Used Gx 11 Ff for sale (16,185)

Condition: ready for operation (used), Newport INFCT-11 thermocouple controller, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpsdoi Eb Uiepfx Al Uon

Condition: excellent (used), Year of construction: 2021, operating hours: 1,926 h, variable screw compressor ALMIG F-DRIVE 8 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2021 Operating hours: 1926 Bh Technical specifications Type: F-Drive 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0,16 to 1,32 m³/min at 6 bar (g): 0,20 to 1,27 m³/min at 7 bar (g) : 0,23 to 1,21 m³/min at 8 bar (g) : 0,27 to 1,16 m³/min at 9 bar (g) : 0,27 to 1,11 m³/min at 10 bar (g) : 0,31 to 1,05 m³/min at 11 bar (g) : 0,31 to 0,99 m³/min at 12 bar (g) : 0,33 to 0,95 m³/min at 13 bar (g) : 0,38 to 0,89 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 660 mm Width: 690 mm Height: 1586 mm Weight: 356 kg Visit our store. Fpedpfjuz T N Hsx Al Uon We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, diameter / mm Cutting (quantity) / weight / kg Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new Fpedpeu Dbz Aofx Al Usn incl. test report

Condition: good (used), geared motor, electric motor -Speed: 25 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 Fjdpfx Asb A Rnqel Ujpn -Weight: 14 kg

Condition: good (used), geared motor, electric motor Fpodeb A Rnwspfx Al Ujn -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 20 kg

Condition: used, machine/vehicle number: 5737, Year of construction: 1991, operating hours: 6,587 h, Erstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle AngabenErstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Fpodpszcbngjfx Al Ujn Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, siemens 810 Control, 24 Station ATC, Spindle power 15Kw, 10,000rpm, BT40 Spindle, Coolant, Fpedozg Enkopfx Al Usn

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Fpodpfx Aljzv Egle Usn Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Fjdpfx Aozwdn Dol Uepn -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: new, Year of construction: 2026, The CORMAK 150-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Advantages of the 150 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. Fsdpszwlm Usfx Al Ujpn The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 150-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 270-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Fjdjzwl H Iopfx Al Uopn Key Features of the 270 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 270-litre capacity – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 5 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 270-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 92 kg Number of connections 5 Connection sizes 1 1/4", 2", 1/2" Dimensions 1825 × 500 mm Tank capacity 270 L Working pressure 11 bar Wall thickness 4 mm Diameter Ø 500 mm Height 1825 mm

Condition: refurbished (used), Used AGTOS three-phase motor with 11 kW power, flanged design. The motor was overhauled and tested in March 2026. Manufacturer: AGTOS Type: 1PC38041DA234CT0 Motor number: 15/253398/7 Motor type: Three-phase motor Power: 11 kW Rated speed: 2955 rpm Rated voltage: 400 / 690 V Rated current: 19.6 / 11.3 A Frequency: 50 Hz Power factor cos φ: 0.89 Rated efficiency: 91.2 % Efficiency class: IE3 Fpodpozuf U Hofx Al Usn Frame size: 160M Design: B5 Protection class: IP55 Insulation class: F Operating mode: S1 Number of poles: 2 Weight: 84 kg Bearing, drive end: 6211-2ZC3 Bearing, non-drive end: 6309-2ZC3 Lubricant: Unirex N3 Condition: used, overhauled and tested Overhaul: March 2026

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), first registration: 02/2024, fuel type: electric, overall weight: 2,390 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, RRP: €41,000. Technical data & drive: Power: 100 kW / 136 hp * Torque: 260 Nm * Top speed: 135 km/h * Battery capacity: 50 kWh net / 54 kWh gross * Range: Up to 275–345 km according to WLTP Charging times: DC (Direct Current): Up to 100 kW at a fast-charging station (0 to 80% in approx. 30 minutes). * AC (Alternating Current): Three-phase charging at a wallbox with up to 11 kW. Special equipment: Rear wing doors with glazing Metallic/mineral effect paint Opel Connect Rear parking pilot system Fpsdpfozt Ulxjx Al Uen Additional equipment: Driver's airbag, audio controls on the steering wheel, audio system BT (Bluetooth/USB interface), electric vehicle, electric motor 100 kW (cont. 57 kW), body/superstructure: van, charging cable with Schuko plug (Mode 2), closed cargo area partition, on-board charger (11 kW), wheel hub covers, wheelbase 2785 mm, halogen headlights, sliding door on the right.

