Used Glue Spreader for sale (1,479)

Condition: good (used), Year of construction: 2019, operating hours: 6,399 h, load capacity: 2,500 kg, lifting height: 4,590 mm, fuel type: electric, mast type: triplex, construction height: 2,925 mm, empty load weight: 5,500 kg, mileage: 6,399 km, Electric duplex forklift Brand: Still Year of manufacture: 2019 Hours: 6,399 hours Capacity: 2,500 kg Lifting height: 4,590 mm Chodszw Nxbspfx Aknec Mast height: 2,925 mm FEATURES: FREELIFT SIDE SHIFT FORK SPREADER Extendable forks, widest position 92 cm, fork length 132 cm, extendable to 220 cm Seat heating, swivel seat with air suspension Rear-view camera and reversing sensors Radio, heater, fan for cooling Battery from 2019 with charger Automatic filling system Watch the video on YouTube

Condition: used, functionality: fully functional, machine/vehicle number: A26016, Year of construction: 2007, operating hours: 16,900 h, load capacity: 45,000 kg, lifting height: 16,060 mm, fuel type: diesel, mast type: telescopic, construction height: 4,910 mm, power: 257 kW (349.42 HP), empty load weight: 78,200 kg, drive type: Diesel, Full container reach stacker Chassis number: A26016 Cjdpfszw R Dfox Aknjhc Mast type: Telescopic Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 18.00-33 Rear tire condition: 80 - 100% Side shifter 20/40 hydraulic spreader Full cabin

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 12-032-SP, total width: 1,900 mm, total length: 17,370 mm, total height: 850 mm, Linear folding and gluing machine equipped with 4 electronically adjustable glue guns for gluing 4/6-corner boxes (ERO). Chsdpfx Akozin Hhjnec

Condition: used, Year of construction: 2004, Overview Chjdpfxeyb Sa De Aknoc This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Csdpex S Uuyjfx Aknohc Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, We are pleased to offer you the following machine, subject to its availability: PETRATTO METRO SD 78 - 2007 Equipment: • FEEDER SECTION: o Friction feeder for thicker paper o Flat pile feeder for thinner paper (envelopes, etc.) • Metro 78 FOLDING AND GLUING UNIT - Metro transport system with 4 programmable outputs - Small plough folder, left and right - Large plough folder, left and right - Folding buckle plate - Folding buckle plate for thinner papers - Turning device - Stream belt delivery with pressure roller • Double-sided adhesive tape applicators x 3 Refurbished, with new rollers, bearings, and belts AVAILABLE: IMMEDIATELY Chedey Eda Sepfx Aknsc LOCATION: Belgrade, Serbia Installed in Belgrade, Serbia. Testing possible.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1044951, Size 90 cm, straight line, lock bottom, 6 feeder belts, vibrator on feeder, pre-fold station, final fold station Codpfx Akeyx Trdsnohc

Year of construction: 2011, condition: used, Card gluer Kolbus KK 841 Year: 2011 Hotmelt glue unit: Nordson Problue 4 Compatable with Kolbus gatherer: ZU 841.B Chodpfx Akeyyb Sbonsc

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm Csdpeyg Edgefx Aknohc 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: good (used), Year of construction: 2006, functionality: fully functional, FERAG TRL - TRI-LINER for affixing cards and discount coupons to chain-guided printed products Cjdpfx Aew Ud Ndoknohc

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, Equipment: CE marking, type plate available, Heidelberg Diana 90 AUTOSET – Refurbished Folder Gluer / Folding Carton Gluing Machine ✅ Condition: Fully refurbished in 2024 (complete mechanical and electrical overhaul, new motors, shafts, rollers, and control electronics) ✅ Functions: Straight-line, crash-lock bottom, 4-corner box gluing ✅ Speed: up to 500 m/min ✅ Formats: Diana 45 → 48–570 mm | Diana 90 → 48–900 mm ✅ Automation: Motorized carriers, AUTOSET feature, touchscreen operation ⚙️ Advanced Features - Precision aligning module for perfect folding - Feeder and transfer sections equipped with independent drive motors - Pneumatically lifted feeder top for easy access - LPS Clamping System for rapid module setup - Glue system with LPS GP AUTO (maintains glue freshness during stops) - Drive system: IE3 motors, ABB frequency inverters, Siemens PLC control - Final fold station design inspired by Bobst Alpina Codpfx Aovy Efyoknjhc 🚀 Why choose LPS Diana? ✔️ High efficiency – quick job changeovers with Autoset ✔️ Versatile – accommodates a wide range of carton types ✔️ Premium build – robust frame for stability and vibration-free operation ✔️ Remote diagnostics and service capability 🏭 Additional Machines Available from Stock We are a company specializing in full mechanical and electrical refurbishment of folder gluers (Heidelberg Diana, Bobst Alpina). We deliver machines with new modules, including our proprietary semi pick-up delivery table system. Currently available refurbished folder gluers, nearly ready for delivery: - Diana 90 Crashlock 4/6 Corner – €120,000 - Diana 90 – €100,000 - Diana 45 – €100,000 👉 All machines are fully rebuilt and include: - New shafts and bearings - New electrical cabinets with ABB and Siemens components - Comprehensive mechanical and electrical overhaul Prices are negotiable depending on configuration and customer requirements.

