Used Ge Imaging Systems for sale (40)

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 140/500 Ljdpfxoxhdw Te Ahajah The unit is in full working condition and is ready for immediate use AxiChrom is a family of large-scale, low-pressure chromatography columns made by GE Healthcare The “140/500” refers to a column with inner diameter (ID) 140 mm and bed height up to 500 mm (the “long-tube” version Typical Uses Process development, scale‑up trials, and small/full scale production of biomolecules (e.g. proteins, antibodies) in biopharma or biotech. As part of purification workflows where large volumes and high throughput are needed, but still under low pressure (i.e. not high‑pressure liquid chromatography)

Condition: excellent (used), Buderus low-temperature boiler GE515-400kw Lajdpfov A I Hlox Ahaoh

Condition: excellent (used), Buderus GE315 heating boiler 230kW (0295), available with oil or gas burner on request Lajdpfexqry Iex Ahajh

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 50/300 Chromatography column The unit is in full working condition and is ready for immediate use The AxiChrom line is a series of chromatography columns by GE Healthcare (now Cytiva), designed for preparative / process chromatography scale. The “50/300” refers to the diameter and tube length / “bed height” configuration. Key details: 50/300: This is the smallest of the larger-scale columns. The “50” refers to the internal diameter (ID) of the column tube (50 mm), and “300” refers to the bed height (300 mm) for the “short” version. There is also a “50/500” for longer bed heights (500 mm). It uses axial compression, meaning the packing medium is compressed hydraulically from the top adapter, which helps ensure uniform packing density. Lodjxhdxdepfx Ahasah The materials are designed to meet regulatory standards (USP Class VI, etc.

Condition: used, this listing is for Cytiva Axichrom 100/500 chromatography column Ljdpezqf E Rjfx Ahajah the unit is in full working condition and ready for immediate use This pilot-scale column features automated axial compression for repeatable bioprocessing and downstream purification. Transparency report and technical audit: Software and media disclosure: as a direct-from-lab asset, any original software media or accessories found with the unit are included as a courtesy. licensing notice: we do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for procurement: This unit is sold as-is. while we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. ideal for labs with in-house technical expertise or existing service agreements. Sustainability impact: By choosing direct reuse, your facility avoids the carbon footprint of new manufacturing

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Laedpfxswauaro Ahaeh

Condition: excellent (used), Heating boiler Buderus GE315-140kw. Oil or gas Weishaupt Ledpfx Ahsmnqcqeasah

Condition: used, This listing is for the GE Healthcare BPG 200/270 Axichrom Chromatography Column Lajdpjyrrvgefx Ahaeh The unit is in full working condition and is ready for immediate use The GE Healthcare Axichrom BPG 200/270 is a high-performance chromatography column designed for preparative and process-scale purification. It is widely used in biopharmaceutical manufacturing, protein separation, and research applications. The column ensures stable packing, efficient flow distribution, and consistent separation performance for laboratory and industrial workflows

Condition: new, maximum load weight: 37,350 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame. * Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm. * Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports. * The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control. * Power supply via the vehicle battery of the towing vehicle. * NATO socket on the front wall, without connecting cable to the tractor unit. Fifth wheel coupling: * 2-inch kingpin, replaceable from below. Under-ride protection: * According to EC, permanently mounted. Support legs: * 2 x 12 t support winches with a 2-speed gearbox. Axles: * 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function. Steering axle: * 3rd axle as a trailing steering axle with manual and automatic reverse steering lock. Lift axle: * 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket. Tires: * 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120. Fenders: * According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear. Tire chock holder: * None Braking system: * Two-line braking system according to EC with EBS, automatic load-dependent control. * Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco. Ljdpfx Ahjy Up S Soasah Lighting system: * According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit. Load securing: * 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons. * 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons. * 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons. * In the outer frame, holes for lashing straps at approximately 500 mm intervals. Lashing stakes: * 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length. Lashing stake pockets: * 8 each on each side embedded in the outer frame. * 4 rows of stake pockets transverse to the loading area. Fl

