am Esp y-travel 2000 mm z-travel 1200 mm Control HEIDENHAIN TNC-640 spindle speed: 4000 U/min. rapid traverse 25 m/min tool change unit 60 coolant IKZ dividing each Kopfachse 2,5° tool taper ISO SK-50 total power requirement 68 kVA weight of the machine ca. 51 t

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Fsdpfjwrdu Asx Am Eepp Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, Year of construction: 2020, Portal milling machine Vision Wide VF4000, year of manufacture 2020 2-axis milling head (1-degree C-axis and 1-degree B-axis) with position determination SK50 encoder VTEC VF4000 Dimensions X-axis 4200 Y-axis 2300 Z-axis 1020 Tool magazine 40 tools Control system Siemens 840D SL Fpedpfx Amjzxxgdj Esp

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain 355 total power requirement 4 kW Fpjdspxrknjpfx Am Esp weight of the machine ca. 2,4 t

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) Fpjdoy N Du Depfx Am Ejp - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m Fedju Ndf Ispfx Am Eepp clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, total height: 1,900 mm, total width: 160 mm, total length: 2,000 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Documentation available: Yes - Drive system: Conventional - Power [kW]: 5.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 Fpeds Ahki Sepfx Am Esp - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 490 - B-axis rotation [°]: 360 - C-axis rotation [°]: 270 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO40 - Main spindle power [kW]: 3 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1510 - Options: Chip collection tray, External cooling, Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2000mm x 165mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2819-1160, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 300 mm Travel range Y-axis: 300 mm Travel range Z-axis: 400 mm Clamping area: 390 × 620 mm Fsdpfx Ao Ah Slzem Ejpp Spindle speed: 40–2,500 rpm Spindle taper: SK 40 Quill travel: 60 mm Rapid traverse: 4.0 m/min EQUIPMENT Chip collection tray

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Fpsdpfottamkjx Am Esp Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel • Operating manual - Newly refurbished milling head, partially overhauled with new gears, seals and bearings - Oil dispenser for central lubrication renewed Operating hours: 10,032 Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2015, Description to follow! Fpsde Afzr Tjpfx Am Ejp

Condition: good (used), x-travel 300 mm y-travel 160 mm z-travel 360 mm Total power requirement 1 kW Machine weight approx. 0.8 t Fpjdpfx Aow U Shhem Ejp various engraving kits

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, rotational speed (max.): 18,000 rpm, table load: 500 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Fsdpfx Amjz E Dl Ne Eepp Can be inspected while powered on Control system: Heidenhain 426m Manuals and documentation available If you have any questions or require further information, please feel free to send us a message or call us. No direct sales to countries outside the EU.

Condition: reconditioned (used), Year of construction: 1976,

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control, manufactured in 2008. Excellent CONDITION, CE-compliant!! Technical data: >> Year of manufacture: 2008, Machine No. 346199 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate: continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke, vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1700 kg >> Space requirement approx.: 2.3 x 2 x 2 m Fpedpfxo Ah Tvbe Am Eop >> Drive power: 12 kVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was used only sparingly for training purposes. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy, by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW Fodpfe Ahzi Njx Am Eepp weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; -Pneumatic tool clamping; -Coolant system; -Work light; -Chip tray; -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel - Operator platform Fsdpfxjzix Rws Am Eepp - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm - Splash guard enclosure - CE marking

Condition: used, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, Vertical Milling Machine Manufacturer: DECKEL Model: FP 4 NC Control: Heidenhain TNC 355 Technical specifications: - X-travel: 560 mm - Y-travel: 500 mm - Z-travel: 410 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Fpedpfxozq Hllj Am Ejp Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Total power consumption: 65 kVA Fpedpfxo Af Uycs Am Eop Machine weight: 16.000 kg Equipment: Automatic, infinitely variable 2-axis universal milling head NC rotary table (dividing head) with tailstock 30-station tool changer Chip conveyor Coolant system with internal coolant supply (ICS) Electronic handwheel 3D touch probe Machine enclosure Operating manual Machine without clamping units, tools and holder.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h Fjdpfx Amjzufi Rj Ejpp X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: used, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, Vertical Milling Machine Fsdpfxszq Hk Uo Am Ejpp Manufacturer: DECKEL Model: FP 4 NC Control System: Dialog 11 Technical specifications: - X-axis travel: 560 mm - Y-axis travel: 500 mm - Z-axis travel: 410 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 1961, condition: used, Offered is a universal milling machine with a vertical milling head. T-slotted worktable, handwheels for axis adjustment, coolant hose, conventional operation via handwheels, selector levers and electrical controls. Inspection possible by arrangement. Fedj Aiu Sfspfx Am Ejpp