Used Short Hobler for sale (4,017)

Condition: used, Year of construction: 2002, Used machine Equipment: - Constant working height due to a motor-driven, height-adjustable upper section - 1st sanding unit with a rubberized and grooved contact roller, contact roller with 180 mm diameter, 75ø shore, contact roller level adjustable in steps - 2nd sanding unit with a height-adjustable air sanding pad - Belt drive motor 15 kW, 380 volts, with soft start for low power consumption during startup - Parallel, spring-mounted, ground infeed pressure roller - Pneumatic belt tensioning with length compensation - Air-controlled sanding belt oscillation - Immediate stop of the sanding belt drive with disc brake in case of belt breakage, belt slippage, or pressure drop - Automatic star-delta contactor Chjdpfx Asz Iupweknjc - Thickness indicator for workpiece thickness - Workpiece feed 0.75 kW with a fabric-reinforced rubber conveyor belt - Automatic centering of the feed belt - Rubberized belt drive roller - Ammeter for monitoring the chip removal rate - Max. workpiece thickness 160 mm - Sanding belt dimensions 1120 x 2000 mm - CE version/dust-tested - Infeed roller table - Outfeed roller table - Feed speed continuously adjustable from 3-15 m/min via a frequency converter, control from the front at the operator side - Automatic workpiece thickness adjustment across the entire working width, including over-thickness protection - Adjustment or pre-selection of the chip removal rate via a dial gauge - ENORM-matic quick adjustment with feed release - Operating hour counter in the electrical cabinet Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. •Manufacturer: FMB •Model: SL 80 S Codpsz Eh Unofx Aknshc •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. Csdpfx Aoz Dvfxsknjhc TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Chjdsydqk Hepfx Aknsc for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2024, functionality: fully functional, This is a cutting machine manufactured by Scharfen, model ES 300, year of manufacture 2024. The machine has been inspected in our in-house workshop and is fully functional. This machine was an incorrect purchase; it turned out that a miter cutting machine was required. Therefore, it was only used for a short period. You will receive an invoice with VAT shown. The list price of the machine is €4,082 net / €4,857.58 gross. Our offer price is €2,932.77 net / €3,490 gross. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul / inspection & expert cleaning. Inspected & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 580 x 635 x 420 mm Blade: 300 mm diameter, hollow ground, hard chrome-plated stainless steel, long cutting life. Cutting thickness setting: 0-25 mm (infinitely adjustable) Cutting length: 250 mm Cutting height: 210 mm Noise level: less than 70 dB (A) Grinding device removable Voltage: 400 V three-phase or 230 V single-phase Power: 0.6 kW Weight: approx. 51 kg Serial number: 2241096 Year of manufacture: 2024 Csdpfsz Ilm Tox Aknohc Condition: used, inspected, fully functional Additional information: Large storage area for sheets Quick and easy to clean Extremely robust and low maintenance 100% stainless steel Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, Year of construction: 2020, Manure spreader with short disc harrow, Volmer T Rubber TRG-W8000, year of manufacture 2020, nominal width 7500 mm, 60 toothed discs 510 mm, 2x16 manure distributors Agrar Pro with 50 mm hose diameter, 10 bar pressure hoses, nitrogen bladder for spring mechanism, 3-point linkage, edge disc 430 mm, side plate on the right, pipe roller 550 mm, hydraulically foldable, warning sign with LED lighting, serial number 090804155. Chsdpfez Hwvkox Aknec

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: M.1501739, Equipment: documentation/manual, type plate available, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Cjdpfszcnkbex Aknshc For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, mileage: 246,649 km, power: 195 kW (265.13 HP), first registration: 08/2010, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, emission class: euro5, total width: 2,450 mm, total height: 3,120 mm, loading space volume: 6 m³, loading space length: 4,000 mm, loading space width: 2,380 mm, loading space height: 600 mm, Year of construction: 2010, Equipment: ABS, air conditioning, Renault Midlum 270 DXI Meiller three-way tipper VIN: 001286 Chassis / Components: * Leaf spring suspension * Wheelbase: 3,200 mm * Tires: 11R.22.5 * Remaining tread depth: Axle 1: 80% Axle 2: 80% * 1 x Diesel tank * 1 x Hydraulic tank Meiller * 1 x AdBlue tank * Fixed underrun protection * Hydraulic connection (trailer) Body: * Meiller three-way tipper * Load area: 4.00 m x 2.38 m x 0.60 m * Front wall: 0.80 m, side walls: 0.60 m * Tie-down points Cab / Cockpit * Day cab * Rear window / cabin rear wall * Air conditioning * Roof hatch * Radio CD * Cruise control Engine / Transmission * 195 kW / 270 hp // 7,146 cm³ // Euro 5EEV * Manual gearbox, 6 gears * Engine brake * Differential lock * Auxiliary drive Weights Chodpfx Akez Iuwzenjc * Gross vehicle weight 16,000 kg * Payload 9,270 kg * Unladen weight 6,730 kg Other * German vehicle * 1 previous owner * Valid inspection until 03/2027 * New inspection possible upon request New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sales and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly help you with the processing of customs matters.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, saw blade diameter: 400 mm, cutting range round steel at 45°: 130 mm, cutting range round steel at 90°: 130 mm, overall weight: 2,500 kg, cutting range square steel at 90°: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16, 2026, and November 26, 2026! The machine has been completely overhauled and repainted! TECHNICAL DETAILS Round material at 90°/45°: 130 mm Square material at 90°: 120 mm Profiles at 90°: 300 × 45 mm Profiles lying at 45°: 220 × 60 mm Profiles standing at 45°: 80 × 120 mm Saw blade: 400 × 4 × 50 mm Saw blade mount: 50/4 × 14/80 mm Saw motor: 3.7/4.5 kW Cutting speed: 1,750/3,500 m/min Saw blade feed: 0–3,700 mm/min Rapid return of saw blade: 4,500 mm/min Short-stroke clamping device stroke: 8 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,200 x 2,000 mm Weight: 2,500 kg EQUIPMENT Workpiece clamping with short-stroke clamping device Hand crank for pre-setting Horizontal clamping cylinder at the front Chodjz Il Hyjpfx Aknsc Minimum lubrication instead of a coolant mist spray system Feed roller track T3 Rollers of the feed roller track: 60 × 289 mm Starting section of the roller track, length 2,000 mm, with 5 rollers Stand for roller track Mounting bracket Extension of the roller track, length 2,000 mm, with 4 rollers Stop roller, adjustable as a guide for material bars Length measuring device Discharge roller track T3 External Reference: Steinbach & Holler - Lot 39

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disk laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disk laser technology and combine short pulses and high pulse energies, even at high frequencies. This allows you to remove layers and contaminants at maximum speed and reduce your cycle times. Further optimize your processes by varying the repetition rate – while maintaining a constant pulse duration. The short-pulse lasers of the TruMicro Series 7000 are the ideal tool for the efficient and economical cleaning of tire molds. Large-area applications with high average power Ablation, cleaning, annealing: The lasers of the TruMicro Series 7000 demonstrate their full potential in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous layer removal rates. A scanner ensures excellent power utilization. Flexible laser light cables transport the light to its intended destination and facilitate laser integration. Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System Input Power: 380–460 VAC, 3-phase Laser Power: 750 W Wavelength: 1030 nm Pulse Energy: 80 mJ Pulse Duration: 30 ns Beam Quality: 20 mm Repetition Rate: 5 to 100 kHz Fiber Diameter: 400 µm Cjdpfxexaktle Aknohc IP Rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2016, operating hours: 23,500 h, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, total length: 7,500 mm, total height: 2,500 mm, total width: 1,600 mm, number of spindles: 2, Equipment: documentation/manual, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Center Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as conversion kit to long turning center (Swisstype kit) for short and long turning on one machine. Delivery conditions: Free on truck. Location: 58332 Schwelm Availability: Immediate - by arrangement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; the exact date will be provided in advance! Payment terms: Payment in advance - by bank transfer. Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW COUNTER SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Diameter of tool holder: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Diameter of tool holder: 25 mm Scope of supply: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & weights: Codpfx Aezxhdleknjhc Installation dimensions L x W x H approx.: 7500 x 1600 x 2500 mm Weight approx.: 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold excluding any warranty. ►Technical data is without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Codpfxozuzi Te Aknehc Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: good (used), KLOPP H 1000 – Planing machine Chjdpfx Akezfv Nvensc - Planing length approx. 1000 mm - Planing width approx. 750 mm - Automatic feed - Work table extension Dimensions: L x W x H 3.4 x 1.5 x 1.7 meters / Weight 3800 kg Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Chsdpfx Akezrhhwsnoc

