Used Gear Shaper for sale (7,571)

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Iodpfx Afoyucd Hjvetk Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Itjdpfjyfnlksx Afvjk Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table Isdpfx Afjh Sptnjvstk - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), SYKES 5 E MODEL, 2 UNITS AVAILABLE Double helical gear cutting, herringbone gear generator SYKES 1600 mm Special machine for gear power transmissions, oil, petrol & gas industry. In very good working condition. Itodpox Rvgusfx Afvok Specifications: Work spindle bore: 8.75" (222 mm) Tailstock to face of work spindle, max: 48" (1219 mm) Standard cutter diameter: 6" P.C.D. Standard cutter bore: 3.5" EXTERNAL GEARS: Blank diameter, max: 63" (1600 mm) Min: 0 Face width, double helical: 0 - 18" (0 - 457 mm) Face width, spur or single helical: 0 - 10" (0 - 254 mm) INTERNAL GEARS: Blank diameter, max: 66" (1676 mm) Face width: 0 - 8" (0 - 203 mm) P.C.D., max: 66" - (2 x rim thickness) Pitch range, max: 16 D.P. (1.6 Mod) Min: 1.5 D.P. (17 Mod) Helix angle range: 0 - 45 degrees Dimensions: 3300 mm (L), 3250 mm (W), 2700 mm (H) Weight: 18,940 kg

Condition: used, Year of construction: 2010, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Axle 1: left 8 mm righ8 mm Isdpfsy Enkbox Afvetk Axle 2: left 8 8 mm right 8 8 mm Axle 3: left mm right mm

Condition: good (used), max. module 2 hobbing length 135 mm total power requirement 2,2 kW weight of the machine ca. 1420 kg dimensions of the machine ca. 2,00 x 1,60 x 1,43 m --> Technical specifications Maximum milling diameter: Ø 150 mm --> Maximum milling length: 135 mm --> Maximum module: 2 --> Spindle bore: Ø 24 mm Ijdpfx Afezkvuvjvotk --> Spindle mount: MK-4 --> Cutter speeds: 140–1120 rpm --> Automatic feeds Equipment and accessories: Coolant system, cutters, change gears, operating instructions

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable Itedoh I Nqwopfx Afvok rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. Itjdpfew Tfb Sox Afvok A new control system and drives were installed.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg Itjdpfxszfv T Ij Afvok • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: ready for operation (used), functionality: unexamined, Gear hobbing machine – Celta model C4, with a cutter diameter of 480 mm, maximum workpiece diameter of 550 mm, and maximum module of 8. Total power: 9 kW, estimated weight: 4500 kg. Ijdezbzygjpfx Afvetk

Year of construction: 2023, condition: excellent (used), For sale: Friul Co C3 Dough Mixer and Kneader – 2023 model, like new We are selling a Friul Co C3 industrial dough mixer and kneader in excellent technical and cosmetic condition. This machine is ideal for bakeries, pizzerias, pasta factories, and artisanal bakeries where fast, consistent, and reliable dough processing is essential. Technical specifications: Iodpfx Afjzrnd Eovstk Manufacturer: Friul Co Srl (Italy) Model: C3 Year of manufacture: 2023 Power supply: 230 V Power: 1840 W Single-phase version IP54 protection Stainless steel construction Movable, lockable wheels Key benefits: ✅ Mixing and kneading in one machine ✅ Consistent dough processing, excellent end result ✅ Easy to operate and clean ✅ Robust, industrial design ✅ Reliable Italian manufacturing ✅ 2023 model, modern design The machine is perfectly suited for processing bread, pastry, pizza, and other yeast-leavened doughs. The automatic operation significantly reduces the need for manual labor and increases productivity. The machine is in like-new condition (approximately 5 hours of use). For more information or to schedule an appointment, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 2017, 468 USED Bongard square roll divider mod. Diwimach AGDP. EXTERNAL DIMENSIONS (in cm): - W: 75 - L: 90 - H: 115 (after opening 188) Itodjzqg Rbopfx Afvek TECHNICAL DATA: - year of production: 2017 - power: 1.8 kW - power supply: 400V 50Hz - weight: 380 kg - dough capacity: 4-20 kg - standard division: 20 pieces - capacity: approx. 900–1250 pieces/h The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: defective spare-parts repository (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Manufacturer: TRAUB Type: TND 550 Year of manufacture: 1993 Operating hours: approx. 40,000 hours Condition: defective / not operational For sale is a TRAUB TND 550, manufactured in 1993. The machine was in use at our facility until recently. Currently, the control system does not start, meaning the machine is not operational at this time. We have not investigated the cause of this issue further. Therefore, no statement can be made as to whether the cause lies in the control system itself, the power supply, or another machine component. The following defects were already known prior to the current failure: Gear shifting not functioning. The machine was permanently in gear 2, with a speed range up to approximately 3,200 rpm. Driven tools not functioning. Tailstock operation is performed via an added toggle switch. The turret moves or shifts only in slow motion. The ball screw of the X-axis causes running noises. The running noises of the ball screw of the X-axis have been present since we purchased the machine in 2021. Despite these running noises, the machine was able to reliably produce H7 fits until the current failure. The causes of the aforementioned defects, as well as the current failure, have not been fully investigated. Itsdpfszd Udiex Afvsk The machine is therefore explicitly sold as defective, non-operational, and in need of repair, and is suitable, for example, for repair, as a source of spare parts, or for reconstruction. Inspection is possible by appointment. Sale in the existing "as is" condition. All information is provided to the best of our knowledge, but without warranty. Sale with exclusion of any warranty for the mentioned and possible further, currently unknown, defects.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Itedpfxetiy Nto Afvok Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 1983, condition: ready for operation (used), A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment. Itedpfx Afezrn Nhovjk

Year of construction: 1981, condition: ready for operation (used), A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible. Iodpfx Ajzrn Nbefvstk

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Itjdpsy Hfm Njfx Afvok Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: excellent (used), Year of construction: 1977, Max. diameter: 800mm Ijdpfozfh R Eox Afvotk Max. module: 16 Year of manufacture: 1977

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Technical data: Power: from 0.55 kW to 2.2 kW Stock: over 1,600 units Total weight: approx. 30 tons Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Itodpfxey Tg Sas Afvjk Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Please note that unrealistic price offers will not be answered.

Condition: used, Year of construction: 2006, functionality: unexamined, For sale: lot of 7 industrial electric motors and gear motors. The lot includes: - Siemens electric motors - VEM ATEX explosion-proof motor - Gear motors with industrial gearboxes - Various sizes and power ratings Equipment originates from industrial application and has been professionally removed and stored. Condition: Used industrial surplus. Functionality has not been tested. Sold as shown in photos. Ideal for: - industrial maintenance - spare parts stock - conveyors - mixers - process equipment - machine builders Itjdpfozfwwbjx Afvjk Sale preferably as one complete lot. Location: Dunajská Streda, Slovakia (EU) Worldwide shipping possible.

Condition: ready for operation (used), Year of construction: 1998, SAC milling machine €2,000 Iedpjx Av Aqjfx Afvjtk Set of 20 cutter tools €2,000

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Iodpfjzg Iq Iex Afvotk

Condition: used, Year of construction: 1996, machine/vehicle number: 804, We offer this used Sumitomo NPG-2×1000 gear grinding machine, year of construction 1996. Itedpfxozn Em Ne Afvok Model: NPG-2×1000 Serial number: 804 Manufacturing year: 1996 year Size of Machine : 4700(W) x 6000(L) x 3600(H) [mm] Weight : 24,000kg Number of Containers : 1)40ft flat rack container x 1 2)20ft dry container x 1 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis PELCO MECCANICA CLOUD was manufactured in 2015. It features a working area of 2000 × 1000 mm and a Z-axis travel of 250 mm. The machine is equipped with a 12-position tool changer and an electrospindle speed ranging from 2000 to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the PELCO MECCANICA CLOUD CNC router we have for sale. Contact us for further details. Itedezug Egepfx Afvek • Suitable materials: wood, PVC, plexiglass, polycarbonate, polymers, high-density polyurethane (model making), soft metals • Applications: fast interpolations ideal for 3D machining, cutting, shaping • Feed rate (interpolated): 10 m/min • Tool changer: 12 positions, ISO20 • Electrospindle speed: 2000–18,000 rpm • Controls: handwheel for precise positioning; handwheel for feed rate adjustment during machining • Coolant: prepared for mist cooling system (unit not included) • Certification/year: CE, 2015 • Power supply: 400 V, 3-phase + neutral • Power consumption: 3.5 kW • Compressed air requirement: minimum 6 bar Additional equipment • Tool length preset probe • Chip collection tray/conveyor under the table with extraction outlet

Condition: ready for operation (used), Horizontal gear hobbing machine with master hob, Precimo model HR 3-ND-15. Maximum workpiece diameter: 250 mm. Maximum module: 7. Maximum diameter for module 7: 135 mm. Maximum diameter 250 mm for module 5. Maximum hobbing length: 335 mm. Minimum number of teeth to cut: z6. Maximum distance between centers: 735 mm. Maximum hob speed: 435 rpm. Estimated weight: 3500 kg. Ijdpfx Aey Swl Ujfvotk