Used High Precision Milling Machine for sale (93,072)

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Control panel on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Nedpfjx Eyh Eox Agzodf Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/9000 rpm Height adjustment approx. 150 mm Required space approx. 1300 x 1100 mm Weight approx. 850 kg Further technical data available on request All data taken from a brochure; therefore, all information is without guarantee.

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Table swivel: + - 45 ° Further data: See PDF Njdpfx Agetunbuozjdf Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Chain width: 17 mm Motor: 2.2 kW

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nodpfx Agor A Eq Rszjdf Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW Ndsdjw Rv Ahjpfx Agzjf - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Ndodpfx Asw T S Sqjgzef Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Multi-spindle milling machine Fritz Werner SSF 3Article number: 07-99-001Manufacturer: Fritz WernerVery good overall conditionMachine workshop testedDelivery time: Immediate - sale subject to prior saleYear of construction: approx. 1980Dimensions (L x W x H): approx. 1900 x 1800 x 1800 mmWeight: approx. 1200 kgTravel ranges:X-axis: approx. 600 mmY-axis: approx. 200 mmZ-axis: approx. 500 mmTable clamping area: approx. 740 x 220 mmSpindle:Speed range: approx. 3000 rpmDrive power: approx. 7.5 kWFeeds & rapid movements: in all 3 axesMax. milling area (dovetail): approx. 400 mm widthSwivel range of 1st & 3rd milling spindle: approx. 50-80 degreesHeight adjustment 1st & 3rd milling spindle: approx. 80 mmHeight adjustment 2nd milling spindle: approx. 50 mmAccessories:Left/right operationMechanical vice10 pieces of various milling head attachmentsWork lightFurther accessories available upon requestPrice and further technical details available upon request. Nsdpewl Aqvjfx Agzjdf

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Ndsdovz A Riepfx Agzef Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: used, A rigid table milling machine or rigid milling machine Bäuerle type SFM for profiling and milling wood, equipped with a table extension and a feed device. Spindle ø: 30 clamping length: about 120 mm speeds (milling machine): 3,000/5,000/6,000/10,000 rpm Direction of rotation: Left and Right Nsdov Hf Uuepfx Agzodf

Condition: excellent (used), Spindle Moulder SCHELLING FZ 4 Heavy-duty cast-iron construction Motor speeds: 2250, 3000, 4500, 6000, 9000 rpm Motor power: 4.5 kW, 400 V, 50 Hz Spindle diameter: 30 mm Spindle height adjustment: 100 mm Table dimensions (L x W): 1100 x 900 mm Extraction port diameters: 120 & 80 mm Spindle with forward and reverse rotation Electric motor brake Milling fence rotatable and finely adjustable OERTLI milling fence jaws with aluminium inserts INCLUDES HOLZHER power feed unit 3 rollers 4 speeds Machine dimensions (L x W x H): 1100 x 900 x 1200 mm Machine weight: approx. 750 kg Note on used machines: • Errors in technical specifications and prior sale are excepted. • Listed prices are ex-works prices - free loading at location! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any form of warranty. Buyers are welcome to inspect machines at the location. Nsdpfx Ajxt N Dvogzodf • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg Ndedpfx Ajxt Ic Dogzjf ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Nedjw Uc Npepfx Agzodf Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 1994, Stroj v dobrém provozním stavu, včetně digitálního odečtu. Plocha upínacího stolu mm 400 x 800 Pracovní zdvih: podélná mm 600 kříž mm 400 vertikální mm 400 Nedpsxdxp Njfx Agzsdf Kužel ve vřetenu ISO 40 Rozsah otáček rpm.40 - 2000 Počet otáček kroky 18 Výkon hlavního motoru kW 3,0 Celkový vstup stroje kVA 6,5 Rozměry stroje mm 1675 x 1680 x 1740 Hmotnost stroje kg 1725

Condition: used, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 350 mm, table width: 1,770 mm, table length: 3,550 mm, overall weight: 9,000 kg, total length: 5,890 mm, total width: 2,990 mm, total height: 3,125 mm, tool diameter: 140 mm, tool length: 200 mm, tool weight: 15,000 g, tool magazine motor power: 12,000 W, SPECIAL PRICE Advanced Cnc Router for Drilling, Contouring and Shaping slabs in Marble, Granite, Quartz, Ceramic, Lapitec to create kitchen and vanity tops Ndjdpfx Aexdiupjgzef

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2003 Machine No. 344174 >> Fixed angular table Ndedpfex Elxpex Agzof >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel Heidenhain About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only sparingly used for training purposes. The control system is very easy to operate. The machine also features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by simply swiveling the vertical head aside. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to view and test the Kunzmann under power at our facility. The machine is available immediately.

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Ndjdpowu D A Eefx Agzjf Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke Ndedpfxstx T Dxo Agzjf - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: new, The SBF 40 TV 1000 is a versatile machine tool in the Conventional Vertical Milling Machines category, belonging to the Mill Drills group. This robust drilling and milling machine excels with a powerful drive and a wide speed range, making it an ideal choice for working with steel and non-ferrous metals. Notably, its large compound sliding table features an automatic infinitely variable feed on the X-axis, allowing for precise coordinate drilling and light milling. Equipped with an oil-bath lubrication system, the quiet operation enhances tool life and durability, while the high-quality spindle bearing supports higher loads over extended periods. The head can swivel for diverse applications, and it includes convenient features like controllable automatic feed, adjustable table guides, and a built-in coolant system. With the SBF 40 TV 1000, you can enhance your machining capabilities at an unbeatable price. Request a quote today to get started with this impressive milling solution from KNUTH! Ndjdpfjuyibcsx Agzsf

Condition: used, functionality: fully functional, spindle diameter: 30 mm, table width: 1,070 mm, type of input current: three-phase, spindle speed (min.): 3,000 rpm, spindle speed (max.): 9,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left Ndedpfx Agjw Ip Dmjzsf – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: good (used), Deckel Maho 4-Axis CNC Milling Machine DMC 64 V linear Working area: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - Equipped with Heidenhain 520 control - Equipped with coolant system and paper filter - Probing system prepared, but probe is missing - Low operating hours - Machine from original owner - Used for single-part production of precision components - All 4 axes are operational; however, the encoder for the main spindle is defective Good condition, fully functional. Can be viewed and tested under power on site. Shipping also available internationally. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided above or below at any time. Subject to prior sale and possible errors in the description. VAT will be shown separately on my invoices. Nedpfxexivy Ns Agzedf Shipping by freight forwarding.

Condition: excellent (used), Catalogue number 7758 TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm Nodpfjxhdqgjx Agzjdf - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: good (used), MAHO Milling machine MH400 - holder SK40 - with digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Ndodpfoum Rnpsx Agzsf Shipping with forwarding agent.

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm Nsdpfxolq Egvs Agzsdf - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: good (used), Year of construction: 2002, DECKEL MAHO Milling Machine DMC 63 V Good condition, fully operational, can be inspected and tested under power on site. Shipping available internationally. Nedpfx Agoxuwm Ijzjdf Inspection: In principle, I would like to point out that to avoid misunderstandings, the item can be inspected and tested under power before purchase. Please ask any questions prior to purchasing to avoid ambiguities. For general inquiries or to arrange an inspection appointment, I can be reached at the phone number listed above or below at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight carrier.

Condition: good (used), DECKEL MAHO 5-Axis Milling Machine DMU 50 eVolution - With probe Nodpfjx Emxkox Agzedf - With handwheel - With several tools Good condition, fully functional, can be viewed and tested on site. Shipping also available abroad. Inspection: Please note that, to avoid misunderstandings, the item can gladly be inspected and tested under power before purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipment via forwarding agent.

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Nodpfxsum Rpye Agzodf Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.