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into Chedpfxsz Ipl Hs Aknec • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Year of construction: 2021, condition: used, functionality: fully functional, This is a Hobart Premax AUPT-10B double-basket hood-type dishwasher, manufactured in 2021. It includes a matching supply and drain table. First commissioning: 07/11/2023 / Operating hours: 1450 / Washing cycles: 30008 This premium double-basket hood-type dishwasher offers double the capacity for simultaneously washing two baskets. The PERMANENT-CLEAN dirt removal system removes coarse dirt into an external filter. This saves operating costs and protects the machine. To ensure that hygienic final rinse temperatures are reached even when connected to a cold water supply, the machine has an automatic program time extension. For corner installations, we recommend that the right side of the machine is accessible for maintenance. We recommend water treatment for water hardness of 1°dH or higher. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. The original list price of the machine with this equipment at the time of purchase was: €37,570.00 (gross). Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1345 x 915 x 1510 mm (+200 mm PERMANENT CLEAN system) Supply/drain table each 1200 mm Height with hood open: approx. 1995 mm Power connection: V: 400 / kW: 22.5 / A: 36.1 / Hz: 50 Weight: 252 Serial number: 867206655 Chodpfx Akszmttusnjc Year of manufacture: 2021 Condition: used, major inspection carried out, fully functional. Further information: Basket size: 500 x 500 mm Tank capacity approx. 80 liters Water consumption approx. 1.4 L/basket Insertion height 440 mm Capacity up to max. 140 baskets/h, 2520 plates/h, 5040 glasses/h 8 automatic programs: Short, Standard, Intensive, Eco, Continuous wash, Cutlery, Hygiene and Heavy-duty programs. Program duration: 52/70/170/180 sec. and special programs Heat and sound insulated hood Multi-setting: The heating capacity can be reduced on-site from 12.4 kW to 6.2 kW when connected to a hot water supply. Self-cleaning program Filter contamination sensor USB interface for exporting operating and hygiene data Completely ready for connection: Supply and drain hoses, connection cable, liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Hood, tank, frame, wash arms and housing made of CrNi steel 1.4301 4 plate baskets P-18-12, 1 universal basket C-01-07 Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Chjdpfx Asz Ipwceknec Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2019. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Codszvv Dzopfx Aknshc Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: used, Year of construction: 1989, operating hours: 8,341 h, 1989 | Atlas Copco QAS-85 | Used Generator Set | 8341 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 17 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ Chsdpfx Akoz Ebuujnoc 📌 Inspector's Comment: Good overall condition. Caution, 1989 machine without CE marking and without sockets equipped with protection against overloads, short-circuits, or leakage currents. Plan connection on the busbar set. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41430 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Csdjz Dyfcjpfx Aknohc Saw blade diameter: 250-550 mm Maximum cutting height: 200 mm Saw blade spindle: 30 mm Undertable extraction: 120 mm Parallel fence with fine adjustment Fence ruler length: 1200 mm, can be swiveled Extension table: 1250 x 650 mm Cutting length: 2800/3200 mm Crosscut fence: 3200 mm, can be swiveled 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, automatic cutting height correction during swiveling. 3-line LED display for height, angle and speed SD Circular saw table extension up to 1620 mm behind the saw axis, aluminum anodized On/off switch on the sliding table Panel saw sliding table: 3200 mm, anodized Swiveling mechanism for extension table Cutting width: 1250 mm Upper guard cutting width: 1250 mm Extraction connection: 100 mm Electrical system: Kappa 550, 3x400V 50Hz CE, 10 kW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick overview Location: Flörsheim Availability: short notice

Condition: used, mileage: 521,378 km, power: 324 kW (440.52 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Equipment: air conditioning, MAN 18.440 TGS LL Low Liner * Registered: 09.2015 * ZF Intarder * Tires with approximately 60-80% tread * Air conditioning * Short cab Cedez Iuqzjpfx Aknshc * German vehicle in top condition

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Chodpfx Aey Avl Isknec Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque Chjdpfx Asz Ipnzoknjc • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: used, Year of construction: 2017, functionality: fully functional, X-axis (planar travel): 195 mm (approx. 7.67 inches) Z-axis (longitudinal travel): 400–430 mm Tailstock travel / quill travel: 100 mm (quill stroke) Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min C-axis (spindle indexing): 0.001° (for driven tools / MC version) Chodpfx Akez Hwaijnec Center height: 1,000 mm Max. spindle speed: 3,500 rpm Max. chuck diameter: 10 inches Max. chuck speed: 4,200 rpm Max. working area (diameter x length): Ø 325 mm x 302 mm Machine weight: 4,350 kg Operating voltage: 3 PE / 220 V (AC) Rated frequency: 50 Hz Electrical connections / power: 30 kVA Rated current: 100 A Short-circuit current strength: 5 kA Largest motor: 80 A Circuit breaker capacity: 100 A Switching capacity of protective device: 50 kA Compressed air supply: 0.5 MPa (5 bar)

Condition: used, mileage: 400,000 km, power: 181 kW (246.09 HP), first registration: 10/2013, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, total length: 26,000 mm, total width: 33,900 mm, loading space length: 8,020 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, Year of construction: 2013, Equipment: ABS, air conditioning, tail-lift, * Advertisement/Vehicle No.: MTG39 * Office: * WhatsApp: * Mobile: * E-mail: * Website: Rental of various trucks + semi-trailer trucks + trailers for short or long-term rental, 7.5 tons from €699.00 and 18 tons from €1,000.00 per month, available on short notice! Please contact us. 1x Volvo box van, 21 Euro pallet volume Year of manufacture: 2010-2013 * Chassis number: DB6XXX * Mileage: 397,275 km * Manual transmission * Euro 5 with green emissions sticker * Tail lift Zepro 1.5t, ZHD 1500-155 MA * Leaf spring/air suspension * Loading area length 8m / internal height: 2m / internal width: 2.50m * Radio * Tires: 265/70 R19.5 front and rear * German vehicle Net price - trade-in possible - Rental/financing/leasing brokerage - Changes, prior sale, typos and errors excepted! We only deal with well-maintained German vehicles. Our services: all customs/export documents, Euro 1 * Short-term registration / 5 days Codpfxezahy Rj Aknjhc * Customs registration / 30 days * Vehicle delivery * Vehicle collection * Main inspection and safety check Our contact details and opening hours: Office: * WhatsApp: * Mobile: * E-mail: * Website: * Monday - Friday: 9:00 a.m. - 6:00 p.m. * Saturday: by appointment