Used Glue Applicator for sale (9,000)

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Hodpfx Agoqu N U Djzjg Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Hedpfx Ajfguntegzjg Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000x2500mm(78 "x98") 60mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Rotating inclination changer with measuring unit 1080 FPS-25/20U2 gas press / surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 cork applicator / spacer cork 1110 VFL-1/20D Sealing robot Incl. shapes + triple glass 2x Hsdorr Sy Ajpfx Agzjg 1120 DOS-1PUD Mixing incl. 2 x 200L + Hardener press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension : 350 x 180 mm Max dimension : 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Level: not possible, step nozzle is missing Georgian Bars: No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min dimension : 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Step: not possible, step nozzle missing Sprouts: No Gas type: Argon Models: according to the LIsec model catalog radius limitation 250 mm The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000 x 2500 mm(78 "x 98") 60 mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Drehbarer Neigungswechsler with messeinheit 1080 FPS-25/20U2 gas press / Surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 Korckapplicator / Spacer cork 1110 VFL-1/20D Sealing robot IncL. Shapes + Tripple glass 2x 1120 DOS-1PUD Mixing inkcl. 2 x 200L + Harderner press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension: 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Level: not possible, step nozzle is missing Gorgian Bars : No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min. dimensions: 350 x 180 mm Max. dimensions: 2000 x 2500 mm Total ISO thickness: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Step: not possible, step nozzle missing Georgian bars: No Gas type: Argon Models: according to model catalog LIsec radius limitation 250 mm Sealant: PU

Condition: like new (used), Year of construction: 2017, functionality: fully functional, High-quality DMS valve applicator - used, but in like-new condition! For sale is an excellently maintained, used DMS aroma valve applicator from Deerberg Mechanical Systems (DMS GmbH), built in 2017. The device was only used for testing and is therefore as good as new. Technical data: • Project number: 639001 • Year of manufacture: 2017 • Supply: 400V 50Hz +N +PE • Rated current: 18A • Input fuse: 25A • Control voltage: 24VDC Ideal for precise and efficient aroma valve applications in demanding industrial environments. Although the aroma valve applicator is used, it has always been carefully maintained and is in like-new condition. It is ready for immediate use and offers reliable performance for a wide range of industrial applications. Collection and shipping possible Hedpfev Hzr Aex Agzeg *Shipping prices are calculated individually! Sale without any warranty

Condition: excellent (used), Block Gluing Press STROMAB SL2-6000 Gluing length: 6000mm Gluing height: 1200mm Maximum gluing width: 200mm Number of vertical hydraulic presses: 12 Number of frontal presses: 6 Cylinder diameter: 70mm Vertical cylinder pressure: 7300kg Hjdpfowzg Scjx Agzeg CE certificate DTR documentation

Condition: good (used), - Capacity : max. 3000 bph - With cork presence control, at the inlet - Cork dust blow-off on the bottle - With capsule applicator - With shrink head - Running direction: left - right - Machine completely overhauled - Machine in very good condition Hodpfx Ajralruogzog

Condition: good (used), Year of construction: 2014, 2 pcs. KOCH glue gun, type: LP, year of manufacture: 2014 with Wagner high-pressure glue pump Hsdpfx Agjv Dvapozsg Automatic glue application (counter-hole gluing) Machine no. A1410/8413 Three-phase current 220 V/ 50 Hz Connection value 0.2 kW Pump type 18-40 Series no. D14 3042 Max. material pressure 14.4 MPa Transmission ratio 18:1 Delivery rate DH 40 cc Max. air pressure 0.8 MP a Max. material temperature 80° Weight 100 kg (Subject to changes and errors in the technical data and subject to prior sale)

Condition: ready for operation (used), working width: 2,800 mm, roller diameter: 220 mm, pass-through height: 100 mm, Glue application machine Manufacturer: Friz Working width 2800 mm Passage height 100 mm 2 rubber-coated, grooved application rollers, diameter approx. 280 mm 2 chrome-plated dosing rollers, diameter approx. 220 mm Roller length 2850 mm electric height adjustment Feed speed 28 m/min. Drive motor 3.0 kW Lifting motor 0.25 kW Hsdpfjwganzsx Agzsg Pump motor 0.8 kW Emergency stop pull cord on both sides Dimensions approx. 4700 x 1200 x 2200 mm (LxWxH) Application rollers still in good and operational condition. Machine will be cleaned and function-tested upon order.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, total length: 2,500 mm, total width: 2,000 mm, working height: 2,000 mm, VSA-25/20D1 RTVB-11-20ST SSV-20 Lisec VSA-25-20D1 2000x2500 S-IGL-1878 Hsdpfx Aovyzatogzeg

Condition: reconditioned (used), functionality: fully functional, working width: 220 mm, Glue Spreader 220 mm Specification: • Condition – fully functional, after inspection • Working width – 220 mm • New rubber coating • Single, fixed speed • Manual height adjustment • Motor power: 0.37 kW (1,370 rpm) • Overall dimensions: 70 x 60 x 70 cm (L x W x H) Additional information: Hjdpfx Agjxdxw Tezeg • Perfect, factory-level technical condition • The photos shown accurately reflect the actual condition of the item for sale • Possibility to power on and test the machine on-site

