Used Height Gauge for sale (36,329)

Operating hours: 2,419 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 125 mm Fork length: 1,150 mm Operating hours: 2,419 h Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Battery voltage in idle state: 25.3 V Battery year of manufacture: 2021 Next service due in: 1,000 h MACHINE DETAILS Ibsdpfxez R D Dks Ap Djc Manufacturer: Linde Type: T20AP Year of manufacture: 2021 Overall length: 2,000 mm Overall width: 750 mm Overall height: 1,200 mm Dead weight: 1,000 kg EQUIPMENT Folding platform Battery with Aqua+EUW Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-collection within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 309

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DRIVE Drive type: Electric Battery voltage: 48 V Battery capacity: 375 Ah Battery voltage at rest: 50.5 V OPERATING DATA Operating hours according to display: 16,042 h Year of manufacture: 2018 MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 1,850 mm Overall width: 1,000 mm Overall height: 1,400 mm Unladen weight: 1,500 kg EQUIPMENT White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Service valid until: UVV (Occupational Safety and Health) valid until: Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 329 Ibedpfx Asz R D Euop Doc

Operating hours: 1,288 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Ibedpfx Apjz R D Ipo Djc TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm Battery voltage: 24 V Battery capacity: 300 Ah Battery voltage in idle mode: 25 V Operating hours: 1,288 h MACHINE DETAILS Manufacturer: Toyota Type: LPD200 Year of manufacture: 2020 Own weight: 850 kg Overall length: 2,000 mm Overall width: 800 mm Overall height: 850 mm EQUIPMENT Folding platform Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: new, neu ca. 2 Wochen ab Auftragse Türkei 153986 € 1867.32 € 98800 € 320 to 3050 mm 365 mm 2600 mm 750 mm 630 mm hydraulisch 160 mm/s 10 mm/s Iedpfxsz Ihype Ap Djbc 140 mm/s 500 mm/s 350 mm/s 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: used, machine/vehicle number: H2X387J01952, Year of construction: 2018, operating hours: 4,940 h, load capacity: 3,000 kg, lifting height: 3,760 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,760 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast with full free lift Drive type: Electric Battery: 80 V, 4 PzS, 620 Ah Battery year of manufacture: 2022 Battery equipment: Aqua+EUW Battery voltage in idle state: 83.3 V Operating hours: 4,940 h Dimensions & Weight Ijdpfxjz Nn Nnj Ap Dsbc Dimensions (L x W x H): 3,400 x 1,200 x 2,470 mm Own weight: 5,600 kg Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Semi-cab Windshield with wiper Comfort seat Integrated charger LED work light, front LED work light, rear Orange warning light Safety light, front Safety light, rear Full free lift Fork adjuster: Hydraulically adjustable Side shifter Hydraulic valves: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 67

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Ibsdjz Hnzkspfx Ap Djc Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: new, Year of construction: 2026, machine/vehicle number: PB11032, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 110 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table width: 300 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 400 mm, ram plate width: 1,700 mm, ram plate length: 3,200 mm, distance table to ram: 2,700 mm, clearance between the columns: 2,600 mm, oil tank capacity: 400 l, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1100 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2600 mm 5 Stroke 200 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m Ibsdpfx Apsz H Skve Doc 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: excellent (used), Technical specifications: Working length: 4100 mm Frame width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools Condition: The machine is in very good overall condition. Retrofit in January 2026. Iodpoz E A Susfx Ap Debc The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2005, power: 7.5 kW (10.20 HP), pressing force: 120 t, stroke length: 1,000 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 400 mm, clearance between the columns: 2,550 mm, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, overall weight: 9,650 kg, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Ibedpfx Apez Hka Ae Dec Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, maximum load weight: 33,162 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2024, loading space length: 9,790 mm, loading space height: 2,100 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: 5 x Schmitz, approx. 50 cubic meter grain hoppers Registration date: 01.10.2024 Low mileage Permissible total weight: 39,000 kg Unladen weight: 5,838 kg Payload: 33,162 kg Overall length: 10,910 mm x overall width: 2,550 mm x overall height: 3,800 mm Axle load: 24,000 / 27,000 kg Saddle load: 12,000 / 12,000 kg Wheelbase: 1,310 mm Saddle height: 1,260 mm Ride height: 440 mm Track width: 6,600 mm Tires: 385/65R22.5, approx. 50-80% tread Schmitz turntable 1st lift axle ALCOA aluminum rims Tire pressure monitoring system Plastic individual fenders TÜV (technical inspection): 10/2024, next inspection: 04/2027 Rear underrun protection, foldable Low-pressure cylinder 170 BAR, max. 190 BAR, Hyfa Air suspension with lift and lower function Automatic tipping lowering Load pressure gauge 2 x wheel chocks 2 x 12-ton, 2-speed geared winch, Jost 2 x LED reversing lights Tow hitch with drawbar Storage box, plastic Roll cover, platform Aluminum box body, 9.6 cubic meters, with hinged tailgate with rubber seal + grain slide + dust bag Height: 2,100 mm, length: 9,790 mm, 2.5 mm rounded lower belt, front panel inclined by 20 degrees (conical body) Load volume: approx. 49.7 cubic meters Aluminum floor, reinforced at the rear, approx. 8 mm, at the front approx. 7 mm Tipping body, light gray 7.035, chassis Schmitz Granit AKZO 499H3 7350 Ibodpfx Apsz Dc Ito Djc Price per vehicle: €38,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical Data Charging voltage: 80 V Charging current: 280 A Charger type: Modular HF charger General Data Manufacturer: Hawker Model: Life SeediQ Year of manufacture: 2019 Application: Forklifts / Electric forklifts MACHINE DETAILS Dimensions Length: 600 mm Width: 600 mm Height: 800 mm Weight Net weight: 80 kg EQUIPMENT Battery connector Wall connector Isdpfoz R Rizjx Ap Debc All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the item is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3758

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery Manufacturer: Still Type: 24 V 4 PzS 620 Ah Battery voltage: 24 V Capacity: 620 Ah Year of manufacture: 2022 MACHINE DETAILS Dimensions and weight Overall length: 800 mm Overall width: 300 mm Overall height: 800 mm Net weight: 500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for late collection. Any outstanding storage fees must be paid in full before collection. Lot number: 1171 Ibodpfxsz R Rhqs Ap Dsc

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Manufacturer: Fronius Model: Selectiva 4.0 4060 Output voltage: 48 V Charging current: 60 A Power: 3,280 W Mains voltage: 220 V MACHINE DETAILS Year of manufacture: 2022 Weight: 10 kg Overall length: 300 mm Overall width: 300 mm Overall height: 300 mm EQUIPMENT REMA battery connector 220 V mains plug All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tons possible with a large forklift on site. Loading is done at your own risk. * Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. * A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Any outstanding storage fees must be paid in full before collection. Lot number: 3779 Ijdsz R Ri Ujpfx Ap Debc

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Numerical display for working height Planer table made of gray cast iron The planer table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller clamping pressure adjustable Front infeed roller with helical gears Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter block Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position is maintained perfectly even without locking Iedjd Hx E Iepfx Ap Dsbc Helically geared steel infeed rollers for consistent and even wood feed Second, rubberized feed roller at the outfeed Solid anti-recoil guards prevent workpiece recoil A 4-cutter block ensures an optimal planing result Dimensions and weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust extraction connection Dust extraction nozzle diameter (planer table) 150 mm Drive power Main motor 7.5 kW Installation information Space requirement (length) 1170 mm Space requirement (width/depth) 1003 mm Space requirement (height) 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 520 mm Planer table width 1000 mm Working height min. 3.5 mm Working height max. 250 mm Working length min. 210 mm Maximum chip removal 8 mm Electrical data Connection voltage 400 V Planing cutter block Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Ibjdpeff Efasfx Ap Djc Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Isdjb S Uzkjpfx Ap Dsbc Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Amada, controller model: Amada AB-Pad, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Length (mm): 4580 Ibedpsynbfvefx Ap Doc Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Technical Data Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5–3° Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system! Ibedpozw Rv Ujfx Ap Dec

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves Iedsz Hgb Aepfx Ap Dobc - Table manually height-adjustable and secured with 3 locking pins

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Ibodsz S Nm Topfx Ap Dsc Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Ibodpjz S Nq Sefx Ap Dsc Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: used, machine/vehicle number: H2X386E52851, Year of construction: 2014, operating hours: 4,974 h, load capacity: 1,600 kg, lifting height: 4,625 mm, mast type: triplex, overall weight: 3,320 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Rest voltage: 48.51 V Service valid until: 10/2027 Safety inspection valid until: 10/2027 Machine type: Electric forklift Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,320 kg Operating hours: 4,974 h Ibjdpfx Apoz S Npus Doc EQUIPMENT Former Linde full-service unit Semi-cab with windshield and wiper Roof window White, non-marking tires LED work light, front LED work light, rear Safety light, rear Comfort seat with lumbar support Charger Hydraulic function: 3rd valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if collection is not made within the specified period. Outstanding storage fees must be paid in full before collection. Lot number: 110

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Iedpjz S Ntgsfx Ap Debc Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Weight: 1,500 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: excellent (used), Year of construction: 2008, power: 42 kW (57.10 HP), pressing force: 320 t, stroke length: 4,000 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, throat depth: 400 mm, clearance between the columns: 3,150 mm, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, overall weight: 23,000 kg, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Ijdpoz Rmp Nofx Ap Djbc Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Ibodpfewzh A Nex Ap Dsc Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross