Used Garden Construction for sale (19,824)

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Ijdpfxsuy Thme Ahyetb Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: new, REMS Orkan 1360 electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support the exchange of air in damp, musty cellars, to support the drying of e.g. concrete, masonry, plaster, screed and for filling e.g. inflatables, hot air balloons. Capacitor motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1360m³/h. In sturdy plastic housing. In cardboard box. Air volume: 1360 m³/h Itsdpfxeuyg Utj Ahyjb Power: 145 W

Condition: new, REMS Orkan 2050. electric construction fan for commercial use. For ventilation of rooms, intermediate spaces, shafts, cavities and for ventilation and wind cooling of machines, marquees, event halls. To support air exchange in damp, musty cellars. Especially for accelerating the drying of e.g. concrete, masonry, plaster, screed. Condenser motor 230V, 50Hz, 145W, for continuous operation. Very quiet operation. Air volume 1740/2050m³/h. In sturdy plastic housing. In cardboard box. Air volume: 2050 m³/g Motor: 230 V, 50 Hz, 145 W Itodpjtty Nnofx Ahyob

Year of construction: 2015, condition: used, General information Field of application: Freight transport Drivetrain Make of engine: Honda Functional Lifting capacity: 2 kg History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 1800 cm Remote control: Cable Latest inspection: 2025-11-03 Iedpsx N Tngefx Ahyetb Production country: DE Additional information Please contact Michael Overmeer for more information Böcker Junior HD18 Furniture lift construction year 2015 from the first owner, like new! Lift weights 750 kg so you can drive it with your normal driver license (Categorie B). Options: Honda petrol engine, toolbox, mechanical remote control, retractable drawbar, aluminium basket. Last inspection and major maintenance service at Böcker 11-2025. Changes and writing and typing errors reserved.

Year of construction: 2006, condition: used, Year of manufacture: 2006 Model year: 2006 Empty weight: 157 kg Carrying capacity: 295 kg GVW: 452 kg Working height: 732 cm General condition: good Technical condition: good Visual appearance: good Manufacturer: Genie Type: SLC-24 Year of manufacturing: 2006 Weight: 157 KG Product number: 22054 Lifting height: 7,32 m Transport height: 2,18 m Lifting capacity: 295 KG Machine is technically in good condition. Documents incl. CE. Price: € 1.450,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Itedpfox Uxiysx Ahyeb Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Year of construction: 2009, condition: used, Year of manufacture: 2009 Empty weight: 157 kg Carrying capacity: 295 kg GVW: 452 kg Working height: 732 cm General condition: good Isdpfxjx Uxitj Ahyjtb Technical condition: good Visual appearance: good Manufacturer: Genie Type: SLC-24 Year of manufacturing: 2009 Weight: 157 KG Product number: 22058 Lifting height: 7,32 m Transport height: 2,18 m Lifting capacity: 295 KG Machine is technically in good condition. Documents incl. CE. Price: € 1.750,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Year of construction: 2013, condition: used, Year of manufacture: 2013 Empty weight: 157 kg Carrying capacity: 295 kg GVW: 452 kg Working height: 732 cm General condition: good Technical condition: good Visual appearance: good Manufacturer: Genie Type: SLC-24 Year of manufacturing: 2013 Weight: 157 KG Product number: 22059 Lifting height: 7,32 m Transport height: 2,18 m Lifting capacity: 295 KG Iodpfx Ahjx Uximeyjtb Machine is technically in good condition. Documents incl. CE. Price: € 1.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar Itodpfou Icyhjx Ahysb total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Year of construction: 2020, condition: used, General information Field of application: Freight transport Drivetrain Make of engine: Honda Functional Lifting capacity: 4 kg History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 2600 cm Remote control: Cable Production country: DE Additional information Please contact Michael Overmeer for more information Itsdpfx Ahox N Hy Aeyjb Böcker Avario HD26 Furniture Lift construction year 2020 with only 85 hours from the first owner. Lift is like new (has always been inside when not in use) and has among other things a XXL basket, remote control, hydraulic wheel drive. Changes and writing and typing errors reserved.