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Lsdpfx Aewx Dctjhaeah Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Welded construction made of high-quality steel profiles with continuous profile crossmembers * Designed for high point loads * Outer frame made of UNP steel Fifth Wheel Coupling * 2-inch kingpin Under-ride Protection * Compliant with EC standards, bolted design Side Under-run Protection * Compliant with EC standards Landing Gear * With single-side operation on the right * Support load approx. 66 t / lifting capacity approx. 24 t. Axles * 5 x 10 t air suspension axle assembly * Manufacturer: SAF * With drum brake approx. 400x200 mm * ABS, AGS * Wheel connection centrally mounted, 10-hole with ET 0 * Total air suspension travel approx. 200 mm * Of which lifting approx. 140 mm and lowering approx. 60 mm * Control via rotary slide valve with detent function Steering * 1 axle with trailing steering * 2nd axle fixed * 3rd, 4th and 5th axles with forced steering via tie rod * Lubrication points of swivel bearing centrally located outwards * Axle lift: first and second axles automatically liftable * With additional shutdown on the chassis Braking System * Two-circuit compressed air braking system compliant with EC with EBS and RSS * Automatic load-dependent regulation * Manufacturer: Wabco. * Spring-loaded cylinders as parking brake * Interchangeable secured coupling heads firmly mounted on the front cross member * Without connecting line to the tractor unit * Aluminum air tank Tires * 10x 445/65 R22.5 164J on rim 14.00 x 22.5 ET 0 * Manufacturer of our choice * TPMS: Tire pressure monitoring system TPMS according to ECE R141 * With data transmission to the tractor unit Fenders * Compliant with EC standards, 1st axle at the front, 2nd axle at the rear Ljdpfez Dmndsx Ahajah * 3rd, 4th and 5th axles each one 1/4 PVC fender at the front and rear * Rear fender with mud flaps. Load securing * 5 pairs of folding lashing rings * Evenly distributed (tensile force approx. 24.5 t) * 11 pairs of hook plates welded into the outer frame (tensile force approx. 3 t) * 10 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t) * Recess pockets: - 10 pairs of recess pockets recessed in the outer frame * 6 pairs of recess pockets recessed in the floor (on the outside of the longitudinal beam) * Stake pockets: - 16 pieces of galvanized stake pockets, approx. 80x80x8 mm, approx. 850 mm usable length (with locking mechanism) * Stake magazine: one magazine for 8 pieces each on each side in front of the front wall * Stake pockets approx. 80/80 mm Front Wall * Bolted corner stakes with a steel approach plate over the entire width and height. Floor * Approx. 28 mm Z-hardwood floor recessed in the outer frame flush Lighting System * Compliant with EC standards, 24 volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights at the rear * License plate lights. 1x15 and 2x7-pole. Plug connection on the front cross member Equipment * Outrigger with holder, double * Warning sign according to ECE 70 * Work lights on the lamp carrier (switched via reverse gear) * Holder for rotating beacon at the rear (incl. rotating beacon) * One climbing ladder each side fixed including pluggable climbing aid - * Smart Board * Sticker "Vehicle swings out" * Sticker "Center of gra

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Laodpfoy Auhzjx Ahash Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard Lajdsz Dmn Dopfx Ahajh * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Lodpew U H Sbefx Ahaeah Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth wheel coupling: Fifth wheel plate with 2-inch King Pin. Rear underrun protection: Compliant with EC, bolted design. Laedoz N Nw Hepfx Ahaoh Side underrun protection: Compliant with EC. Kingpin supports: 2 x 12 t kingpin supports with leveling foot and single-sided operation on the right side in the direction of travel. Axles: 2x10 t air suspension axle unit, manufactured by BPW, with disc brake approx. 430x45 mm, wheel connection center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, of which approx. 110 mm lifting and approx. 70 mm lowering. Air suspension control via hand regulator with stop function. Steering: 2nd axle mechanically forced steering. Braking system: Dual-circuit compressed air braking system compliant with EC with EBS and RSS, automatic load-dependent control, spring brake cylinders as parking brake, interlock-protected coupling heads firmly mounted on the front crossmember, without connecting line to the towing vehicle. Manufactured by Wabco. Tires: 4 tires, 385/65 R22.5 164 K on rim 11.75 X 22,5 ET 120. Fenders: Compliant with EC, 1/4 PVC fender in front of and behind the axle unit. E-rack holder: 1 double basket with mounting material for one E-rack with ET120. Load securing: - 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). - 7 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). - A hole for lashing straps every approx. 500 mm in the outer frame. Stake pockets: - 8 pairs of stake pockets in the outer frame, evenly distributed. - 4 rows of stake pockets transverse to the loading area. Stakes: - 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. - Magazine for 20 stakes inside the front wall. Front wall: Bolted corner posts filled with aluminum hollow profiles, lined on the inside with approx. 9 mm screen printing board (approx. 1,250 mm high). Floor: Approx. 28 mm Z-hardwood floor recessed in the outer frame. Lighting system: Compliant with EC, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connector on the front crossmember. Equipment: - Wheel chock with holder, double. - Warning signs according to ECE 70. - Work lights on the lamp bracket (switched via reverse gear). - Holder for rotating beacon at the rear including rotating beacon. - 2 x PVC toolbox. Painting: Chassis blasted, cleaned, and hot-dip galvanized with high quality according to the latest technology. Superstructure parts cleaned, primed, and hot-dip galvanized. Chassis: Hot-dip galvanized + RAL, please specify. Outer frame: Hot-dip galvanized + RAL, please specify. Front wall: RAL, please specify. Front wall trim: Hot-dip galvanized. Hubs: KTL black. Rims: Silver. Rear underrun protection: White (RAL 9010). Attached parts: Galvanized / KTL black.