Used Gasket Cutter for sale (2,954)

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Hfodpjztxy Tefx Af Ask Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes.

Condition: used, The Lemorau CT 1500 is a manual core cutter. It offers quick and easy conversion for various core diameters and wall thicknesses. Hsdpfx Aszq U Uzof Ajfk The CT 1500 is very easy to operate: after the core has been slid onto the mandrel, the operator adjusts the end stop, which determines the width of the core cuts. The operator then presses the start button, lowers the knife using the handle, and cuts the core. - Maximum core length up to 1500 mm (59”) - Standard core diameters 25, 40, 50, 76 mm (1”, 1.57”, 2”, 3”) - Other sizes up to 152 mm (up to 6”) available as an option - Maximum measured cutting length 330 mm (13”) - Maximum wall thickness 6 mm (0.23”) for cardboard - Two-hand operation for operator safety

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Hsdpjyu Nqmefx Af Ajfk Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Year of construction: 2026, condition: new, functionality: fully functional, Achieve high efficiency with precision! The core cutter (standard 76 mm / 3 inches) features an automatic core magazine. Hsdpfxozt Rxhs Af Aofk The menu is in German. Process-controlled feeding of the core material and precise cutting to pre-programmed width and number of cores. Additional core adapters are available in 25 / 40 / 50 / 101.2 mm.

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Hsdpfjzpygyex Af Aofk

Year of construction: 2008, condition: ready for operation (used), A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible. Hfjdpow U T Upsfx Af Ask

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Hfedpoy Tx R Iefx Af Ask

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Hfjdpfxexgudbo Af Ask

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Hfodpfxjv Dkcfj Af Ajk

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Hedpfevamq Djx Af Asfk

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Hfedoyxq Ucopfx Af Aok

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Hedjy Tauhjpfx Af Aofk

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Hfjdpjzhnucsfx Af Aek

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Hfjdpfx Aszkvl Iof Ask

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Hsdpsdzp T Tofx Af Ajfk Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 861953, cutting length (max.): 2,050 mm, cutting height (max.): 60 mm, overall weight: 1,600 kg, cutting width at rip fence: 800 mm, Casati TSA/0 2050 Machine Number : 861953 Year of Construction : 1986 Cutting Lenght 2050 Cutting hight 60 Max rear feed width 800mm Hfsdpfx Afoztyfqe Aok Min rear feed width 25mm

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Hedpfx Asvvi Iqsf Asfk

Condition: ready for operation (used), Sheet format: 890x1180mm, inner frame width: 820x1120mm, pressing force: 300t, motor power: 4kW, length: 1800mm, width: 2100mm, weight: 4.3t. Hfedpfx Afjht Hfmj Aek

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Hodpfxsix Ahbs Af Aefk

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Hjdpfx Afeif Ek Rj Ajfk • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Hfsdpfx Ajfnlkwjf Ask Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: good (used), Equipment 2 knives Hedpfofbgaysx Af Asfk

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Hfsdpfxsl Dn N Se Af Ask Optional equipment: second EM 130 bump turn

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Hsdpfx Asd Iapysf Asfk Equipment • program • air table • side table right • side table left • light barrier • 2 knives

Year of construction: 2004, condition: good (used), Built in: 2004 Cutting width: max 2.600 mm Feeding height: 160 mm rear table length: 2.600 mm Front table length: 725 mm table height: 900-925 mm side table size: 750x570 mm machine depth: 4.180 mm Machine width: 4.400 mm Machine height: 1.720 mm continuous knife cycle rate: 40 hydraulic pressure: 1,5-65 kN minimum cut without false clamp: 40 mm Speed: 17,8 kW Weight: 8.900 kg Hjdpfjpfb Rtsx Af Aofk Equipment • chromed air table • side table right with air • side table left with air • digital program • program with color- display • 2 knives