Used Granulate Dryer for sale (2,380)

Condition: new, Year of construction: 2025, combustion chamber power: 175 kW Ljdsi Hplrjpfx Afieai Working power: 140 kW Diameter smoke outlet: 200 mm Hot air delivery pipes: 1 x 500mm Firebox length: 950 mm Firing chamber width: 600 mm Firebox height: 860 mm Air delivery : 8900 m³/h Power consumption : 3500 W designed for room volume : 3000 m³ area to be heated: 500/600 m² furnace height without hot air conveying pipes: 2200 mm Furnace width: 930 mm Furnace length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 750 mm, overall weight: 460 kg, warranty duration: 24 months, tank capacity: 90 l, water tank capacity: 90 l, battery voltage: 24 V, noise level: 69 dB, We offer a new Ride-On Scrubber-Dryer B 90 R Classic Bp with D75 Disc Brush Head for sale. All equipment purchased from us is covered by a 24-month WARRANTY. Technical specification: • Drive type: Battery powered • Traction drive: Traction motor • Working width (brushes): 750 mm • Working width (suction): 940 mm • Water tank capacity (clean/dirty): 90/90 l • Battery voltage: 24 V • Maximum battery run time: 3.5 h • Brush pressure: 20 – 315 / 28 – 37 g/cm² / kg • Water consumption: 3.5 l/min • Sound pressure level: 69 dB(A) • Rated power: 2200 W • Permissible total weight: 460 kg • Dimensions (L x W x H): 1450 x 800 x 1200 mm Equipment included: • 6V 180Ah Gel Batteries x4 Laedpjwz Nz Tofx Afiei • Squeegee bar • 2x Red disc brushes • Battery charger A working width of 750 mm ensures high performance and effective cleaning of large areas in less time. The control panel is clear and user-friendly, making daily operation intuitive even for new users. A 90-liter tank allows a large amount of cleaning solution to be loaded at once, minimizing the need for frequent refilling. Thanks to its compact design, the device offers excellent maneuverability—the small turning radius enables efficient operation even in narrow corridors and confined spaces.

Year of construction: 2023, condition: new, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that Lajdpfeixldvox Afiei removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more

Condition: used, Year of construction: 2009, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 4007342, pressure dew point: 3 °C, pressure (max.): 14 bar, Equipment: type plate available, Beko Drypoint RA 120, for collection, location Hildesheim 31137, still connected, test run possible Ledow Slhpopfx Afijai

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 6,370 mm, total length: 2,150 mm, total height: 2,300 mm, overall weight: 4,800 kg, 340cm sticky belt printer equipped with 8 NEW Kyocera print heads, printer condition like new. In operational status Ledpfxsxvb Ufs Afijai

Year of construction: 2014, condition: ready for operation (used), A Büchi laboratory spray dryer is available. Evaporation capacity: 1l/h, heating power: 2300W, max. inlet temperature: 220°C, air flow rate: 35m³/h, spray gas flow rate: 200l-800l/h, pressure: 5bar-8bar. Machine dimensions X/Y/Z: approx. 650mm/700mm/1100mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Lajdpfx Aoxvrucsfiei

Condition: good (used), Year of construction: 1999, Refrigeration dryer Lsdpfx Afsttwzboieai Manufacturer: KAESER Type: TE 121 Year of manufacture: 1999 Rated motor power: 2.1 kW Serviced by Kaeser.