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 Isdpfx Aou D Amgohyetb - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Iedpfjxdttpex Ahyjtb Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, Mobile warehouse Ijdpexzrtpofx Ahyetb customized quotation

Condition: new, functionality: fully functional, machine/vehicle number: 12623007, empty load weight: 730 kg, maximum load weight: 1,270 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,280 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, suspension: other, Year of construction: 2026, Loading dimensions approx. 1670 mm x 3280 mm x 2300 mm External dimensions approx. 2130 mm x 4475 mm x 2705 mm Permissible total weight: 2000 kg Payload: approx. 1270 kg (payload may vary depending on additional equipment) Manufacturer: Cheval Liberté Special features - Aluminium horse trailer GOLD Origins (2 horses) - Polyester roof and front section (aerodynamic) - Rear ramp in aluminium / pivoting and swivelling with rubber mat - Lockable tack room - Roll-up tarpaulin (air and light permeable) - Shock absorbers installed incl. 100 km/h approval - Lockable side door (large version) - Interior lighting with switch - Vehicle documents included Further equipment - Aluminium floor with 8 mm rubber mat (bonded and sealed) - Sliding windows left and right (tinted) - Partition bars front and rear (split / adjustable) - Centre partition (removable) - Emergency release - Kick protection and side padding Chassis - Knott | Rubber suspension axle | V-drawbar | Automatic heavy-duty jockey wheel | Reverse drive automatic Ijdpfx Aoi R Hvtohystb Electrics - 12 Volt | 13-pin plug | Rear fog lamp If you wish to purchase this trailer or have further questions about trailers, please use our internal horse trailer reference "No. 12613027".

Condition: new, functionality: fully functional, Year of construction: 2026, Technical data Drive type: Gasoline Output power: 3.7 kW Max. Cutting depth: 125 mm Max. Cutting disk diameter: 350 mm Motor Output power: 3.7 kW Max. recommended speed: 9300 rpm Speed at max. power: 9000 rpm Cylinder: 1 Number of strokes: 2-stroke engine Exhaust emissions (CO2 EU V): 711 g/kWh Drive type: Petrol Cutting equipment Max. Cutting depth: 125 mm Max. Cutting wheel diameter: 350 mm Itjdpfx Aott Ad Tohyeb Mounting diameter: 25.4/20 mm Max. Cutting wheel thickness: 5 mm Max. speed: 90 m/s Coolant: Wet

Condition: new, overall weight: 1,300 kg, empty load weight: 1,140 kg, maximum load weight: 160 kg, loading space length: 4,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165R13C, Car trailer as a construction trailer for 8 people with toilet and storage room. The insulated recreation trailer is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. A heater provides support in very cold weather. Itedpfjrx Sn Tsx Ahysb The use of a crew trailer is possible on almost any construction site. As a normal car trailer, it can be driven to the construction site by a simple car. These vehicles are also operated as Burö trailers. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, toilet room with chemical toilet and sink, storage room with shelf, stairs and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drainage via a sewer, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: new, * IMMEDIATELY AVAILABLE * Including continuous ramp 150cm / Low loading platform / Lashing eyes recessed in floor Technical Data: • Make: Martz • Model: BAU-3 350/2 S • Vehicle type: Construction Machinery Trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 350 x 182 x 25 cm • External dimensions (LxWxH): 552 x 241 x 182 cm • Loading height (floor): 34 cm • Gross vehicle weight: 2,700 kg • Unladen weight: 630 kg • Payload: 2,070 kg • Chassis: Low loader (wheels beside platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Continuous phenolic plywood floor, jointless, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp pivoted on shaft • Strong eccentric catches • Stake pockets at all four corners for tarpaulin frames, mesh sides, side wall extensions, or high front wall • Rugged support legs on the loading ramp • Assisted ramp lift • Very low chassis for minimal approach angle • With excavator bucket rest • 8x recessed side lashing rings in frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reversing automatic system • KNOTT overrun coupling and parking brake • Very sturdy reinforced bolted V-drawbar Itjdpfx Ahex Tixijyeb • 13-pin plug • Reversing lamp • Large dimension safety lighting • Lane marker lights at rear • Integrated rear fog lamp • Rear frame lighting recessed • Central automatic jockey wheel Optional accessories – enquire if interested: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing lamp • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or temporary license plates (Germany) can be provided - Export plates incl. customs clearance available All descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been your professional dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted

Condition: new, * IMMEDIATELY AVAILABLE * Including rack for transporting scaffolding / XXL storage box Technical data: • Brand: Martz • Model: SCAFF 480 Itedpfx Ajx Tixpohysb • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/roadworthiness: 2 years from first registration • Internal dimensions (LxWxH): 480 x 250 x 0 cm • External dimensions (LxWxH): 598 x 255 x 249 cm • Loading height (floor): 55 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 816 kg • Payload: 2,684 kg • Chassis: Low-loader (wheels alongside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Plastic mudguards with checker plate reinforcement • Convenient loading rack, ideal for transporting scaffolding parts • Large accessory box for secure storage of small scaffolding components • Very robust, welded steel frame • Frame fully hot-dip galvanized by immersion bath • Maintenance-free KNOTT rubber suspension axles • Reverse automatic device • KNOTT overrunning brake and parking brake • Very robust, bolted and reinforced tubular drawbar • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Rear lane marker lights • Integrated rear fog lamp • Rear frame lighting recessed • Automatic jockey wheel Optional accessories (available on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Additional storage boxes • Reversing spotlight • Lashing straps • And much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance, or transit plates (for Germany) can be provided. - Export licence plates including customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers available from stock! We have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, Year of construction: 2022, NEW ❗❗❗ office container/residential container for sale/ In stock ❗❗❗ External dimensions: 240x 400x 240H Description of standard version: • Insulation roof/wall PU- 40 mm • Sandwich panels - (Standard RAL 9002) • Frame color - (standard RAL9002) • Floor - laminate • 1x 90x200 outer door Itsdpfx Ahohy Tb Nsyeb • 2x windows (turn/tilt & fix) • LED lighting (inside/outside) • Electrical box with circuit breaker • 32 A power connection including sockets BS Containers have a high quality standard and are ISO 9001-2015 certified. The materials selected for the containers correspond to the specified EU standards. Our containers are particularly characterized by: High-quality materials Stable construction Premium insulation individual design Versatile uses The price is a net price. For companies with EU VAT ID no. no VAT will be charged (price equals take-away price).

Condition: new, Year of construction: 2023, Office container 600cm x 240cm x 240H cm NEW ❗❗❗ office container/residential container for sale❗❗❗ External dimensions: 240x 600x 240H Description of standard version: • Insulation roof/wall PU- 40 mm • Sandwich panels - (Standard RAL 9002) • Frame color - (standard RAL9002) • Floor - laminate • 1x 90x200 outer door • 2x windows (turn/tilt & fix) • LED lighting (inside/outside) • Electrical box with circuit breaker • 32 A power connection including sockets BS Containers have a high quality standard and are ISO 9001-2015 certified. The materials selected for the containers correspond to the specified EU standards. Our containers are particularly characterized by: High-quality materials Ijdpfxshw Nlao Ahyetb Stable construction Premium insulation individual design Versatile uses The price is a net price. For companies with EU VAT ID no. no VAT will be charged (price equals take-away price).

