Used Glue Applicator for sale (9,433)

Condition: used, Year of construction: 2014, functionality: fully functional, Roller Glue Spreader OSAMA SBR 250 Working width: 230 mm Working height: 0 – 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Fodpfx Aez H H Ivsl Ujpn Motor power: 0.18 kW CE marking

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Fpodoz Ekbkjpfx Al Ujn Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Fpedpfjz E A T Esx Al Uen Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Fpjdpfx Alez En Axj Ujn Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Single-sided glue application Fpodpfezxpvvex Al Ujn Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Fodezuzp Tepfx Al Uspn Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), functionality: fully functional, Combination in as-new condition (hose L=3m and applicator gun are new), the glue unit has hardly been used. This unit features a 5 kg tank and two hose connections. The unit is equipped with a gear pump, ensuring a consistent and even output (no dead stroke as with an air pump). Now offered at a special price for this combination. Fpodpfxsxr Itas Al Ujn

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Fpsdpfoy D Hfzex Al Usn Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 034108905, BOBST 100 II - A2 folding and gluing machine, manufactured in 1999. This efficient machine is designed for the production of straight-line packaging and packaging with a crash-lock bottom, handling cardboard and corrugated board. It features 6 cold glue applicators and one hot glue applicator. It also has a wheel-fed glue system with a container. It glues at 6 points – with various glue application methods. It includes a cassette for gluing envelopes. The HHS system in this version is very good – it can be used to produce envelopes, Advent calendars, and boxes. The machine can be inspected at our printing facility in Szczecin. Fpodpfx Alezwmvqe Uon

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Fpjdpfx Alex R Sn Is Ujn

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, pressing force: 90 t, total length: 7,700 mm, total width: 7,400 mm, total height: 2,350 mm, working width: 1,300 mm, working length: 3,000 mm, Throughfeed press for laminated panels ITALPRESSE PL/9 Shelf length: 3000 mm Shelf width: 1300 mm Number of vertical cylinders: 6 Vertical cylinder pressure: 90 t Fpodpfx Aoxy Rm Esl Ujn Vertical cylinder diameter: 70 mm Number of horizontal cylinders: 6 Shelf heating using a high-frequency generator The line consists of: – Material feed section – Glue application section – Material loading section – PL/9 press – Output table for material CE certificate Line dimensions: 740x770x235 cm (H) Weight: approx. 8000 kg

Condition: ready for operation (used), Year of construction: 1986, Ott Höfer 2-Roller Glue Application Machine Fodpfx Alsxqrdaj Uepn ZLA 1300 Working width: 1300 mm Max. workpiece thickness: 80 mm Roller diameter: 165 mm Both rollers are in good condition Feed speed: 18 m/min Drive power: 0.75 kW Working height: 800 mm Required space: 2000 x 750 x 1150 mm Weight: 500 kg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm Fjdjt Nfarjpfx Al Uopn • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm Fpodpjquuv Iefx Al Uon USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: ready for operation (used), working width: 2,000 mm, roller diameter: 350 mm, Glue spreader for plywood manufacturing. Width or length of the glue rollers: 2000 mm Diameter of rollers: 350 mm Fpjdpfx Aljzazfts Uon Rollers are covered with some Polyurethane material. The unit is frequency controlled for the feeding speed.

Condition: excellent (used), Year of construction: 1998, HÖFER LAN 1300 Adhesive Coating Machine For the efficient application of water-soluble dispersions (white glue, etc.) on one or both sides. Coating width: maximum 1300 mm Drive: 0.37 kW geared motor Rubber-coated coating rollers: Ø 170 mm Grooving for coating quantity: approx. 120 g/m² (for veneers) Constant coating speed: approx. 16 m/min Working height: approx. 900 mm Maximum workpiece thickness: 80 mm Design complies with CE standards Manual feed Operating side: right Including swivel casters Machine dimensions L x W x H = 1750 x 660 x 1300 mm Fjdpfx Aoza A Aaol Uepn

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm Fpodpezzz N Hsfx Al Ujn - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Fpedpsz Ekczefx Al Ujn Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing for package dovetail joint systems Fjdpfsul Shnjx Al Uopn Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested

Condition: excellent (used), For sale: a glue roller from Karl Tränklein, a renowned German manufacturer of bookbinding machines. This device is designed for the precise and uniform application of glue to paper, cardboard, corrugated board, veneer, and other flat materials. The machine is equipped with an electric drive, a metal working roller, and adjustable glue application settings, allowing the operating parameters to be adapted to the type of material being processed. Its robust, heavy-duty construction ensures stability and long-term durability. Technical specifications: Manufacturer: Karl Tränklein Country of origin: Germany Type: glue roller / applicator Drive: electric Power supply: 400 V Adjustable glue application Fsdpoziwx Tsfx Al Uepn Metal working roller Work table with guides Drip tray for excess glue Heavy-duty, robust construction Applications: bookbinding, printing, packaging production, gluing paper, cardboard, and corrugated board, applying glue to veneer and other flat materials. Condition: used, fully functional. It shows normal signs of wear and tear from use. The visual condition and completeness are consistent with the photos.

Condition: used, Year of construction: 2020, Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data - Capacity: 10,000 bph - Application: Juice Fpsdpfx Aljzazkvs Uon - Configuration: Gernep Labetta 4/3/10 640 2A - Labelling technology: Cold glue / Rollina - Labelling stations: 2 × cold glue aggregates - Bottle Formats - Container type: Glass bottles (fruit juice) - Typical formats: - 1.0 L VDF (H=307 mm, Ø90 mm) - 0.5 L NRW (H=260 mm, Ø68 mm) - Special capability: - Suitable for hot-fill applications - Label Data - 1st cold glue station: - Label length: approx. 25 – 140 mm - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 320 mm - 2nd cold glue station (incl. wrap capability): - Label length: approx. 25 – 140 mm - Up to 170° wrap-around of bottle circumference - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 220 mm - Applications: - Body label - Front (chest) label - Back label

Condition: used, Year of construction: 2009, Second-hand machine Year of manufacture: 2009 Condition: factory-refurbished by Osama Technologies Features and technical specifications: - Automatic gluing machine with two rollers - Working width: 1000 mm - Usable working thickness: 0–100 mm - Application rollers Ø 185 mm - Feed speed 24 m/min - Work surface height: 800 mm Fedezk Nxbopfx Al Uopn - Groove spacing between rollers: 2 mm - Motor power 0.37 kW - Glue distribution tank made of painted sheet metal - Water tank made of galvanised sheet metal - CE marking - Voltage 400/50/3Ph Availability: at short notice Location: Röllbach

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 Fpodpfxouzv E Rj Al Uon FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle Fpodpfx Aljzhaadj Uen - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 5,500 bottles/hour - Formats: Fjdpfx Aljyzcyco Uepn - 0.75 L Bordeaux (H=309 mm, Ø74 mm) - 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 L Schlegel (H=309 mm, Ø89 mm) - 0.75 L Burgunder (H=297 mm, Ø82 mm) - Application: Labelling of glass bottles (wine) - Configuration: Rotary machine with 2 cold glue labelling aggregates - Label positions: Body (front), neck ring, back - Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates - Glue system | Krones | Glue pump - Control panel | GERNEP | Touch panel