Condition: excellent (used), functionality: fully functional, Manufacturer Siemens Power 11 kW Speed 1455 rpm Fpsdpfx Aljzyzw Uo Usn

Condition: used, mileage: 22,759 km, power: 130 kW (176.75 HP), first registration: 08/1995, fuel type: diesel, empty load weight: 6,930 kg, maximum load weight: 2,570 kg, overall weight: 9,500 kg, axle configuration: 4x4, wheelbase: 3,700 mm, fuel: diesel, color: red, driver cabin: other, gearing type: other, emission class: none, suspension: other, number of seats: 9, total length: 7,020 mm, Year of construction: 1995, operating hours: 101 h, construction height: 3,100 mm, Equipment: all wheel drive, trailer coupling, The used Iveco FF 95 E LF 8 is a robust fire engine with a 4x4 all-wheel drive and a double cab, ideal for operations in challenging terrain. The 1995 model offers swap loading and comes with a 620-litre fire water tank and an integrated FP 8/8 pump. It has a mileage of 22,759 km and first-class care behind it, which leaves it in excellent condition despite its age. Under the hood of the Iveco is a powerful diesel engine with 130 kW (177 hp) and a displacement of 5,860 cc, which provides the necessary power reserves, especially when fully loaded. The Fedpsr Uzfusfx Al Uepn vehicle has a red paint job, measures 3,100 mm in height, 2,500 mm in width and 7,020 mm in length. With a wheelbase of 3,700 mm, the truck offers solid roadholding. The fire service vehicle has single tires and a permissible total weight of 9,500 kg. Inside, the double cab offers space for up to 9 people, making it ideal for larger teams. Overall, the Iveco is in good used condition, with only one previous owner and a low operating hour count of 101 hours. Double cab, box body with roller shutters, 620 l fire water tank, built-in pump FP 8/8. Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 27,180 km, power: 130 kW (176.75 HP), first registration: 03/1994, fuel type: diesel, empty load weight: 7,010 kg, maximum load weight: 2,490 kg, overall weight: 9,500 kg, axle configuration: 4x4, wheelbase: 3,700 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 9, total length: 7,000 mm, Year of construction: 1994, operating hours: 154 h, construction height: 3,100 mm, Equipment: all wheel drive, differential lock, trailer coupling, The Iveco FF 95 E 18W LF 8/6 is a used fire engine with extensive features, ideal for use in demanding environments. This special-purpose vehicle has a robust 4x4 drive and a 5.9-liter diesel engine with an output of 130 kW (177 hp). The vehicle is equipped with a 6-speed manual transmission and offers space for up to nine people, making it perfect for emergency response teams. The equipment includes a rear-mounted FP8/8 pump and a water tank with a capacity of 600 liters. The vehicle has only 154 operating hours and a mileage of 27,180 km. The vehicle dimensions are 7,000 mm in length, 3,100 mm in height, and 2,500 mm in width, with a wheelbase of 3,700 mm. The permissible total weight of the vehicle is 9,500 kg. The vehicle was manufactured in 1994 and was well-maintained by its previous owner. It has the typical red paint finish for fire engines. Fpjdsr Uzfqjpfx Al Uen Air dryer. Auxiliary heater. Rear pump FP8/8. Water tank 600L. 154 operating hours. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 2,968 km, power: 20 kW (27.19 HP), gearing type: other, fuel type: electric, color: yellow, overall weight: 3,281 kg, empty load weight: 2,380 kg, maximum load weight: 2,000 kg, first registration: 12/2014, emission class: none, suspension: other, Year of construction: 2014, operating hours: 2,968 h, total length: 3,930 mm, driver cabin: other, construction height: 2,400 mm, fuel: electricity, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Specialty vehicles - Fleets Other: - Various loading options Fodpfowbammjx Al Ujpn - Registration service - Delivery within Germany possible for an additional charge Viewings are also possible without prior appointment: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: Email: Further information can be found at We speak German / English / Russian / Italian / French / Spain More Information Sales only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Fsdpozznuvsfx Al Uspn Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: used, Technical specifications: Max. blade diameter: 300 mm Max. cutting height: 110 mm Max. cutting width: 140 mm Max. workpiece length: 2800 mm Adjustable blade angle up to 45° Pneumatic clamping Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 3 kW Overall dimensions: Length: 3600 mm Width: 900 mm Fpsdpfx Alozkh Dps Uon Height: 1450 mm

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Fedpfx Alezmub Ts Uspn

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Fedpsyrpxxsfx Al Uopn

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Processing line for solid wood and MDF boards, including rotary tables and 2 Weeke 500 drilling machines, with stacking units. The line has been dismantled due to the company ceasing its solid wood operations. The line can be divided, and the machines can be purchased separately. Fodpfx Aezb D Nkol Uepn

Year of construction: 2018, condition: used, Compressor system Fedpfx Ajzu Al Ajl Uepn Manufacturer: Atlas Copco Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 Fpodjzudivopfx Al Uon year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, MIG/MAG hose package extension, intermediate hose package -Length: 11 m -Plug -Water cooled Fedpfxed Slaqo Al Uepn -Weight: 20 kg