Used Glue-Laminated Timber for sale (2,570)

Condition: as good as new (ex-display), Year of construction: 2024, Introduction JTFM-1100 fully automatic vertical Roll to Roll lamination machine is designed for waterbased glue and thermal Roll to Roll lamination multi-functions. It is our latest product, features high automation, high laminating speed, high accuracy, electrical appliance is centralized by programmable system, touch screen easy to operate. It can realize the whole line automation of unwinding, lamination and winding. Configuration & Functions: 1. Automatic High Speed Unwinder: Adopt shaftless clamping, hydraulic lifting structure, tension controlled by air brake automatically/manually. Standard Max. Unwinding diameter up to 1500mm. 2. High Accuracy Edge/Line Correction System: Equipped with Ultrasonic Edge Correction Sensor and upmarket Edge/line Position Controller, Photoelectric Tracking/ Stroke ±75mm, which can keep the edge of roller aligned when unwinding and winding. 3. Automatic Shutdown Protection System: Equipped with photoelectrically controlled automatic shutdown protection devices, in case of paper shortage, paper broken and paper jammed. 4. Drying And Heating System:The 800mm diameter large heating roller equipped with Electromagnetic Heating Device, at the same time supported with Hot Air Cycle System, can realize high speed booting and heating in 5~10 minutes, 2 times than traditional oil heating device meanwhile save Ksdpfx Aoxqrp Aefzowt much power consumption. 5. Automatic Hydraulic System: The hydraulic system automatically provides stable and large pressure to ensure high quality of lamination. Ruian Aote Packaging Machinery Co., Ltd. 6. Man-machine Interface System:Equipped with 10 inch color touch screen, easy and convenient to operate. The operator can view the machine's working status at any time from the touch screen. 7. Air Shaft and Tension Control System:Adopt air shaft, easy to load film, and paper roll, accurate position by the graduation of the air shaft. At the same time the intelligent tention system easy to control the tention of film and paper, increase laminating performance. 8. Rewinding System: AC vector frequency conversion control, matched with unwinding system, the paper roll lift is driven by double hydro-cylinder with torque adjustment system. Mirror pressing roller ensures that the paper roll is rewound tightly. Standard Max. Unwinding diameter up to 1500mm. Parameter: Model JTFM-1100 Max.Paper Width 1080mm Max.Unwinding Diameter 1500mm Max.Rewinding Diameter 1500mm Recommended Paper Thickness 100-500gsm Recommended Film Thickness 8~35 micron Max. Laminating Speed 100m/min Voltage 380V 50HZ Total Power 75KW Working Power 20~35KW Regular Lamination Pressure 5~15Mpa Regular Coating Glue Amount 3~8g/m^2 Dimension (L*W*H) 9000×3230×2600mm Total Weight 8500 KG

Condition: ready for operation (used), Glue application unit with 2 rollers - Glue specification for package height 300mm using 1 application roller and 1 dosing roller - 1 x left - 1 x right Kodsht Rtaspfx Afzowt - Suitable for DIMTER HK 200 + HK 400 + HK 800 + HK 1000 Spare parts Dimter Accessories dimmer

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms Kwsdpfx Asd Dcmqjfzjt around the glued board slats in the mechanical press offset free to press. (instead of using a big hammer or big weights on the crane hook)

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm planing shafts with strip knives immediately ready for use Kwsdpfx Afshuthyezjt

Condition: used, Year of construction: 2004, Overview  The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details  Output: 16,000 - 20,000 bph Formats:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line Kjdpfx Asxb A Idjfzewt

Condition: used, Year of construction: 2011, Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data  Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) Container type: glass, transparent Container diameter: 59-67.5 mm Container height: 226-260 mm Closure material: metallic, closure diameter: 28 mm Belt height: 1000 mm Electrical connection: 400 V, 50 Hz Max. Ambient temperature: 40 °C Device diameter container carousel: 1150 mm Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection Special feature: Processing of NRW bottles with neck film Scope of Delivery  HEUFT Tornado W incl. 2 cold glue stations Spectrum TX control system 6 format parts Without domino laser, vacuum cleaner and glue pumps   Kwedpfxswz Evys Afzjt