Condition: good (used), Mouth width: 150x80mm Ljdofhnv Iepfx Afieai 2 rotor blades (95mm)

Condition: ready for operation (used), Heidelberg KORS 52X72 grey body with long panel EMA DRYER Ljdpfx Afoxygd Toijai

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm Lajdevcb U Aepfx Afioi -Volume: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder -Connected load: 29 kW -6 mesh shelves included, as well as V2A support brackets -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven

Condition: excellent (used), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 11-270D (5 to 13 bar) include Dryer with time controlled drain include 2 air filters include 270 liter tank include controller Air Control Base Year of construction: 2025 Operatin hours: 5 Technical specifications Lajdjw Duytjpfx Afiji Type: Combi XP 11-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.30 to 2.00 m³/min at 6 bar (g): 0.30 to 1.89 m³/min at 7 bar (g) : 0.30 to 1.78 m³/min at 8 bar (g) : 0.29 to 1.67 m³/min at 9 bar (g) : 0.29 to 1.57 m³/min at 10 bar (g) : 0.29 to 1.46 m³/min at 11 bar (g) : 0.28 to 1.36 m³/min at 12 bar (g) : 0.28 to 1.24 m³/min at 13 bar (g) : 0.27 to 1.17 m³/min Nominal power drive motor: 11 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/60-315/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Weight: 590 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2016, Power: 11 kW (15 HP) // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) – Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% – 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L – EN 1.4404 Lasdpoxn Az Refx Afisi Vacuum seals: PTFE and FEP Jacket material: AISI 304 – EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit – AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar – Jacket temperature: 142°C – Surface area: 1.65 m² Cooler, mounted on the heater: cold water or brine – Pipe jacket pressure: 12 barg – Jacket temperature: 142°C – Pipe temperature: -10°C /+ 99°C – Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Dip drawing system with integrated paint dryer - Manufacturer: Delta Industrietechnik - Year of manufacture: 2015 Lodpjxvia Asfx Afisai

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. Lsdpfewp Rqfsx Afisai The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps Lodpfx Afsxn Nlvoieai - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. Lasdpfxeu Rpg Te Afiei for sale brand new dryer old stock (2019) includes two brand new filters. capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 tested and ready for use.

Condition: used, machine/vehicle number: 05-96, MASPELL DRYER TYPE PRESS M: Wood capacity: 1.6 m3 Hot water heating system, New heating element, Ledpfx Aoxuv Nnsfijai 5 plates of 1000 x 5000, Stainless steel chamber dimensions: 6000 x 1700 x 1000

Condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Lodpoxnc Nhefx Afijai Electrical cabinet

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Lsdpfxsfh Hahe Afioai Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available-

Condition: used, Year of construction: 2013, Compressed air refrigeration dryer Model: MG 110 Year of construction: 2013 Air volume flow 6,600 m³/h or 110.0 m³/min Laedpfju Rn Trjx Afiji Nominal power: 8.99 kW The air dryer is functional and was regularly serviced and checked until it was decommissioned

Condition: excellent (used), Year of construction: 2013, Screen printing dryer Acosgraf Infradryer TS3010 perfect for plastisol inks, quick curing 350-500 pieces an hour Low energy consumption year 2013 27kw air circulation Laodpfx Afextwtxsioi exhaust blower 3 different heating zones belt 100cm wide heat length 3 meters Très bon état

Condition: excellent (used), functionality: fully functional, Fully automatic AZO supply system for sale. Includes: Laodpsw Hx Aqefx Afisi - AZO air dryer - 6x granulate dryers (year of manufacture 2008–2017) - Air dehumidifier LE900 N - Return suction station - 8x Oktomat roller conveyors with suction units, each 6000 mm long - Busch vacuum pump - Complete control unit - 4x individual suction stations - Transfer station with bayonet lock Condition and equipment as shown in photos and videos. Please feel free to contact us at any time if you have any questions.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Ljdpfjl Sm N Tox Afioai Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: excellent (used), Screw compressor, compressor, compressed air unit, compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer Ljdpfx Afsxl Rxfsijai -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 -Volume flow: 520 l/min -Engine power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm -Total weight: 180 kg

Condition: excellent (used), Year of construction: 2013, KAESER TB19 compressed air refrigeration dryer, with energy-saving SECOTEC control system. Year of manufacture: 2013 Technical specifications: Flow rate: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Ledpfx Afjwmxb Tjioai Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Power supply: 230 V / 1 / 50 Hz Location: from stock, 54634 Bitburg - available immediately -