Used Gear Test for sale (15,838)

Year of construction: 1976, condition: used, Technical details: diameter: 500 mm Djdpfx Aoyyapxjl Uekn workpiece weight: 30 kg test dia. min.: 200 mm total power requirement: 0,03 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1x0,5x1,06 m

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! Dkjdoy Hfm Njpfx Al Ujn This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation Dodpfeza Hzgex Al Uskn - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: used, functionality: fully functional, For sale is an Oerlikon bevel/worm gear unit of the E 37 EX 2 series, serial number 828499L01.1. The unit comes from a fully functional installation and is suitable for test benches, special purpose machines, and industrial drive applications. Technical specifications (general): Manufacturer: Oerlikon Type: E 37 EX 2 Design: Bevel/worm gear unit Application: Test bench technology, mechanical engineering, industrial drives Condition: used, functional Dedpsypb Iyofx Al Uokn

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Dkodpfx Alsza Ukio Ujn

Condition: used, Year of construction: 2018, Used angle head for Holz Her CNC machining centers Year of manufacture: 2018 HSK 63 F holder with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: max. drive speed: 8,000 rpm max. output speed: 12,000 rpm Dksdpfxswkbcne Al Usn Permissible operating temperature: 85°C Unit swivels 360° around drive axis Sound level: 80 dB(A) Weight: 3.257 kg Availability: short-term Storage location: Hochheim

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Dkjdpfxjzachcj Al Uen Commercial sale without warranty. Subject to change, errors and prior sale.

Year of construction: 2021, condition: used, Serial no. P61483, PC control, manufacturer Innomatec, touch display, process chamber, compressor station, peripheral units, roller trolley for crate provisioning. Subject to prior sale. Dkodpfx Aley A Ir Hj Uen

Condition: used, LDS V790 Shaker System LDS V790-335T Air-Cooled Vibrator + LDS HPA-K CE Amplifier + Control and testing accessories Professional electrodynamic vibration testing system Manufacturer: Ling Dynamic Systems Ltd. / LDS Industrial system for environmental simulation and vibration testing For sale is a used LDS V790 vibration testing system from commercial industrial use. The system is suitable for vibration tests, oscillation tests, environmental simulation, research & development, quality assurance, electronics testing, and industrial endurance tests. LDS Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3000 Hz Resonant frequency: approx. 2250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Dkodpfoy Uigcsx Al Uon Sine force peak: approx. 6.67 kN / 1500 lbf Random force RMS: approx. 6.67 kN / 1500 lbf Half-sine shock force peak: approx. 26.69 kN / 6000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support approx. 5.52 bar / 80 psi Optional air isolation approx. 5.52 bar / 80 psi LDS Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. / LDS Product: HPA-K Amplifier Model: HPA K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Design: HPA-K CE power amplifier Suitable for LDS V790 Shaker System Weight: approx. 750 kg Control / Accessories According to the pictures, the system includes, among other things: LDS amplifier unit / control cabinet Control and rack units PC workstation with monitor, keyboard and mouse Cables and connection accessories as shown in the pictures Emergency stop units / safety accessories A functional test under load has not been documented. Inspection and testing on site are possible and desired by arrangement. Condition Used industrial system. Optical condition see pictures. Normal signs of wear and storage are present. Some scratches, paint chips, dirt and signs of use are visible. The system comes from commercial industrial use. All information is provided to the best of our knowledge based on the visible nameplates, pictures and available documents. Scope of delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control / rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Available documents / manual Items not explicitly mentioned are not included in the scope of delivery. Scope of delivery exclusively as shown in the pictures or by arrangement. Transport / Collection Heavy industrial system. Transport only by a suitable freight forwarder or industrial transport. Collection and loading by prior arrangement. Inspection, testing and re-measurement on site are expressly possible after prior arrangement. Notes on sale Sale exclusively to commercial customers. Used goods from industrial use. Sale without guarantee, without warranty and without return. Errors, intermediate sales and technical deviations are subject to change. All technical specifications are without guarantee. We will gladly answer further questions via message.

Condition: used, Power: 0.18 kW Dkjdpfx Aoqgm Tiol Usn For edge banding machine Homag type KL 37 DS or similar.

Condition: good (used), Year of construction: 2005, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2005 CIMC tank container 20FT ISO tank container, 25,010 L / 1 compartment. T11, UN PORTABLE Steam heating Bottom discharge Design temperature: -40/+130 °C 5Y+CSC test valid until 05/2027 = Additional Information = General information Year of manufacture: Aug. 2005 Model year: 2005 Weights Empty weight: 3,800 kg Djdpfx Alezb Ei Ej Uokn Payload: 32,200 kg Gross weight: 36,000 kg Functional Cargo volume: 25,000 l Body brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: good Further information Contact Arne Honingh for more information.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Djdpfxoxw N Uve Al Ujkn Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: excellent (used), Year of construction: 2006, Siemens Sinumerik 840 D, 5 axes controlled. Wheel diameter max 2000 mm Dksdpeza Egbefx Al Uen 700 mm wheel width Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m

Condition: used, Year of construction: 2002, technical data only send through email. Dksdpfx Aezb Rdzel Uon

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW Dksdpjy Umizefx Al Uon weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 66 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 50 mm -Protection class: IP 33 -Foot damaged, see picture Dedpfx Aljdkqg Ho Ujkn -Dimensions: 910/294/H350 mm -Weight: 115 kg

Condition: excellent (used), Type: UF 450plus Airflow: forced recirculation Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Djdpfxoy T Ictj Al Uskn Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculation: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with an approx. 12 cm diameter. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dedpfsy Auy Rjx Al Uskn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 Dkodpjwniikofx Al Ujn - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: VEM, Geared motor type ZG3 KMRA 80 G 6 -Speed: 31.5 rpm Djdpfjh Ezffsx Al Uokn -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Number: 1x motor available -Price: per piece -Dimensions: 485/205/H235 mm -Weight: 25 kg/pc.

Condition: used, Year of construction: 2015, Pfeiffer LTS-KKB/120 Helium Leak Test Chamber (2015) Djdpfxjy Uxnco Al Uekn 3x400V/50Hz/3x100A 7700kg weight

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm Dodpfev U T Dyjx Al Uekn workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t Dedpfsv U Un Hox Al Uokn

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SAF 37 DR63M4/TF i = 86.36:1 Dedpfx Aley Tuhps Uskn -Speed: 15 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 335/190/H145 mm -Weight: 11.3 kg

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Djdpopxmliofx Al Ujkn Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle