Used High Frequency Weld for sale (28,659)

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Lhedpfx Ajz Trrhjkqsn Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Lodpfx Aezlzv Iekqehn Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Particle filter Lhodpfozizpcex Akqjn Activated carbon filter Weight approx. 900 kg Condition: used Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Extraction system TBH GL 230 Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2003, functionality: fully functional, Used IDEAL BAS120 resistance butt welding machine for joining band saw blades, built in 2003 (serial no. 229981). It welds the blade and then anneals the seam on the same machine, so it fits a saw shop, a blade service workshop or an in-house sawmill maintenance department. The machine has an IDEAL UniOp control, which gives repeatable weld settings. Welding power is 45 kVA and the upsetting force is 20 kN. Model iDEAL BAS120 Year 2003 Control UniOp Power 4.5 kVA Voltage 415 V Frequency 50-60 Hz Max. Stauchkraft 20 kN Serial no. 229981 Lhodpfx Aks Abzqbjqon

Condition: good (used), Year of construction: 2021, REF: MM6468 Lodpfezn Rbfsx Akqjhn 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Machine weight - 390 kg.

Condition: new, Year of construction: 2018, operating hours: 2 h, SJ 1 2 0 X 3 8 h i g h e f f i c i e n c y single screw extruder with auto feeder and dryer SJ 30X25 Mark line extruder The head, mold and calibrator ( 710 1 2 00 mm Front vacuum fix ing tank 1.5m Back vacuum fixing tank Lsdpfx Akeqmn Ibjqohn 10.5m Spraying cooling water tank 6m Oval adjusting equipment QJ 1 20 0 Haul off machine ten tracks) QG 1 2 00 Chipless cutter Pipe s tacker

Condition: used, Year of construction: 2010, controller model: , _____ Lhsdpsz Sw N Ajfx Akqen Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: used, IPG Type: Laser welding pliers LSS-5M-3500-3F Ytterbium fiber laser The laser welding pliers LSS5 M complements the series as a compact welding tool. With laser power ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser pliers Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0 kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Lhsdjzd Rinjpfx Akqon Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60 Hz 32A/120k Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have over the phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4 C) High-performance disk laser with up to 6.6 kW Lsdpfjzii D Ijx Akqshn   Type: TruDisk 6602 (4 C)   The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser with approximately 6.6 kW continuous power – perfectly suited for welding, cutting, and surface treatment processes on metals such as steel, aluminum, copper, etc.   System type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5   No further testing was carried out in-house. The operating hours could not be read. The laser ran perfectly until the end.   Key technical features: Power: 80 W to 6600 W continuously adjustable, max. 6.6 kW machine tools Beam quality: < 2 mm·mrad for excellent focus handling Wavelength: 1030 nm (infrared), also adapted for green wavelength in special models Output options: Up to 4 laser outputs (4C) for simultaneous supply to multiple process cells Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) Modular and service-friendly: Compact design (< 1 m² footprint), modular components for fast service   Advantages & Applications Maximum process stability: Real-time power control ensures reproducible results Reflection resistance: Patented resonator design allows welding of reflective metals such as copper/aluminum Industry 4.0-capable: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes Versatility: Applications range from welding (also BrightLine for virtually spatter-free results) to cutting, hardening, casting processing, additive manufacturing, laser wire arc welding, etc.   Suitable applications: Ideal for industrial high-power laser applications: Application Features Manufacturing of automotive structural components Deep welding with high reproducibility Copper welding Particularly suitable with green wavelength (> 95 % spatter reduction) Remote hybrid welding Fast processing of large areas with a robust beam Additive manufacturing & hardening Suitable due to beam quality & compact design   Key technical data Property Laser power Up to 6,600 watts (6.6 kW), continuous Beam quality < 2 mm·mrad Wavelength 1030 nm (infrared) Number of outputs (4C) Up to 4 parallel usable fiber outputs Fiber connection diameter 100–600 µm (depending on configuration) Beam guidance Fiber-based, passive (no beam steering mirrors required) Cooling Water/air-cooled, internal or external chiller Dimensions Approx. 1000 × 800 × 2100 mm (W×D×H, depending on the version) Weight ~800–1200 kg (without cooling) Power supply 380 V - 10 % ... 460 V +10 %, 3AC + PE 38 kW / 41kVA 59 A / 400 V 50... 60 Hz Control TruControl 1000/3000, OPC-UA interface Safety standards Laser protection class 4 according to EN 60825-1   Weight: approx. 1200 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Lsdpfx Aksy Nl U Soqohn

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Lsdpfoz I Tt Iox Akqehn Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Lsdsrfucqepfx Akqshn Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg Lsdpfxou Nv Dps Akqehn electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Lhedpfxozd Rmge Akqen Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Lhedpfx Aou Nv Afskqjn Suction capacity approx. 2000m³ mobile over 4 wheels, front braked *

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, Welding fume extraction, dust extraction, self-cleaning filter, pneumatic, vacuum-based KEMPER. For welding, grinding, sandblasting and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Device for wall mounting. Fan power: 1.5 kW Flow rate: 1000 m3/h Maximum vacuum: 3000 Pa Extraction arm length: 3.00 m Stock number: 0391 Lhodpfezlqkhox Akqsn

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Lhsdpfx Aez Ixzqekqjn Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Lhodpfx Aov A Rppjkqsn Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We are offering this very well-maintained machine for the production of paper cups (8oz), manufactured in 2017. Machine designation: Paper Cup Machine (8oz) Manufacturer: DAE SUNG HIGH TECH CO., LTD. Model: DSD-60A Serial number: 17-DS-0027_INTERPACK Ljdpfx Akoziau Deqohn Year of manufacture: 2017 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Technical details: welding current: 500 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 65 V capacity in kVA: 20,1 KvA protection class: IP23S weight of the machine approx.: 85 kg dimensions L x W x H: 0,60 x 0,44 x 0,44 m Ledpfez Dt Tgjx Akqjhn Kemppi FastMig KM 500 – MIG/MAG Welding Power Source The Kemppi FastMig KM 500 is a powerful industrial MIG/MAG welding power source designed for professional welding applications in metal fabrication, mechanical engineering, production and maintenance. With a maximum welding current of approximately 500 A, the KM 500 is particularly suitable for demanding welding work and applications requiring high welding performance and a high duty cycle. The power source is designed as part of the modular Kemppi FastMig system and can be combined with suitable Kemppi wire feeding units, such as the FastMig MSF series. The modular design allows the power source and wire feeder to be positioned separately, making the system suitable for both workshop use and larger workpieces. Typical applications: steel construction, mechanical engineering, heavy fabrication, repair and maintenance, production welding and general industrial MIG/MAG welding. *

Condition: used, 3D Systems Type: ProX™ 800 ProX™ 800 3D production printer from 3D Systems – high-performance SLA printer The system has been regularly maintained. Operating hours: 18,700 (as of April 18, 2023) Not in operation after April 18, 2023. Note: Annual maintenance performed until decommissioning. For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. Lsdpfx Akezii Umoqehn This large-format SLA system is equipped with state-of-the-art print head technology and is suitable for highly precise components and industrial applications (e.g., automotive, aerospace, medical technology). Additional features: Automatic material replenishment system and pre-configured material supply module (fast module change, uninterrupted operation) 3D-Manage™ software for CAD model and print job control Touchscreen control on the device (Print3D Pro™) Status/signal light module, central user guidance Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and locking mechanisms Detailed maintenance and troubleshooting functions Material container (MDM) Technical data: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) Maximum build volume: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Accuracy: ± 0.025–0.05 mm per inch Materials: wide selection of Accura resins (durable, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: single-phase connection Fuse: 30 A Weight: approx. 1200 kg including material module Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane Lodpfx Asyt I Axskqohn *

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We are offering this very well-maintained machine for the production of paper cups (12 oz), manufactured in 2018. Machine designation: Paper Cup Machine (12 oz) Manufacturer: DAE SUNG HIGH TECH CO., LTD. (Country: Korea) Model: DSD-60A Serial number: 18-DS-0045 Year of manufacture: 2018 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please do not hesitate to contact us. Lhedpfjzia U Dsx Akqen

Condition: like new (used), Year of construction: 2025, High Lift Electric Pallet Truck ( As NEW) Year 2025 Pharma specifications 800mm Lift Fully stainless steel Ljdpfx Akez I S Eijqjhn Fork length 1150mm Lift capacity 1000kg Compact battery pack, folds up inside the truck, no possibility of damage Complete with charger CE certified Quantity six in stock

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210198, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2026, Equipment: documentation/manual, F2000 HS - HIGH SPEED AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 600 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 1200 cartons/min (depending on length and quality of the cartons) - Motorized carton magazine: 120 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm HG - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Protection class IP 54 - Compressed air 6 bar - Air consumption 22 nl - Operating environment +5° C - max. +35° C - Working height 650 mm, adjustable +30 mm - Weight 1,160 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection The system includes a GEM B52HS carton sealer. Lhodpfjz Dwz Iox Akqjn GEM B52HS CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ mm - Width: min. 150 mm - max. 670 mm - Height: min. 100 mm - max. 670 mm TECHNICAL DATA: - Drive and guide belts, vertical - Carton format adjustment, manual - Sealing unit, bottom - Standard version T22 / T23 - Adhesive tape width: 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm - Adhesive tape roll core: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Consumption 0.25 kW - Protection class IP 54 - Operating environment +5° C - max. +35° C - Transport speed 22 m/min - Average production 1000 cartons/hour - Working height 650 mm - Weight 120 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may contain optional features that incur an additional cost.