Condition: new, incl. continuous 150 cm ramp / Low loading height / Lashing eyes in floor Technical Data: • Brand: Martz • Model: BAU-3 260/2 S 2.7T • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Main inspection: 2 years from first registration • Internal dimensions (LxWxH): 260 x 150 x 25 cm • External dimensions (LxWxH): 460 x 210 x 164 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 522 kg • Payload: 2,178 kg • Chassis: Low loader (wheels next to the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Phenolic resin coated plywood floor, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp mounted on shaft • Strong eccentric locks • Insertion points at all 4 corners for tarpaulin frame, mesh attachment, drop side extensions or front wall extension • Robust support legs at the ramp • Lift assistance for ramp • Extra low chassis for shallow ramp angle • With bucket rest • 8x recessed lashing eyes in side frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reverse-automatics • KNOTT overrun mechanism and parking brake • Very stable, bolted reinforced V-drawbar • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Lane marker lights at rear • Integrated rear fog light • Rear frame lighting recessed • Automatic jockey wheel centrally mounted Optional accessories (on request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing light • Lashing straps • and much more. New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document shipping possible in advance or temporary license plates (Germany) can be provided Itsdex Tbkkspfx Ahyeb - Export license plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialized dealers & repair workshop for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, changes and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Including continuous ramp 150 cm / Low loading height / Floor-mounted lashing eyes Technical Data: • Brand: Martz • Model: BAU-3 300/2 S • Vehicle type: Construction machine trailer • Vehicle condition: New vehicle • First registration: None • MOT/Technical Inspection: 2 years from first registration • Internal dimensions (LxWxH): 298 x 153 x 25 cm • External dimensions (LxWxH): 499 x 211 x 162 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 545 kg • Payload: 2,155 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walkable steel mudguards • Grating step boards at rear on both sides Itodpfx Aox Tbkwohyob • Phenolic plywood floor, continuous jointless, anti-slip, and waterproof • Very stable welded steel frame • Frame fully hot-dip galvanized • Steel ramp, upright on shaft, 164 cm • Heavy-duty eccentric locks • Corner posts with tool-free removable locks for rear panel • Insertion points in all 4 corners for tarpaulin fittings, mesh sides, sidewall extensions, or front wall extension • Robust support feet at the ramp • Ramp lifting aid • Very low chassis for shallow approach angle • With bucket support • 10x recessed lashing rings in the side frame profile (1000daN/kg) TÜV certified • Three-sided perforated rail (Combi Protect Rail), can also be used with load bars and lashing straps – round holes 25 mm, elongated holes 54x25 mm • Maintenance-free rubber torsion axles by BPW/AL-KO • Automatic reverse function • BPW/AL-KO overrun brake and parking brake • Very stable bolted V-drawbar REINFORCED • 13-pin connector • Reversing lights • Large safety lighting system • Directional tail lamps • Integrated rear fog light • Lighting recessed in rear frame • Centrally positioned automatic jockey wheel Optional retrofittable accessories – please inquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For more than 30 years, we have been specialist dealers and repair workshop for Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more brands. - Errors, omissions, and prior sale excepted -

Condition: new, including frame for scaffold transport / 2x XL storage box Technical Data: • Brand: Martz • Model: SCAFF 370 S • Vehicle type: Construction machinery • Vehicle condition: New vehicle • First registration: Unregistered • TÜV/HU: 2 years from first registration Iedpfx Aex Tbkqehyjtb • Internal dimensions (LxWxH): 364 x 184 x 0 cm • External dimensions (LxWxH): 498 x 189 x 240 cm • Permissible total weight: 1,800 kg • Unladen weight: 464 kg • Payload: 1,336 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 195/50R13C • Axle: KNOTT rubber suspension axle • Jockey wheel: Yes, automatic • 100 km/h type approval: Optional, retrofittable DESCRIPTION • Plastic mudguards with tread plate reinforcement • Convenient loading frame, ideal for transporting scaffold components • 2x large accessory boxes for secure storage of small scaffold parts • Very robust welded steel frame • Complete chassis hot-dip galvanized • Maintenance-free KNOTT rubber suspension axle • Reverse automatic braking system • KNOTT overrun brake and parking brake • Very sturdy bolted V-drawbar, reinforced • 13-pin plug • Reversing lamp • Large-format safety lighting • Rear outline marker lights • Integrated rear fog lamp • Rear chassis-integrated recessed lighting • Centrally mounted automatic jockey wheel Optional accessories on request: • 100 km/h speed approval with shock absorbers • Anti-theft device • Spare wheel • Additional storage boxes • Reversing lamp • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration documents can be sent in advance or temporary number plates (Germany) can be provided - Export number plates incl. customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available in stock! For over 30 years your specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omissions and prior sale excepted -

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Condition: Itjdoxbyx Hopfx Ahyob As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Itsdpfx Aevu Rq Dshyob Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Included in the scope of delivery: 01x Light water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Durable, 3-layer construction Weight: 2.60 kg Your contacts at our company: Isdpfx Ahsw Ryl Teyetb Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any transport or shipping of this item beyond pick-up is subject to additional costs, which can be inquired with us depending on the delivery location and scope of delivery.