Used Graphite for sale (183)

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt Fgjdpfx Asxabf Eekvsb scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table Fgedpjxabkzefx Akvob - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm Fedpjxabp Djfx Akvsgb can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm Fjdpfjxwma Asx Akvegb CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Fodpfjvvlmcjx Akvsgb Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: excellent (used), Standing desk – lectern – high table and shelf. With slanted shelf in graphite grey: 480×570 cm. Fedpfx Aksym R Svsvjgb Total height: 110 cm Width: 52.5 cm Depth: 52.5 cm Additional shelf (74.5 cm × 74.5 cm). Height can be adjusted freely. 2 levels with short (8 cm high) elements 2 levels, each 23.5 cm high 1 level, 33.5 cm In very good condition, also suitable for use as a shelf. Scope as shown. Shipping possible (also disassembled).

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. Fedpfx Akjq Nw Uqevjgb 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Fgjdpfx Aksxn Rguovsb Electromotorized filter cleaning Device in very good condition. Warehouse No.: 1051

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price Fsdscr S Ecepfx Akvsgb

Condition: new, Year of construction: 2026, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Fgsdpfx Aeff Hdfokvob Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction Fgsdpfx Akelht H Nsvob suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Fgodpfx Aoff Hdbjkvsb Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Fgedpfxegf Sw Nj Akvsb Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, maximum load weight: 34,720 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 9,195 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 3-Axle Semi-Trailer LOGO 10X Fgjdpfxsrymwze Akvjb * Steel flat sheet cover welded over kingpin * Steel chequer plate cover welded at the rear * Electronic air suspension * 3 single axles, SAF brand, 9 t with disc brakes * 1st axle liftable * Manual landing gear * Bolsters: 6x ExTe D10 (position 4 with double pockets, position 5 with flat stanchion pockets and quick-release wedge system) * Stanchions: 8x ExTe D7 telescopic + 4x ExTe D10 telescopic * Tyres: 385/55 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tanks made of aluminium * 3x grab protection devices between the bolsters * Frame + bolsters in RAL 9011 graphite black * All add-on parts according to EU regulations Images may differ from the original. Information subject to change without notice. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 1,075 mm, Year of construction: 2026, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ59-L ALPHA * Only 3,100 kg tare weight * Air suspension * 2 single axles, make SAF, 9 t with disc brakes, including safety ropes * Tires: 275/70 R 22.5 on high-gloss aluminium rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple cable * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + footprint on drawbar * lateral collision protection according to ECE?R 73 * for the transportation of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * ExTe D7 stool, ExTe D7 EURO-C stanchions Fodpehnak Defx Akvegb Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Information without guarantee. Illustrations may differ from the original. DOLL lightweight construction: This DOLL 2-axle trailer stands for modern vehicle construction and efficient timber transportation. The trailer offers the proven DOLL quality - practical and safe. Contact Niclas Lott Tel:

Condition: used, mileage: 235,530 km, power: 324 kW (440.52 HP), first registration: 04/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: green, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2011, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ MAN TGS 28.440 6x2-2 BL Wiedemann SUPER 1000 – available by arrangement Internal Ref. #515 Chassis * MAN * TGS 26.440 * 6x2-2 BL * 440 HP / 324 kW * EURO 5 * MAN transmission * N-drive NMV 221 * 4,200 + 1,350 mm wheelbase * Front suspension: parabolic springs, 9.5 t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue * 385/55 R 22.5 steering axle, TL 160&K * 315/70 R 22.5 drive axle, TL 154/150&K * 385/55 R 22.5 steering axle, TL 160&K * Chassis color: RAL 9011 graphite black * Halogen beacon lights * 'M' cab, 2,240 mm wide, 1,880 mm long * Air conditioning * Reversing camera Body * Wiedemann enviro tec * Super 1000 8.0/4.0 water recycling system * 12,000-liter tank capacity * 4,000-liter water compartment * 8,000-liter dirty water compartment * Emptied by hydraulic tilting, 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h, 80 kW * Piping: DN 150 * approx. 25m suction hose DN 125 * Suction pipe DN 125 High-Pressure System Fedpswu Syxjfx Akvogb * Uraca P 3-45, 407 liters at 175 bar * High-pressure reel for approx. 180m DN 32 with automatic rewind * Hydraulic jetting hose reel with approx. 60m DN 13 Special Features * Sludge tank made of stainless steel 1.4301 * Suction and HP booms * Warm water hand-washing unit * Stainless steel toolbox * Control cabinet with display * NMV start can be activated from control cabinet * Remote control * Equipment cabinet with hatches * Hose tray * Pump compartment with soundproofing extended upward * LED work lights Technical Data * Unladen weight: 18,080 kg * GVW: 28,000 kg * Length: 10,900 mm * Height: 3,650 mm * Width: 2,550 mm For further details and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and error. The buyer is obliged to independently verify the condition and features of the goods. Sale exclusively according to our terms and conditions and without any warranty.

Condition: used, Opal Type: Opal 460 Opal 460 from ATM The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph samples. The process sequence is carried out automatically. Fgedpjvd Dlgjfx Akvob The fully automatic sliding shutter enables trouble-free opening and closing of the mounting area. and closing of the embedding area. Manufacturer ATM Q Ness GmbH Model OPAL 460 Functional principle: The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph specimens. During hot mounting, the specimen is embedded in a mounting press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding material (e.g. glass fiber reinforced) and the good freedom from splitting. Hot embedding agents are available based on epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Mounting of samples for better sample preparation for further metallographic examinations. Technical data: Press mold Ø 30 mm, Ø 50 mm Temperature range 20 ... 200 °C Max. Pressure 310 bar Weight ~ 40 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data) We will be happy to answer any further questions you may have on the phone.

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Flatbed truck and chassis, suitable for crane installation Chassis Color: Pure white RAL 9010 Cab Color: Graphite black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 HP) Torque: 2,400 Nm Emissions standard: Euro 6d Fjdpfjxwrblox Akvjgb Transmission MAN TipMatic 12-speed automatic Reinforced single-plate clutch (430 mm) Drive modes: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle distance (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame longitudinal member thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic level control Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (multi-stage) Disc brakes on all axles Electronic parking brake Tyres and Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, heated, with armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage boxes Interior styling: Moon Grey Sun blinds, tilting roof Various storage compartments USB ports LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Permissible trailer weight: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency braking assistant Lane departure warning Digital tachograph Advanced navigation system (7 inch) MAN SmartSelect Body Interface Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: Hydraulic front axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and special-purpose applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Color: RAL 3020 traffic red, cylinders black Slew Range Continuous rotation Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Kinematics Double linkage system with PROLINK Articulated arm can be over-extended up to 15° Overload Protection Electronic overload cut-off FX500 FSC stability control LMB II Emergency stop and visual warning Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at the base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency control Stabilizers Hydraulically extendable on both sides Stabilizer spread: 7.79 m Speed Control Dynamic Control

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Fgodpfxjhwhfue Akvob Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm Fgodeuhiq Dspfx Akvsb • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Flatbed truck and chassis, suitable for crane installation Chassis Color: Pure white RAL 9010 Cab Color: Graphite black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 HP) Torque: 2,400 Nm Emissions standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-plate clutch (430 mm) Drive modes: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle distance (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame longitudinal member thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic level control Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (multi-stage) Disc brakes on all axles Electronic parking brake Tyres and Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, heated, with armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage boxes Interior styling: Moon Grey Sun blinds, tilting roof Various storage compartments USB ports LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Permissible trailer weight: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency braking assistant Lane departure warning Digital tachograph Advanced navigation system (7 inch) MAN SmartSelect Body Interface Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features Fgedexwra Uopfx Akvob HydroDrive: Hydraulic front axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and special-purpose applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Color: RAL 3020 traffic red, cylinders black Slew Range Continuous rotation Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Kinematics Double linkage system with PROLINK Articulated arm can be over-extended up to 15° Overload Protection Electronic overload cut-off FX500 FSC stability control LMB II Emergency stop and visual warning Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at the base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency control Stabilizers Hydraulically extendable on both sides Stabilizer spread: 7.79 m Speed Control Dynamic Control

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Platform truck and chassis, suitable for crane installation Chassis Color: Pure White RAL 9010 Cab Color: Graphite Black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 hp) Torque: 2,400 Nm Emission Standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-disc clutch (430 mm) Driving Modes: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle spacing (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame rail thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic leveling control Spring load capacity: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (adjustable) Disc brakes on all axles Electronic parking brake Tyres & Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab Type: FN, flexible, narrow, standard height Fgsdpfx Aoxwra Iokveb Comfort seats: air-suspended, seat heating, armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage compartments Interior styling: Moon Grey Sun blinds, tilting roof Various storage solutions USB sockets LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Technical trailer load: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency brake assist Lane departure warning Digital tachograph Advanced navigation system (7-inch) MAN SmartSelect Body Interfaces Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: hydraulic front-axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and government applications as well as flexible body solutions ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Colour: RAL 3020 traffic red, cylinders black Slewing Range Infinitely rotatable Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Linkage System Double linkage system with PROLINK Articulated arm can be overextended up to 15° Overload Protection Electronic overload shutdown FX500 FSC stability control LMB II Emergency stop and visual alarm Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency operation Stabilizers Hydraulically extendable on both sides Support width: 7.79 m Speed Control Dynamic Control – load-dependent Additional Articulated Boom / Jib Type: L214 4x hydraulically extendable up to 10.30 m

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: Fgjdpjvupa Rsfx Akvob * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Fedpfxjvt Tn As Akvegb Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: Fedpfxsvunrfe Akvsgb - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg