CNC turning and milling center

Gildemeister TWIN 102

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 Ledpfx Agsyaqgyepsrp - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 1998, operating hours: 8,700 h, functionality: fully functional, The used DAEWOO Lynx 200B 2-axis CNC lathe is a robust and fast numerically controlled lathe with a slant bed and flat guides, compact in size. It is equipped with a FANUC 21-T CNC control unit with LCD monitor, year of manufacture 1998, and complies with CE standards. Main features: Max. swing over bed: 460 mm Max. turning diameter: 280 mm Max. turning length: 500 mm Max. bar capacity: 51 mm Spindle nose: ASA 6” Spindle: max. rotation speed 4,500 rpm Spindle motor power: 11 kW Turret: 10 positions Turning/boring tool size: 25×25 mm / Ø40 mm Tailstock: quill diameter 65 mm, quill stroke 80 mm – MT4 Machine weight: 3,500 kg The equipment includes the tailstock with programmable quill, tool presetting system, 3-jaw hydraulic chuck (which will be supplied in place of the manual chuck), and operating and maintenance manuals. Ljdsx Nqlispfx Agperp

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck Lredpfx Asvxhdcsgpop

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Ljdpfxew Tl Ifs Agpjrp

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Ljdpfxsyfnqgo Agperp Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 - C-axis

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm Lrsdpfx Asy I A U Hsgpjp travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,928 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 389 mm, overall weight: 3,760 kg, number of axes: 3, This 3-axis Biglia B301 SM was manufactured in 2006. It features a robust Hainbuch collet chuck for both the main and counter spindle, ensuring precision in your turning operations. The machine has a weight of 3760 kg and operates at a spindle speed of 504 RPM. If you are looking to get high-quality turning capabilities, consider the Biglia B301 SM horizontal turning machine we have for sale. Contact us for further details. • Electrical: 400 V, 3 phases, 40 A, 50 Hz • Spindle speed: 5000 RPM • Workpiece counter: 30 • The spindle bore is 42 mm • Operating time: 16,928 h Lrodeyx T Rajpfx Agpjp Additional equipment • Hainbuch collet chuck for main spindle • Hainbuch collet chuck for counter spindle • LTA dust extraction system • Not included: loading magazine, tool holders, collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 PARTS CATCHER TAILSTOCK Lsdpfxjygidks Agporp CHIP CONVEYOR

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Lrsdpfxoxrgglj Agpsp

Condition: good (used), General Information: Ledpfxsy Ixxbs Agpsrp Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )