Used Haas Vf 0 for sale (217)

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Gsdpfx Afetq T Tke Aoka Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Gkedpfxevwz T Ue Af Aoa

Condition: like new (used), Year of construction: 2024, operating hours: 550 h, functionality: fully functional, machine/vehicle number: 1209102, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Haas, controller model: NGC, spindle speed (max.): 12,000 rpm, spindle motor power: 22 W, spindle nose: CT 40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Haas VF-4SS-EU vertical machining center (Super Speed), installed in October 2024, FIRST OWNER, available due to a workshop reorganization. Very low usage: only 550 hours powered-on since installation (estimated ~150 spindle hours). Like-new condition, near-complete 5-axis configuration. Can be seen in operation by appointment. — MACHINE SPECIFICATIONS — • Travels X/Y/Z: 1270 x 508 x 635 mm • Table: 1321 x 457 mm • Super Speed spindle, 12,000 rpm, inline direct drive, taper 40 • Spindle power: 22.4 kW (30 hp) • Rapid traverse rates: 35.6 m/min • Side-mount tool changer (SMTC): 24+1 tools • Haas control (124 power-ons / 1317 tool changes) — SOFTWARE OPTIONS (all enabled) — • Full 5-axis package: TCPC + DWO, 4th and 5th axis enabled • High-speed machining (HSM) • Rigid tapping • M19 spindle orientation • Compensation tables • Macros, rotation and scaling • VPS editing, media display • 1 GB memory, wireless networking Gedpfx Afozgt Tne Aeka • Through-spindle coolant, high pressure (TSC) — PHYSICAL EQUIPMENT — • Haas TRT210 5-axis trunnion/rotary table (dual-axis), like new • Renishaw probing system (part + tool setting) • Through-spindle coolant (TSC) + through-spindle air blast • Programmable coolant nozzle (P-Cool) • Oil mist extractor/condenser • Automatic coolant refill — TOOLING & WORKHOLDING INCLUDED — • 2x Lang zero-point clamping systems • 2x WNT vises + 3x Haas vises • Set of tool holders + set of tools — TERMS — • Net price (plus VAT) — company invoice. • Inspection and machining test by appointment. • Collection on site in Metz (57), France. • Removal and transport entirely at buyer's expense: no handling equipment on site, bring your own lifting/loading gear and carrier. Contact by message to arrange a visit.

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec Gkodpfx Afsy Tp Hgo Aoa - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm control: CNC Haas spindle passage: 76 mm revolution per minute: max. 3400 steples U/min tailstock taper ISO: Ø 290 tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: 360/ 400 V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Gkodovvt Emjpfx Af Aea Electric coolant system provided. Tool measuring system available. I.D. *

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Gsdpfoyu Nb Eex Af Aoka Weight: 240kg

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Gkjdpfxoy Ex T Tj Af Aoa Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: good (used), Year of construction: 2016, functionality: fully functional, HAAS ST-40L CNC lathe, year of manufacture 2016, C-axis, driven tools, tailstock, steady rest, extended bed The machine is equipped with a C-axis, driven tools, programmable tailstock, Kitagawa hydraulic steady rest, chip conveyor, and accessories. The machine is powered on and available for testing by appointment. Machine basic specifications: Manufacturer: HAAS Automation, Inc. Model: ST-40L Year of manufacture: 01/2016 Serial number: 3104909 Control system: HAAS CNC Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 14,062 kg Design: extended bed ST-40L Technical parameters: Max. swing diameter over bed: 876 mm Max. turning diameter: 648 mm Max. turning length: 2,032 mm X-axis travel: 432 mm Z-axis travel: 2,032 mm Work travel X/Z: 18 / 8.1 m/min Rapid traverse X/Z: 18 / 8.1 m/min Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Spindle Spindle: A2-8 Spindle bore: 102 mm Spindle bore diameter: 117 mm Max. spindle speed: 2,400 rpm Spindle power: 30 kW / 40 HP Torque: 1,898 Nm at 150 rpm Chuck: hydraulic 3-jaw Kitagawa B15, diameter 381 mm Turret and driven tools Turret: 12-position combined turret Tool clamping: 6× VDI 40 / 6× BOT Driven positions: every other position in the turret Tool drive: yes C-axis in the spindle: yes Max. speed of driven tools: 0–6,000 rpm Power of driven tools: 9.3 kW C-axis positioning: 0.001° Continuously controlled C-axis in the spindle: yes Tailstock and steady rest Programmable tailstock: yes, servo-controlled Tailstock taper: MK5 Tailstock clamping force: 1,334–6,672 N Hydraulic steady rest: Kitagawa 1131 Steady rest range: 110–310 mm Separate oil lubrication for the steady rest: yes Max. steady rest speed: 650 rpm Max. clamping force of the steady rest roller: 20 kN Machine equipment The machine is equipped with: HAAS CNC control system, Gkedpfx Aszgv E Hjf Asa C-axis, driven tools, 12-position turret with 6× VDI / 6× BOT, programmable tailstock, Kitagawa 1131 hydraulic steady rest, Kitagawa B15 hydraulic chuck, chip conveyor, cooling unit, automatic central lubrication, manual spray gun for coolant, manual air blow gun, remote jog handle, USB port, work area lighting, set of tool holders and accessories. Accessories The machine comes with accessories as shown in the photos, including: ER32 driven tool holders, VDI/BOT tool holders, set of hard jaws for Kitagawa B15 chuck, additional jaws, sleeves and clamping elements. Operating hours According to the display on the control system: Cycle start time: approx. 7,208 h Cutting time with feed: approx. 5,989 h Machine condition The machine is currently in operation and powered on. Inspection and testing are possible by appointment. The technical condition corresponds to the normal operation of a used machine.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Gsdpfx Asypv T Rsf Aoka Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Gsdpozd Tcdjfx Af Aoka Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Gkjdpfsv N Di Aex Af Aoa Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Gedpfxox D Ezfo Af Aoka Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 254mm 3 jaw chuck, 22.4kW Spindle Motor, Gsdpfxoywuvho Af Aska 3400rpm spindle, 12 Station turret, tailstock, coolant, tool setter.

Condition: excellent (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, controller manufacturer: Haas, controller model: haas, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 40, Haas EC500 Gjdpfx Afeziflzj Aoka 2008 ATC-40 tools . BT40. 2 Pallets spndel time -18500H Spindel rpm- 12000 rpm X-axis travel: 813 mm Y-axis travel: 635 mm Z-axis travel: 711 mm Pallet size: 500 x 500 mm Number of pallets: 2 Automatic pallet changer under power Located in Israel ready for inspection

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 1097415, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 318 kg, overall weight: 6,350 kg, table width: 508 mm, spindle speed (min.): 10,000 rpm, table height: 324 mm, Technical Data BRAND: Haas MODEL: MDC-500 SERIAL NUMBER: 1097415 Year: 2012 Numerical Control: Haas Location: Tabaza (Asturias- Spain) TABLE DIMENSIONS Table surface: 508x324 mm. Number of tables: 2 Maximum weight on the table: 318 kg. Gkedpjtr Ufljfx Af Aoa RANGE Longitudinal travel X: 508 mm. Transversal travel Y: 356 mm. Vertical travel Z: 508mm. SPINDLE Cone: BT40 Spindle speed: 10.000 r.p.m. 22.4 Kw 122 Nm ATC Capacity: 24 Station Tool change time: 4.8s ADVANCES Working feeds: 21.2 m/min Rapid feeds: 25.4 m/min WEIGHT AND DIMENSIONS Machine dimensions: 3.632x3.404x2.870 mm. Machine weight: 6.350Kg. ACCESSORIES Programmable coolant Chip conveyor Renishaw T527R probe

Condition: used, Year of construction: 2003, operating hours: 3,718 h, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rotational speed (min.): 8,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, HIGH PRESSURE CTS20 BAR Gkodpfxoxb D Ais Af Aea 4/5 AXIS TABLE

