Used Garden Construction for sale (19,929)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 4,000 h, Articulated dump truck ASTRA AD125C, year 2007, 4000 hours, 6x6 Itedex Iwadspfx Ahyeb

Condition: like new (used), functionality: fully functional, empty load weight: 9,200 kg, maximum load weight: 28,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2020, loading space length: 11,600 mm, loading space width: 2,550 mm, loading space height: 850 mm, total length: 11,600 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 80 %, ground clearance: 850 mm, color: dark red, Year of construction: 2020, Equipment: ABS, tail-lift, Bertoja lowbed semi-trailer, 11.70m used, 3 axles with first axle liftable and third axle steering, air suspension, EBS, ride height control valve, 5-ton lashing rings on the sides and deck, wide double electro-hydraulic ramps with wood and grating surface, rear stabilizer legs, total length 11.70m, 8-meter loading platform, year 2020, like new, MOT valid until 30.04.2026 – Dealer INTERDRIVE SRL – Parma Iodpox Nmwhofx Ahyjtb

Condition: new, Year of construction: 2023, total length: 3,458 mm, load capacity: 1,270 kg, Construction machinery Manitou MLA 3-25H Iedjxd E I Ejpfx Ahyotb Drive Diesel Year built 2023 Lifting weight (kg) 1,270

Condition: ready for operation (used), functionality: fully functional, empty load weight: 7,400 kg, maximum load weight: 29,400 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 09/1997, loading space length: 1,360 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 70 %, ground clearance: 850 mm, color: orange, Year of construction: 1997, Equipment: ABS, tail-lift, Used De Angelis low-loader semi-trailer with winch, 3 axles (3rd steering), air suspension, ABS, gooseneck chassis with twin full-width electro-hydraulic rear ramps, hydraulic winch under the neck (max. 24 tons), lowered deck section 9.95 m long x 85 cm from the ground, aluminum side boards 70 cm high, opening and removable, year 1997, inspected until 31/12/2026 – DEALER INTERDRIVE SRL – PARMA Ijdpfx Ahjx H S Awjyjtb

Condition: good (used), functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 48,000 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 06/2017, loading space height: 850 mm, total length: 13,600 mm, total width: 2,550 mm, total height: 850 mm, suspension: air, tire size: 245.70 R 17.5, tire condition: 74 %, color: green, Year of construction: 2017, Equipment: ABS, tail-lift, Used De Angelis extendable heavy-duty low loader semi-trailer, 4 axles with first axle liftable and third and fourth axles steering, chassis extendable by an additional 3.70 m, air suspension, EBS, RUD lashing rings on the platform rated at 7 t, single electro-hydraulic ramps, side extension outriggers, rear and front stabilizer legs, year 2017, stake pockets, steel and wood floor with closed low-bed deck of 9.40 m + 3.70 m extension, deck height 85 cm from the ground, aluminium sideboards on gooseneck, gross load capacity up to 70 t, tare weight 16 t, roadworthiness inspected until 30.04.2026 – DEALER INTERDRIVE SRL – PARMA Itjdpfxsx H Swuj Ahysb

Condition: excellent (used), Year of construction: 2017, PERII production pallets, dimensions 1200x1100x50 mm, quantity 4,000 pcs, price given per piece, condition B – good. Itedpsx Hdpiefx Ahyob

Condition: like new (used), Year of construction: 2019, total height: 750 mm, total width: 670 mm, total length: 360 mm, 3 pcs. WALTHER distribution cabinets Isdoxrr Smspfx Ahyetb with approx. 15 m connection cable 5 x 16 mm² Details: According to IEC61439-4 Enclosure (H06) made of electrolytically galvanized steel sheet with heavy-metal-free plastic coating Color: RAL 2004 - pure orange with single door, spring-loaded latch for padlock, and recessed handle with crane lugs and side carry handles Including hot-dip galvanized underframe with lugs for ground stakes Protection class: IP 44 Approx. dimensions: 739 x 669 x 360 mm (H-W-D) Underframe height approx. 230 mm Connection: 1 circuit breaker 3P 63A with thermal-magnetic trip unit with terminal clamps 10-50 mm² Output / Protection: 1 RCD circuit breaker 4P 63A/30mA -B- 1 CEE panel socket 32A 5P 400V 6h with miniature circuit breaker (MCB) 3P 32A -C- 2 CEE panel sockets 16A 5P 400V 6h each with individual miniature circuit breaker (MCB) 3P 16A -C- 1 RCD circuit breaker 4P 40A/30mA -A- 6 safety sockets 16A 2P 230V each with individual miniature circuit breaker (MCB) 1P 16A -C- Sale is ex works, against advance payment Price is per single distribution cabinet

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ Itodpex D Df Nefx Ahyjb 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph Double Skinned Insulation • 5mm first skins235jr main tank body • 100 mm stonewool insulation between skins • 3mm top skin s235jr • 500 ton total capacity • Complete electrical heating • DN80 outlet steel pipe and valve • DN80 inlet pipe and valves • Hydrostatic Level Gauges • 3x45kw Heating Coils • 3x45kw Gamak/Yılmaz Gerbox/Motor Stirrer • 110 Tons Weight • 2xPT100 Tempereture sensor • Capacitive Level sensor • Power panel and control panel on chassis Ijdpfx Ahex D Dbkjyotb • Plug-in Electrical Installation • Turn-key ready to use

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. Itedpex D A R Djfx Ahysb • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts. Iodjx D A Rkopfx Ahyotb

Condition: used, A used stacking bin made of painted steel with dimensions of 975x610x510 mm (lxwxh) and a capacity of 163 liters is a versatile and robust storage tool. With its sturdy walls made of flat steel plates, this bin can carry heavy loads without deformation. The storage bin stands on four legs with an insertion height of 100 mm. This Itodpfjw Sw D Aox Ahyjb

Condition: used, A used hot-dip galvanized steel stacking bin, made according to Euronorm dimensions 1000x800 mm, is a robust and durable solution for storage and transport. Itedpfx Aew Sw Emshyeb The hot-dip galvanization provides excellent protection against corrosion, which extends the life of the bin, even in harsh industrial environments. These Euronorm dimensions

Condition: used, Used green lacquered steel stacking bin 1200x850x670mm. Itodpfx Aow Swy Rjhyeb The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. The stacking bin also has four upright corners with lifting eyes. This makes the bin easy to stack. Open long front for easy access to goods. L: 1200, W: 850,

Condition: used, Used steel stacking bin, measuring 1240x840x540 mm. The Euronorm size of 1200x800 ensures that this bin fits into standard logistics systems. Two dividers organise the bin internally, allowing different items to be stored separately. Isdpfx Ahew Swzzoyotb Moreover, the stackability of this bin is a space saver, allowing easy stacking of several

Condition: used, Lot offer of 5 used painted steel stacking bin. The used warehouse bins stand on four sturdy legs, making them easy to pick up with a forklift or pallet truck. Also, the stacking bins have four upright corners with lifting eyes (not certified for lifting). This makes the bin easy to stack. Ijdpfx Ahjw Swxmoyjtb L: 1230, W: 830, H: 600 (mm).

Condition: used, From € 87,55 now for € 65,66. Now with a 25% discount. Used gray painted steel stacking bin (1200 x 800 mm). The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. Iodpfew Swx Hox Ahyotb The stacking bin is also equipped with four raised corners with lifting eyes (not certified for lifting). This makes the

Condition: used, From € 54,95 now for € 41,21. Now with a 25% discount. Isdew Swyqepfx Ahyetb A used steel stacking bin on legs with 4 closed and profiled walls is a robust and versatile storage container. This type of stacking bin is often used for storing and transporting parts, materials, tools and other items in various industries, such as manufacturing, logistics and

Condition: used, Used gray painted steel stacking bin (1200 x 800 mm). The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. The stacking bin is also equipped with four raised corners with lifting eyes (not certified for lifting). This makes the bin easy to stack or lift. Iodpfjw Swx Tex Ahyjtb Notice!

Condition: used, Used stacking bin steel - 1230x830x425(lxwxh). With ample capacity for storing your goods in the warehouse or elsewhere. Easy to transport by forklift or pallet truck. The stacking bin also has four raised corners with lifting eyes (not certified for lifting). More stability due to raised corners when stacking several Itjdpfx Ahsw Swydsyeb

Condition: used, From € 60,00 now for € 60,00. Now with a 25% discount. Used green lacquered steel stacking bin 1000x850x670mm. Itjdpfx Ahow Swy Dsyeb The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. The stacking bin also has four raised corners with lifting eyes. This makes the bin easy to stack. Open long front

Condition: used, Used and robust steel stacking bin, also known as construction storage pallet, is specially designed for safe and orderly storage of heavy and bulky materials on construction sites, in workshops or industrial environments. Itodpfew A N S Iox Ahyjb With a generous size of 1200 x 840 x 950 mm, this bin offers a sturdy and spacious storage solution that can take a

Condition: used, L: 1470, W: 1115, H: 1080 (mm). Product: Mesh Stillages. Type: Fixed construction. Version: With door. Material: steel. Walls: mesh. Floor: wood. Top: not stackable. Euronorm (mm): none. Itsdpfsw A N Nmex Ahysb Colour: grey. Surface treatment: galvanized. Internal length (mm): 1370. Internal width (mm): 1040.

Condition: used, Used painted steel stacking bin. The storage bin stands on four legs, making it easy to pick up with a forklift or pallet truck. Itodpswpr Ewjfx Ahyob The stacking bin also has four upright corners with lifting eyes (not certified for lifting). This makes the bin easy to stack. L: 1060, W: 855, H: 535 (mm). Product: Stacking box steel.

Condition: used, Used painted steel stacking bin. The storage bin stands on four sturdy legs, making it easy to pick up with a forklift. The stacking bin also has four upright corners with lifting eyes (not certified for lifting). This makes the bin easy to stack. Attention! Not suitable for hand pallet trucks. Isdpswpr D Hofx Ahyotb L: 1040, W: 840,