Condition: excellent (used), Assembly press ITALPRESSE SR 3/100 Hjdpfxowyailo Agzjg Working length: 3300 mm Working height: 1800 mm Number of vertical cylinders: 4 Stroke of vertical cylinder: 200 mm Number of horizontal cylinders: 2 Stroke of horizontal cylinder: ~110 mm Machine control via control panel Manual and automatic operating modes

Condition: used, Year of construction: 1999, machine/vehicle number: 4127, SECOND-HAND 4 ROLLERS GLUE SPREADER OSAMA S4RP-1300 - WORKING WIDTH CM. 130 WITH GLUE MIXER - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Working width 1300 mm - Automatic washer for rollers - N. 4 rollers - Volt. 380/50 Hodpfewr Dc Tjx Agzog - S/N 4127 - Year 1999 - *m57

Condition: reconditioned (used), Year of construction: 2007, Connection 220V, compressed air connection 6 bar, weight approx. 110 kg, mobile, dowel feed via vibratory feeder, automatic dowel length and diameter control, fully automatic electronic control system, rinsing-gluing-gluing+driving in, rotary switch for glue/water to rinse, glue residue indicator, stainless steel container for glue, stainless steel container for water, 1x gun for dowels with diameter 8 mm length 20-50 mm, operating instructions - Hjdpfxjwrruqo Agzog

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order. Hodpfxsv Sa Ute Agzsg

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Hedewu Dnnepfx Agzjg Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: like new (used), Working width: 1400 mm Glue application adjustment Stepless roller speed adjustment Safety switch Hsdpfx Asxalbwegzog

Condition: as good as new (ex-display), This type of semi-automatic machine allows the application of a removable self-adhesive protective film on delicate surfaces and is therefore particularly suitable for painting and panel packaging processes. The film is applied to the panel without debonding, the application of the film can be adjusted more or less long. The machine is suitable for panel masking, to avoid overspry in painting, thus avoiding long and costly manual protection. Hjdpfx Agoru A Raszeg Suitable for medium production or small batches. Useful working width 1300 mm.

Condition: used, Year of construction: 2000, machine/vehicle number: 2852, SECOND-HAND GLUE SPREADER OSAMA TYPE S2R1300 - 1300 MM. - CE RULES Hodpfx Ast U Iupsgzjg - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - volt. 380/50 - sn 2852 - year 2000

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: E0W0530R2V, For Sale: PREO Easy 5kg W Gear Pump Glue Melter 5kg Adhesive Melting System Basic Information: Device: Glue Melter 5kg Adhesive Melting System Model: PREO Easy 5kg W gear pump Hjdewyk Rmjpfx Agzeg Heating power: approx. 2400 W Slot Nozzles: 250 mm (PREO 600W) and 5 mm (Nordson - TrueCoat Applicator - LU14H03469 200W) Hose: Preo, approx. 1 m length (198 W) up to 210°C The device can be viewed in Piaseczno by prior appointment. Includes user manual. On-site startup and demonstration possible.

Condition: new, Year of construction: 2024, Basic info: • Intuitive 7" touchscreen display on the rotating applicator head, with convenient position lock • Up to 20 user programs • 3 automatic programs: flat, hard-to-reach surfaces, repainting • Handle and foot for easy transport in the paint shop • Gun rest handle prevents the gun from falling off the applicator • Powder cable holder prevents damage and optimizes powder flow to the gun • Accessories drawer - nozzles and spare parts • Attractive, modern design • Quick color change with collection directly from the box • Automatic cleaning function - gun blow-off • Remote control of paint amount and program changes from the handle level Hsdpfx Aeflpi Njgzeg • A complete set of hoses included; 6m - antistatic hose • Stand with vibrator and suction unit with fluidization Additional info: • Powder consumption up to 200g/min • Air consumption up to 200L/min 6 Bar • Air quality / water vapor - less than 1.3g/nm 3 • Air quality / oil - less than 0.1mg/nm3 • ATEX compliance 2mJ

Condition: like new (used), Working width: 1000 mm Glue dosage adjustment Manual adjustment of roller spacing Emergency stop switch Hsdpfxowqdpko Agzsg

Condition: used, Year of construction: 2008, machine/vehicle number: 21543, SECOND-HAND 2 ROLLERS GLUE SPREADER OSAMA S2R 1300 - CE RULES - Chiller (Heat conditioner) Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. Hsdpfx Aor Ixy Iegzsg This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - N. 2 rollers - Volt. 400/50 - SN 21543 - Year 2008

Condition: excellent (used), Working width: 30 cm Adjustable glue application rate Single-sided glue application Hsdpfx Agowkgt Eezeg Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: used, Year of construction: 2004, SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES Hsdpjmxkxujfx Agzjg - Working width 1300 mm - N. 2 rollers - Year 2004

Condition: used, Year of construction: 2000, machine/vehicle number: 2855, SECOND-HAND GLUE SPREADER OSAMA MOD. S2R 1300 - CE - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Hsder Iyf Topfx Agzsg Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - Volt. 380/50 - S/N 2855 - Year 2000