Condition: good (used), CMP PRESS consisting of: 1. Hydraulic platform for loading coating 2. Automatic vacuum loader Mod. Inde 2700 3. Glue spreader with 4 rollers, length 2800 4. Hydraulic platform for internal longitudinal loading 5. Roller unloader for coating machine 6. Composition belt in vipla for sheet lamination 7. Composition belt 8. Belt with band for the composition of multilayers 9. Composition belt for the formation of panels 10. Accumulation belt 11. Loading belt with pusher for inserting panels into the loader 12. Press magazine with 12 compartments - Tablet loading - Stops - Hydraulic lifting 13. CMP press with 12 compartments - Width 1950 - Length 2700 - Pressure cylinders from above - 9 pressure cylinders Chjdpfx Akovnth Sjnec - Opening cylinders 14. CMP unloader with 12 compartments - Luggage rack - Conveyor belt 15. Hydraulic platform for unloading panels 16. Hydraulic unit 17. Control panels and electrical control

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Chodpjukkvnjfx Aknoc

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Transport system Müller Martini 3520 Year: 2008 Cedpfx Ajy R Ty Ejknohc - Transport system, length (approx): 8 mtr Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Csdpfxozku Rpj Aknohc Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 7,000 kg, lifting height: 5,400 mm, fuel type: diesel, mast type: duplex, power: 116 kW (157.72 HP), empty load weight: 20,000 kg, drive type: Diesel, Empty container handler Load centre: 1219 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Cedpszx H E Ujfx Aknshc Front tyre size: 12.00-20 Rear tyre size: 12.00-20 Elme type 555 10ft–20ft spreader

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment Cjdpfx Akezk Nmronshc - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges Csdpfx Asb Sgzdjknohc -with 2 motors for cleaning from above and below -with oscillation -Swivelable - laterally adjustable Height: adjustable Quantity: 1 piece available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, actuation type: electric, total height: 1,500 mm, total length: 3,200 mm, total width: 1,100 mm, overall weight: 650 kg, Equipment: CE marking, documentation/manual, – Made in Italy – Year of manufacture: 2018 – Preliminary milling – Technical documentation, CE marking TECHNICAL SPECIFICATIONS: – Edge thickness: 0.5 - 3 mm – Wood veneer thickness: 0.5 - 5 mm – Element height: 8 - 50 mm Cedpfjzzzr Iex Aknshc – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed rate: 7 m/min – Operating temperature: 190° - 220° – Preliminary milling – Glue application roller – Guillotine for preliminary edge trimming – Saws for final edge trimming (front/rear) – Milling (top/bottom) – Radius edging – Straight edging – Polishing units – Air blow for each unit – Operating pressure: 6 - 8 bar – Table height from base: 900 mm – Nozzle diameter: 2x 60 mm and 2x 80 mm – Transport dimensions (L/W/H): 320 / 90 / 150 cm – Weight: ~650 kg

Condition: good (used), PTO shaft, drive shaft -Capacity: 1 3/8" 6 teeth (Ø 35 mm) -Length: 80-100 cm -They are suitable for fertilizer spreaders, field sprayers, band or circular saws, forestry winches, log splitters, hay turners, rotary rakes, loader wagons and many other implements. -Number: 10x PTO shafts available Codpsb A Niyjfx Aknohc -Price: per piece -Weight: 16 kg/piece

Condition: excellent (used), functionality: fully functional, mileage: 60,887 km, power: 75 kW (101.97 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 2,830 kg, maximum load weight: 170 kg, overall weight: 3,500 kg, axle configuration: 4x4, next inspection (TÜV): 10/2026, fuel: diesel, gearing type: mechanical, suspension: steel-air, number of seats: 2, Year of construction: 2011, Equipment: full service history, Hako M30 / Multicar / Salt Spreader / 3-Way Tipper / Snow Plow / 4x4 • Manufacturer: Hako • Type: M30 • Mileage: 60,887 km • First Registration: 12/12/2011 • Power: 75 kW / 101 hp • Transmission: Manual • Wheel Formula: 4x4 All-Wheel Drive • Front and Rear Hydraulics • Mounting Plate • Snow Plow • 3-Way Tipper • Salt Spreader Chjdpez A Dlkjfx Aknoc • Trailer Hitch • Tires: 225/75R16 C 121/120N • TÜV (Technical Inspection): Oct. 2026 • Euro Emission Standard: EEV • Unladen Weight: 2830 kg • Payload: 170 kg • Permissible Total Weight: 3500 kg • German Vehicle • German Documents • Immediately Ready for Use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical errors not excluded. - Sale subject to our general terms and conditions.