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, Gkjdpokticxofx Af Aea CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 3,200 rpm, travel distance X-axis: 318 mm, travel distance Z-axis: 660 mm, spindle motor power: 224,000 W, total height: 1,900 mm, overall weight: 7,200 kg, product length (max.): 3,800 mm, number of axes: 2, This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information. • Turning diameter: 533 mm • Turning length: 660 mm • Spindle nose: A2-6 • Bar capacity: 76 mm • Spindle bore diameter: 254 mm • Max cutting speed: 10.2 m/min • Rapid feed rate: 24 m/min • Tool presetter: Yes • Tailstock: Semi-automatic hydraulic • Tool turret: 12 positions, VDI 40 Additional equipment • Chip conveyor: Screw type Gksdpfx Afex D Irgj Aoa • Bar feeder: LNS Quik Load Servo III Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2018, table load: 227 kg, number of axes: 5, This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine. • Condition: Brand new, never used • Table diameter: 310 mm • Max part swing: 787 mm • Standard T-slots: 6 @ 60° • Max rotation speed: 50°/secB Axis (Tilting) • Backlash: 30 arc-sec • Ratio: 3:1 • Max speed: 50°/sec • Max runout: 0.025 mm • Travel range: ±120° • Resolution: 0.001°A Axis (Rotary) • Accuracy: ±15 arc-sec • Repeatability: 10 arc-sec Gkjdpfx Aex D I H Rjf Aoa • Max rotation: 999.999° (with rotary control) • Resolution: 0.001°

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm Gsdpfx Afoupmhws Ajka turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 863 mm, turning diameter: 432 mm, rotational speed (max.): 3,400 rpm, swing diameter over bed slide: 762 mm, controller model: Haas CNC Control, TECHNICAL DETAILS Turning diameter: 432 mm Turning length: 863 mm Spindle speed: 3,400 rpm Spindle bore: 88 mm Tool turret: 12 stations Tool holder: VDI 40 Swing diameter over bed: 762 mm Swing diameter over cross slide: 432 mm Three-jaw chuck diameter: 254 mm Tailstock quill ISO: 290 Bar capacity: 76 mm Travel Z-axis: 864 mm Travel X-axis: 287 mm MACHINE DETAILS Control: Haas CNC Control Spindle motor power: 22 kW Dimensions & Weight Required space: 3.9 x 2.0 x 1.9 m Machine weight: 7.25 t EQUIPMENT Gkodpfx Afjywhfvs Aoa Technical documentation

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Gjdpjx H Uz Nsfx Af Aska Model Sigma 5 Main Drive Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: used, Year of construction: 2008, HAAS SL - 20 LATHE, YEAR FIRST INSTALLATION: 2008 TURNING LENGTH: 508 mm TURNING DIAMETER: 262 mm TRAVELS: X: 203 mm Z: 508 mm BAR CAPACITY: 51 mm NUMBER OF TURRETS: 1, 10 POSITIONS SPINDLE SPEED: 4,000 RPM Godoyzzw Tspfx Af Ajka CHIP CONVEYOR

Condition: excellent (used), Year of construction: 2013, Available end of July. Technology Inline direct drive Speed 12,000 rpm Power 22 kW Tool holder SK40 Tool changer SMTC, 41 positions Technology 2 axes, with counter bearing B-axis -35° / +110° C-axis 360° Clamping surface ø630 x 500 mm Table load (max.) 300 kg Cooling Standard coolant including P-Cool and through-spindle cooling (TSC) Gkodpfx Afoyimnco Aoa Renishaw probe WIPS system with touch probe and tool measurement 8M functions Rotating and scaling 16MB memory storage HSM high speed milling Rigid tapping Machine cycle time: 5,446 h Machine power-on time: 21,246 h

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70161, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 864 mm Turning diameter over cross slide: 450 mm Longitudinal travel: 864 mm Cross slide travel: 287 mm Spindle speeds (stepless): 0 - 3,400 rpm Spindle bore: 105 mm MACHINE DETAILS Operating voltage: 400 V Gedpoizwwmofx Af Aska Connected power: 28 kVA Space requirement: approx. 3.2 x 2 x 2 m EQUIPMENT - 12-position turret - Power chuck - Large spindle bore - Tool presetting