Used Gathering Tower for sale (544)

Condition: used, functionality: unexamined, machine/vehicle number: nicht mehr vorhanden, overall weight: 200 kg, This is a laboratory spray tower with a water evaporation rate of 3 to 5 kg/h, using a two-component nozzle. It will be sold to the highest bidder. Crjdpfx Aezupiuektei

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 22,000 h, machine/vehicle number: 10060677, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, laser type: fiber laser, laser source manufacturer: IPG, laser source model: Modul, laser hours: 13,500 h, laser power: 6,000 W, laser wavelength: 1 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,100 mm, table width: 1,700 mm, table height: 900 mm, travel distance X-axis: 1,560 mm, travel distance Y-axis: 3,090 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 50 m/min, workpiece weight (max.): 920 kg, input voltage: 400 V, input current: 75 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 12,000 kg, total length: 10,500 mm, total width: 6,200 mm, total height: 2,500 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, BystarFiber with ByTower (storage tower) and ByTransExtended (automation). Cooling can be installed as a platform above the machine. The machine is serviced annually by Bystronic, and all laser modules have already been replaced. Credpfxsz S Nb Ro Aktsi

Condition: excellent (used), Year of construction: 2012, Ref:11157 . 2012 Aster Universe - Digital folding, gathering and book sewing machine The new sheet-fed solution for fast and versatile digital book production. This automatic folding and book-sewing machine is faster and features automatic set-up that reduces change-over time significantly, making the solution even more versatile. Csdpfxoz Hbvne Aktjri Equipped with: Flat pile feeder (for single sheet) Folding unit Collating unit Sewing unit Thread trimming device Delivery Touchscreen computer Automatic size change Specification: Max. speed 550 A4 sheets/min Sheet size:    Max:  420 x 640 mm / Min: 120 x 200 mm Signature size:    Max:  420 x 320 mm / Min: 150 x 100 mm

Condition: used, functionality: fully functional, Year of construction: 2010, machine/vehicle number: I1390-645, operating hours: 26,105 h, total length: 6,550 mm, total width: 5,750 mm, total height: 2,200 mm, overall weight: 1,700 kg, For sale is a pre-owned Tecnopool Flex-Spiral ambient cooling/resting spiral tower, manufactured in 2010. Designed for industrial bakery, confectionery, or general food processing applications requiring reliable ambient cooling or proofing. Codpfx Ako Ah Hluetsri

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 2,500 h, power: 3.5 kW (4.76 HP), input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, number of axes: 3, number of slots in tool magazine: 9, controller manufacturer: VHF, actuation type: electric, total height: 2,200 mm, total length: 3,500 mm, total width: 2,200 mm, overall weight: 1,000 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, VHF CAM 1530 PREMIUM – High-precision CNC gantry milling machine with extensive premium features Credpfoz Rz Hcox Aktji For sale is a high-quality, virtually new VHF CAM 1530 Premium CNC gantry milling machine. The machine impresses with its high precision, robust industrial design, and extensive features. It is ideally suited for the professional machining of plastics, aluminum, and other non-ferrous metals, wood, and composite materials. Thanks to the automatic tool changer, the precise Jäger high-frequency spindle, and the powerful vacuum table, the system offers excellent conditions for efficient and demanding production tasks. The machine is offered as a comprehensively equipped complete package including control system, software, and numerous accessories. Reason for sale As part of the continuous development of our company and the associated realignment of our production, we are investing in a larger CNC system with expanded machining capabilities. For this reason, we are selling our VHF CAM 1530 Premium. Technical highlights * High precision: Repeatability of ± 0.01 mm * Generous travel ranges: X = 3,050 mm, Y = 1,550 mm, Z = 290 mm * Automatic 9-position tool changer including tool length measurement * Jäger high-performance spindle with up to 40,000 rpm * Three-zone vacuum table with separately activatable areas * Backlash-free ball screw drives on all axes * Dual linear guides and double Y-axis drive * Maximum feed rate of 10,000 mm/min * Automatic tool length measurement and Z-axis zero point determination * Extraction system and air cooling, expandable to minimum quantity lubrication * Suitable for contour machining, engraving, and 2.5D and 3D milling operations Equipped with a powerful, liquid-cooled high-frequency spindle from Jäger: Type: Chopper 2300-40 K S5A * Rated speed: 40,000 rpm * Peak power (Pmax/5s): 3.5 kW * Continuous power (S1): 2.3 kW * Hybrid ball bearing * Runout and flatness each below 2 µm * Pneumatic tool change * Tool holder WK19 * Protection class IP54 Software and control The system features a comprehensive software package: * CNC Term – control software * Rhinoceros 6 Commercial – professional 3D CAD modeling software * Cenon CAM – CAM software on a separately integrated Apple computer in the control tower This provides a wide range of options for design, work preparation, and CNC machining. Extensive accessory package The offered complete package includes, among other things: * Haimer Zero Master – professional 3D edge probe * Handwheel control * Three-zone vacuum table (3,000 × 1,250 mm) with vacuum pump * Two pneumatically switchable clamping jaws * Automatic tool changer * 10 tool holders WK19 * 15 collets in various diameters * Various milling and drilling tools * Uninterruptible power supply (Schrack UPS USSEP100) An attractive opportunity for professional users With the VHF CAM 1530 Premium, you acquire a high-quality CNC gantry milling machine that combines precision, flexibility, and extensive automation functions in a single system. Particularly interesting for manufacturing companies, plastics processors, model makers, advertising technicians, and companies looking to expand their CNC production economically.

Condition: used, Format: 320 x 450 mm Equipment: Friction collator 10 Stations DFC Series collators use three prependicular rubber feed wheels to feed sheets into the machine. This ensures collators can grip the entire leading edge of the sheet to guarantee feeding of all sheet from A5 to A3 feed systems - 3 friction feed wheels Credpox Hzx Iefx Aktsi Capacity per station - 28 mm (260 mm sheets at 80 g/qm2) Min sheet size - 140 x 140 mm Max sheet size - 320 x 450 mm Paper weight - 50-130 g/qm2 Speed ??(games/hour) - 3900 games/hour 220 volts-mono

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Credpfx Ajz Tdc Sjktji Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) Codpfx Aeynkbmjkteri - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: used, mileage: 172,159 km, power: 265 kW (360.30 HP), first registration: 05/2006, fuel type: diesel, tire size: 445/75R22.5, axle configuration: 6x4, wheelbase: 4,790 mm, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: hydraulics, total length: 13,370 mm, total width: 2,620 mm, Equipment: ABS, crane, = Additional Options and Accessories = - Radio - Rear view camera - Toolbox = Notes = Spierings SK377-AT3 Dutch registration documents. Max. lifting capacity: up to 10.4 m - 7,500 kg. Max. reach: 33 m - 1,900 kg. Horizontal height: 20 m. Max. hook height: 35.7 m, reach 28.8 m. Crane hours: 12,839 h = Further Information = Cedpfx Aey T Hwvskteri General Information Operating hours: 12,839 Model number: SK377-AT3 6x4 / TOWER CRANE Technical Information Number of cylinders: 6 Axle Configuration Tire size: 445/75R22.5 Brakes: Drum brakes Suspension: Hydraulic suspension Front axle 1: Steerable; Tire tread left: 50%; Tire tread right: 50% Front axle 2: Tire tread left: 40%; Tire tread right: 40% Rear axle: Steerable; Tire tread left: 30%; Tire tread right: 30% Functional Crane: - Financial Information Price: On request = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2009, Max. PCB dimensions: 457x508mm, edge clearance top/bottom: 3mm, component clearance top: 90mm, bottom: 40mm, extended component clearance top: 190mm, supported applicators: AP nozzle diameter (standard): 2.5-16mm, extended AP nozzle diameter: 2.5-20mm, micro nozzle diameter: 1.5-2.5mm, jet tip nozzle diameter: 6-20mm, max. jet wave nozzle width: 25mm, height without signal tower: 1403mm, length: 1351mm, width: 1000mm. Equipment: manual loading, Drop Jet Fluxer with Dual Control System, titanium solder pot for up to 10kg of solder, motor control for X-, Y- and Z-axes, automatic solder replenishment (solder wire) and solder wave height detection, teach-in camera, Top-Side Preheat (upper heating with 4 segments, closed-loop temperature control), process camera, automatic solder feeding with solder level detection, Auto Fiducial System, Pillarpad offline programming software, machine refurbished in 2022, software upgraded to Windows 10 and new PH software. With PILLARHOUSE PILLARGEN-40 nitrogen generator, year of manufacture: 2022, 40l/min at 50ppm residual oxygen, with communication interface to the soldering system, air drying module and oil separator. An on-site inspection is possible. Crsdpfs Ah Ty Hex Aktoi

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: Crjdpfx Ako Ah Tlrotei • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)

Condition: used, This listing is for GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. Crjdpfsxxycaex Aktsi The unit is in full working condition and ready for immediate use. Automated biopharmaceutical column packing system optimizing resin performance for purification

Condition: used, 6 x clamping towers, 680 mm height, 360 x 360 mm at the base with rigid rack, Heckert pallet 400 x 400 mm Crsdpfxjytcfbs Aktei

Condition: used, Year of construction: 1998, offer consist of: Cjdpfx Aezwl A Ajktsri - expansion kit right conveyor CTK-100 Horizon CTK-100 c-Tower Kit extra function: collating to both sides - compatibel with: Horizon VAC-100a Horizon VAC-60Ha - weight: 5,52kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Crjdpfx Akjyvrvpetei Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, Collator Machine Horizon VAC 100a Zusammentragmaschine / Collator Machine Horizon VAC 100a Year 2008 - Serial-No. 412063 10 Stationen Zusammentragmaschine 10 Stations Collating Machine Format / Size min. 120 x 148mm - max. 350 x 500mm Papiergrammatur / Paper weight 40-300g/sqm Ladekapazität / Loading capacity 55mm each Station Panel Operation and Controls Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Die Horizon VAC 100a ist eine kompackte und morderne Zusammentragmaschine inklusive Kompressor EAB-100. Die Zusammentragmaschine hat Fehlblatt und Doppelblatt sowie Stau Fehlererkennung. The Horizon VAC 100a is a compact and modern collator, including the EAB-100 compressor.  The collator features missing sheets, double sheets, and jam detection. Csdsz H Avpspfx Akteri Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Collator Machine TMF N10 Zusammentragmaschine / Collator Machine TMF N10 Serial-No. 01450 10 Stationen Zusammentragmaschine A3 - 5 Stationen Zusammentragmaschine A2 10 Stations Collating Machine Size A3 - 5 Stations Collating Machine Size A2 Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Credpfx Asz H Avvoktji Handbücher / Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of manufacture: 2016 Lifting capacity: 150 kg Cedpfxezt U Ume Aktori Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2022, operating hours: 642 h, Rental possible Crodpfoztiplsx Aktoi = Further information = Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Crodpjyr H Anjfx Aktsi Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: used, Year of manufacture: 2016 Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Crjdezm E Auspfx Aktei

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Credpfs Ahkx Ijx Aktoi Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Horizon ST-40 Stacker / Reject Gate The versatile ST-40 enables the stacking of finished sets onto a lowering table as well as transfer to an optional booklet making unit—at the push of a button and without any conversion required. Additionally, the ST-40 serves as a reject gate for faulty sets during collation or booklet production. - Max. format: 350 x 500 mm - Min. format: 182 x 128 mm - Paper weight: 52 – 208 g/m² - Max. speed: 8,000 sets/hour - Stack height: 360 mm - Machine dimensions: 1,353 x 652 x 1,027 mm (L x W x H) - Power supply: Schuko plug, 230 V - Manuals in German / English, spare parts list included Cedpfx Akjwtmxaetori - Total of 3 delivery trolleys

Condition: ready for operation (used), functionality: fully functional, empty load weight: 12,300 kg, maximum load weight: 2,007 kg, DGUV certified until: 04/2027, Year of construction: 1980, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Valid safety inspection certificate until 04/27! TECHNICAL DETAILS Crsdpfx Akezuzmxetsi Boom: 30 m Hook height: 34.2 m Load capacity at 15 m reach: 2,007 kg Load capacity at 18 m reach: 1,588 kg Load capacity at 21 m reach: 1,300 kg Load capacity at 25 m reach: 1,030 kg Load capacity at 28 m reach: 881 kg Load capacity at 30 m reach: 860 kg Hoisting rope diameter: 9.07 mm Trolley rope diameter: 6.8 mm Telescoping rope diameter: 12.6 mm MACHINE DETAILS Empty weight: 12,300 kg EQUIPMENT Remote control Safety inspection certificate External reference: 633 The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible. Cedpfx Akozqu Hksteri