Used Gildemeister for sale (236)

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Hfjdowym Nfepfx Ahash Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Monitor Display (108142) Make DMG Gildemeister Type Supply 11098, Hodpfx Asigqr Hjhajfh I.D.-No.259284 Monitor was taken from a mechanically defective machine function was tested

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation Hfsdsxcupcepfx Ahajh - The machine can be purchased via installment plan or leasing.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. Hfodpfxey Erzdo Ahaeh 2x HITACHI SEIKI CNC lathes

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain Hedpfx Ahsy A Imqsaefh With conveyor With driven tooling With documentation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister Lathe Color: White 3 axes X, Z, C Model: CTX 400 Series 2 CNC Heidenhain Hfsdjy A Ilyspfx Ahash With chip conveyor With driven tooling With documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Turning length: 1,050 mm Hodpfx Asy D I Ttshaofh Swing diameter: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Tool holder: VDI 40 Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: good (used), Year of construction: 2004, Number of spindles: 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke of radial slide: 52 mm Hedpfxow Rfcdo Ahaofh Adjustment of radial slide: ±12 mm Max. stroke of axial slide: 72 mm Max. stroke of tool spindles: 106 mm Adjustment of tool spindles: ±10 mm Main spindle speed: 500 - 4,000 rpm Cycle time per part: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

Condition: excellent (used), Swing over bed 212 mm Distance between centers 750 mm Spindle speeds 10-4'000 rpm Hfjdpfx Asud Nb Iehaeh Control: HEIDENHAIN Manual Plus Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Interpolating C-axis Reinforced coolant pump 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Hfsdpfx Ahsy Dckasash Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Hjdpfx Ahsvuqm Seasfh Chuck diameter: 250mm X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Spindle bore: 79mm C-axis Number of work stations: 12 Videos available!!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Hedpsy T Ikkefx Ahaefh Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Hedpfx Ahoy T Id Deaefh Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm Hsdpfsy T Iddsx Ahaefh MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510 Control: Siemens 840 D with Shop - Turn Hfodey N S E Rjpfx Ahash Year of manufacture: 2004 Travel X / Z: 300 / 1050 mm Turret: 12 stations Tool holder: VDI 40 Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle hours approx.: 14,000 * Batch sizes of 0 - 5 have been produced on the machine * Programming was carried out directly at the machine

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. Hfodoyz Sdqopfx Ahash *

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. Hfsdpjyzyudefx Ahajh This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, with various components being replaced. This overhaul, performed by DMG Used Machine, cost €60,000 alone. Here is a brief overview of the work carried out during the overhaul: - Retrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy chain (Z-axis) - Replacement of all components in the energy chains X and Z (cables, hoses, fittings, etc.) Hfjdpfxjy I U Ulo Ahaoh - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 mm chuck (KH400). Control system: Heidenhain. The machine is still occasionally used for production. Inspection is possible at any time, and the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; please inquire.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment Hfedex Stlqepfx Ahaeh • Tool holders (as shown in pictures) will follow • Tailstock will follow Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. Hfedpfsy Iuvcjx Ahaeh type: NEF 400 serial number: 01620009641 year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Bar diameter: 66 mm Hydraulic tailstock 12-position turret With chip conveyor Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Hfjdpfxsx Sx Htj Ahaeh Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Hodpfx Aey Hppzohasfh Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Turret w/8 stations Control: Siemens Sinumerik 840 C Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: used, Year of construction: 2001, turning diameter . mm turning length . mm control . type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm Hedpfx Asyqwb Eohaefh turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Hello, Hfedpsy Rb H Hsfx Ahajh I have for sale a DMG GILDEMEISTER CTX 310 V3 CNC LATHE with driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control system: Heidenhain Data Pilot 4290 Country of origin: Germany Year of manufacture: 2003 - Total machine operating hours: 9,144 h Machine specifications: - Turret: 12 tool positions for VDI-30 holders + TurnPlus attachment - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Hydraulic tailstock - Through-spindle - Max turning diameter (X-axis): 190 mm - Max turning length (Z-axis): 455 mm - Cooling system - SMW AutoBlock three-jaw hydraulic chuck - Spindle bore diameter: 50 mm - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 3.8 t - Loading included in the price The machine has undergone a full service inspection. 100% operational. Connected and ready for work. Stal-Com has been engaged in sales, service, and training on DMG group CNC machines for 19 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. Every machine undergoes a meticulous technical check. Apart from Polish customers, our machines are also purchased by clients across Europe and parts of Asia. Each machine can be inspected in operation, as we also provide machining services. After purchasing a machine from us, we conduct operator training and can also set up production of parts at the customer's facility. We cooperate on a long-term basis with many companies, supplying them with further machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system Hedpfx Aey Rb Ecshaofh - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.