Condition: used, Year of construction: 2006, Laminating machine TPM Katana 106 Year of manufacture 2006, approx. 36,000 operating hours For thermal and wet lamination Technical details and equipment: Max. sheet format: 106 x 165 cm Min. sheet format: 44 x 63 cm Feeder: Mabeg Extras: De-powdering and brushing device Laminating unit with drying drum and separate laminating calender. Large counterpressure roller for increased laminating pressure, 2-stage motor hydraulics Hot water heated cylinders (2 separate temperature control devices) 2-stage air jet drying (separately controllable) Ksdpsxdhq Aofx Afzjwt Sheet separator with flying knife (cross cutter) and short cut for OPP film Stacker with sheet deformation and stop rollers Central control and operation (Siemens control system / with Profibus) The system has been regularly serviced by the manufacturer and is fully functional.

Condition: new, Year of construction: 2025, Various glue tanks for edge banding and squaring edge banding machines. Kwsdpfxof Tc Rqs Afzot We supply new glue tanks or overhaul your used one. We also sell single spare parts. Scm, Stefani, Idm, Ima, Biesse

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Kwjdpfoxap Axjx Afzot

Condition: excellent (used), COMEXI NEXUS DUAL HP laminating machine from 2006, 1300 mm working width Kwjdpsxmfg Tjfx Afzst

Condition: used, Year of construction: 2014, Glue unit Meler PUR Year: 2014 Suitable for connection with, Kolbus KM 473 PUR spine glue unit Kjdpfeuliqyjx Afzewt Premelter for spine glue unit

Condition: used, Year of construction: 2020, Hotmelt spine glue unit Muller Martini Kwedpfouliq Tox Afzet Year: Suitable for connection with a Muller Martini Vareo .

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Automatic suction feeder Kedpfxsxtxd Ss Afzjwt Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs

Condition: new, empty load weight: 6,180 kg, maximum load weight: 32,320 kg, overall weight: 38,500 kg, axle configuration: 3 axles, total length: 25,500 mm, total height: 119,400 mm, suspension: air, front tire size: 385/65 R22.5, rear tire size: 385/65 R22.5, Equipment: ABS, MEGA 3-axle timber / log trailer | Permissible total weight: 38,500 kg | Unladen weight: 6,180 kg | Payload: approx. 32,320 kg | Length: 11,940 mm | Width: 2,550 mm | 3rd axle: lift axle | Tyre size: 385/65 R22.5 | Aluminium side guard and toolbox | Air suspension and disc brakes | Loading length: approx. 11.94 m | Stake height: approx. 2.50–2.60 m | Subject to errors, input mistakes and prior sale Kwsdpfsxdfcijx Afzet

Condition: good (used), Year of construction: 1995, Stock drum bucket + press belt Type: SFAM 712_G Year: 1995 Max. size: 1650mm Kwodeu Ucluspfx Afzot Press belt Tünkers

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties. Kwsdpfjtru Hzox Afzjt

Condition: like new (used), Year of construction: 2016, functionality: fully functional, working width: 2,050 mm, Stock laminating machine Type: A-14R55A6L7N8N/2050P Year 2016 Max. size: 2050 x 2050 mm Min. size: 500 x 500 mm Print sheet thickness: 100-800 gr. Tolerance: +/- 0,5mm Carrier sheet thickness: Cardboard from 350 gr. (0.5 mm upwards) Corrugated board up to 7.0 mm Solid board up to 2.5 mm - Flush laminating machine Kjdpfxjuwntre Afzswt - Pile turner

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total length: 2,700 mm, total width: 1,200 mm, working width: 530 mm, Industrial machine lamination for offset and digital, simultaneous front & back laminating. The machine is equipment with Heidelberg vacuum feed. New equipment ! Equipment has not been used for work but only for initial testing/installation. Laminating machine to be perfectly adapted for both offset printing and digital printing with dry toner. Maximum speed: 25 m/min (working speed is variable depending on several factors: paper/cardboard substrate, the type and quality of the laminating foil and the type of printing (offset, ink, laser or digital). It can laminate one side or both sides in one pass, working speed up to 25 m/min can be achieved even in double-sided mode. - Maximum average size 53 X 100 cm; - minimum dimensions width 30 cm X length 20 cm; - average thickness between 115 gsm and 600 gsm; Full option equipment: - automatically overlaps and separates plasticised sheets, - allows adjustment of pneumatic pressure between the rolls and can work in heavy duty mode in case of large runs such as packaging. - can laminate even plastic window packaging with non-adhesive rollers (2 non-adhesive rollers); - the way to apply metal foil and achieve selective lacquer effect; - adjustable hydraulic pressure; - Hilderberg vacuum feed from 54 cm high stack and automatic lift and 6 bar 130 l/min external compressor; - jogger for receiving laminated sheets, with 10 cm stack; - equipped with 2 pneumatic axles for fixing the laminating roll; - equipped with 2 pairs of press rollers for front/back lamination; - accepts 3000 m rolls, foil between 24 and 31 microns; Kedpjmcw T Tofx Afzewt - BOPP film accepted between 23 and 42 microns, Nylon maximum 35 microns, PET maximum 35 microns (regardless of film producer); - longitudinal slitting knife; - longitudinal perforating knife; Floor area 120 x 270 cm Power supply: 3-phase, 400V AC, 50-60 Hz Power consumption: 7,500 W The machine is equipped with the following options: 2 non-stick cylinders 2 pneumatic axles for fixing the rolling roll 2 pairs of press rolls for double-sided lamination FOILER - unit for foiling and laminating with UV selective varnishing effect Jogger for receiving laminated sheets Large format module (max.53x100cm) Negociable price EXW - old price 49.000 - new price 30.000 euro + VAT (without VAT in EU).

Condition: used, overall weight: 3,850 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2026, loading space volume: 77.5 m³, total length: 25,500 mm, total height: 119,400 mm, suspension: air, maximum speed: 100 km/h, front tire size: 385/65 R22.5, rear tire size: 385/65 R22.5, Equipment: ABS, MEGA 3-axle timber / roundwood trailer. Permissible total weight: 38,500 kg. Unladen weight: 6,150 kg. Payload: approx. 32,350 kg. Length: 11,940 mm. Width: 2,550 mm. Axles: 3 x 9,000 kg (Haldex brake system). Tire size: 385/65 R22.5. Sturdy stake construction for secure timber transport. Aluminum side guard and toolbox. Air suspension and disc brakes. Kodpfew Nqv Hsx Afzjwt

Condition: used, Year of construction: 2009, Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 12.000 bph Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around  Label material: OPP with hot melt Machine drive: Siemens S7 Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L Kodew En Uyepfx Afzewt

Condition: used, Year of construction: 2009, Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 12.000 bph Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around  Label material: OPP with hot melt Machine drive: Siemens S7 Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L Kwedpfxjw En Uto Afzst

Condition: used, Year of construction: 2005, Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Capacity: 6,000 bph at 1L bottles Number of aggregates: 2 Accessories: Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck Various spare parts included Kwedjl Hxzvepfx Afzot

Condition: used, Year of construction: 2013, Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps. Kwodpfx Aforb Stmszot

Condition: used, Year of construction: 2005, Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle plates: 42 Bottle rotation in carousel: Mechanical Guide star diameter: 690 mm Labelling stations: 2 x Cold glue labelling stations 8 glue pallets 9 gripper positions Automatic magazine feeding Scope of Delivery  1 x Labelling Machine | HEUFT | TORNADO | 2005 Including: 2 x Integrated Laser Coders | Bluhm Complete labelling setup with format parts for 11 bottle formats Cold glue stations, glue pallets, gripper arms, and automatic magazine Technical documentation Kedpfxswd Uk Sj Afzewt

Condition: used, Year of construction: 2004, Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to left Scope of Delivery  GERNEP Labetta 4/3/12 784 2A 3SK labelling machine Integrated control unit (Siemens S7-200 with Touch TD) Machine safety housing with hinged and lift doors   Kedpfx Aewh U D Tjfzowt