Condition: used, mileage: 50,324 km, power: 235 kW (319.51 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, ????? ONLY COMPLETE ????? ?????ONLY COMPLETE????? Vehicle No.: 254-26 Mercedes Benz 2632 Actros MP3 6x4 MULTISYSTEM: ROLL-OFF DUMP BED / CRANE / WINTER SERVICE SALT SPREADER Mounting plate SCHMIDT with hydraulic connections * First registration: 08/2013 * Original mileage 50,324 km * Wheelbase 4,500 mm * Front axle leaf spring suspension * Rear axle air suspension * Tire condition approx. 50-70% * EURO 5 - AdBlue * Reversing camera * Blind spot camera * Automatic transmission * German vehicle Roll-off dump bed: MEILLER RK 2067, built in 2013, max 20,000 kg, 300 bar CRANE / Roll-off container: MGK Type HLK 95a3, year of manufacture 2003, max 9.18 m = 960 kg / at 2.20 m = 4,200 kg Salt spreader / roll-off frame: KÜPPER WEISSER, Type IMSSF E35050DFA, year of manufacture 2015, KUBOTA engine Cover plate for brake discs, axle load front axle 9.0 t, battery 220 Ah, additional compressed air tank, electromagnetic viscous clutch for fan, noise reduction S-package for city use, urea tank (AdBlue): 95 liters, rear axle H 7, 13 t, bevel gear 300, fuel tank: 400 liters, air compressor 2-cylinder, fan high-speed belt drive, auxiliary drive MB 2C, programmable special module, pipe breakage protection brake system, rotating beacon left / right, reversing warning audible (warning signal outside), rear window, circuit breaker, seats in the cab: driver's seat sprung comfort seat, sun visor, cab socket 24V, oil cooler transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer coupling: towing coupling, trailer socket 24V / 15-pole, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, roof hatch (steel), differential lock rear axle, cab: suspension for bad roads (6.0 Hz), cab: M (medium length), generator 80 A, interior filter: pollen filter, body / superstructure: chassis, model revision from 06/2008, engine 12.0 L - 235 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, disc brake front axle, disc brake rear axle, steel rims 9.00x22.5, Telligent - gear shifting, underrun protection front, preparation CB radio, preparation telephone / fax, front axle angled, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 26.0 t Inspection possible during our opening hours at any time, test drive by appointment! In the case of export sales, a deposit will be retained, which will be refunded after receipt of the certificate of conformity. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. Cjdpfez Dcr Sox Aknshc All information without guarantee - Errors, changes, typing errors and prior sale reserved. Vehicle descriptions are explicitly not guaranteed properties. We refer to our general terms and conditions and ask that you take note of them.

Condition: good (used), Year of construction: 2011, operating hours: 8,239 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,700 kg, mileage: 8,239 km, TRIPLEX forklift, brand STILL Year of manufacture: 2011 Capacity: 3,000 kg Lifting height: 5,390 mm Chsdpfx Ajzaaw Ioknoc Equipped with a FREELIFT Equipped with a SIDESHIFT and FORK SPREADER Mast height: 2,500 mm 8,239 hours on the meter Battery replaced in 2021, equipped with an external charger and automatic filling system Video to follow.

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Cjdpsy Dr Hdefx Aknjhc Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: used, maximum load weight: 2,566 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 07/2024, loading space length: 6,060 mm, loading space width: 2,200 mm, loading space height: 2,270 mm, total width: 2,260 mm, total height: 930 mm, Errors and prior sale excepted! Internal number: A19. 4012342 ----EQUIPMENT * Trailer with high loading platform * Axle shock absorbers * 100 km/h approval * Removable aluminum sideboards * Removable corner posts * 2x loading ramps (2,500 mm) under the loading platform * Automatic support wheel * Drum brake system * Knott inertia brake unit * Wooden floor panel (screen-printed plywood in one piece) * 24x lashing hooks on the loading platform * Tarpaulin cover with spreader bar frame * Sliding tarpaulin on the left and right ... and more. ---- The vehicle is in original condition! Delivery throughout Germany is possible for an additional charge. Errors and prior sale excepted. Chjdpfezh Sl Sjx Aknjc We will gladly accept your vehicle as a trade-in. Financing/leasing is also possible without a down payment! Do you have any further questions? We will be happy to advise you!