Used Horizontal Boring Machine for sale (66,155)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 Hnsdpsyt Nnpsfx Ak Ueu Sale and collection: Sales are exclusively within the EU. Due to the high administrative effort and lack of experience with export processing, we cannot offer sales and deliveries to countries outside the EU. Collection, loading, packaging, and transport are the responsibility of the buyer and at their expense. The machine is still powered and available for immediate collection. • P8 power supply, with a value of 1500, was replaced in August 2024. • The spindle was repaired in 2017 and has since mainly been used for single-shift operation, as we primarily manufacture individual parts and small series. Therefore, the machine has mostly been used for setup work. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm*500mm) • Travel ranges: X630mm Y600mm Z650mm • Spindle speed: Milling spindle 12000 rpm • Chip conveyor Known defects: The rapid traverse speed of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring is likely damaged during pallet changes, resulting in oil leakage. We have temporarily resolved this by installing a ball valve in between; we only need to open this when we change pallets, which we do not do very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being shut down for a longer period. The procedure for restoring it is known. If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 66 W, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Machine: Horizontal CNC machining center Hodpfx Aez N D Akok Uenu Manufacturer: Hüller Hille Type: Bluestar 6 Year of manufacture: 2007 Control system: Fanuc 21iMB Technical data X / Y / Z-axis: 800 / 800 / 800 mm NC table: 0.001 degrees 2 pallets: 630 x 630 mm Pallet load: max. 1000 kg Workpiece size (diameter x height): max. 900 x 950 mm Spindle speed: 8000 rpm Spindle drive: 66 / 54 kW Tool holder: SK50 Tool changer: 40 stations Tool weight: max. 20 kg Tool diameter x length: 125 x 450 mm Feed rate: 50000 mm/min Rapid traverse: 50 m/min Machine dimensions (L x W x H): 4800 x 3400 x 3400 mm Machine weight: 18000 kg Accessories: Chip conveyor, coolant system, extraction system Still in operation and available for inspection.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,012 h, functionality: fully functional, machine/vehicle number: 31-46644, The HELLER MCi 16.2 is a high-precision, CNC-controlled horizontal machining center (HMC) from the German manufacturer HELLER. The machine is designed for productive and flexible series production (e.g., in mechanical engineering or the automotive sector). Equipment: -Horizontal spindle, pallet changer with rotary table, additional 4-position pallet changer (manufacturer: RILE RSP-MC+16.2, year of manufacture: 2004, serial number: 0421635093) -2nd operator terminal, chain-type tool changer with approximately 80 positions, chip conveyor (manufacturer: Knoll 600K, coolant/lubricant processing with band filter, switch cabinet, separate cooling unit (manufacturer: BKW) Hjdsz N Ewispfx Ak Uenu Control: -Siemens 840D Accessories: -Telescopic drawer cabinet (8 drawers) with attached work surface, workbench (1 door) with partition, lighting fixture Contents: various machine accessories

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Hedpfx Aoz Rmq Tsk Uenu Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 Hnjdpezbt D Defx Ak Uou S/N 1591356 Year of manufacture: 2023

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Hnsdpfx Akoz Rmn Ej Uou Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Code: 0743 Brand: MASTERWOOD - ITALY Hjdpfx Aezp D Nljk Usnu Model: SPEEDY 207 - CE Standard Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 vertical and 1 double horizontal independent chucks - Spindles rotation rpm 4500 Saw for longitudinal cuts - Saw rotation rpm 6000 Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Vertical pneumatic tool displacement mm 60 Max panel thickness mm 50 Vacuum pump 16 m3/h for panel clamping Vacuum cup diameter mm 80 Clamping cylinders for narrow workpieces against fixed rear stops Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Safety protection: carpet sensitive to the presence of people Overall dimensions - Machine : mm 2500 x 1500 x 1800 h - Weight kg 860 Overall dimensions - Electric board : mm 800 x 550 x 1100 - Weight Kg 120

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. Hsdpfjz Nlzzex Ak Uonu IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Hnodpfxjzp Dn Ij Ak Uou Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, Hedjvl Eynepfx Ak Usnu Drilling width 240 mm, Drilling depth 150 mm, Max. travel 230 mm, Drill head height adjustment 160 mm, Drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, Speed 3,000 rpm, Motor 2.2 kW, 400 volts, 50 Hz, Weight approx. 345 kg, Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Hnedpfx Aoz R Nupsk Uou Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: good (used), Universal tool milling machine Mikron WF 2 Manufacturer: Mikron Type: WF 2 Machine category: Universal tool milling machine Spindle speeds: 12 Speed range: 50–2240 rpm Spindle speed step: 1.4 Feeds: 18 Feed range: 8–400 mm/min Feed step: 1.25 Rapid traverse rate: 1400 mm/min Milling spindle motor: 2-speed, 1.2/1.8 kW at 1400/2800 rpm Feed motor: 0.55 kW at 1400 rpm Coolant pump motor: 0.1 kW at 2800 rpm Longitudinal travel X: 420 mm Transverse travel Y: 250 mm Vertical travel Z: 335 mm automatic / 340 mm manual Vertical travel with optical measuring system: 300 mm automatic / 310 mm manual Clamping surface of fixed angle table: 250 × 700 mm Machine weight with vertical milling head and angle table: approx. 770 kg Weight with all accessories: approx. 1250 kg Position indicator: digital for X/Y/Z Machine vice: included Hsdpfxszw U Nfe Ak Ujnu Tool holders and collets: extensive range of accessories available Operating manual: included No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes Hjdpfx Asyrf I Aek Ujnu 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: used, Year of manufacture: 2011 Colour: White Empty weight: 3.000 kg - Year: 2011 - Serial number: 56604 - Drilling unit present: Yes Hjdpfxezy Nb Io Ak Uonu - Saw unit present: Yes - Vacuum pump present: Yes - Tools included: Yes - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 1,000 mm, total height: 3,050 mm, total length: 9,850 mm, total width: 10,145 mm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 22 W, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak PFH 5800 with the Mazak Palletech system. This horizontal machining centre is a flexible, automated production system and is suitable for unmanned production. The machine was manufactured in 2004 and is fitted with the Mazatrol 640M control system. Hedoz Rmh Ejpfx Ak Uonu Technical specifications: Pallet table size: 500 x 500 mm Number of pallets: 10 Table load: 700 kg Movement X-axis: 730 mm Movement Y-axis : 730 mm Movement Z-axis : 740 mm Table indexing: 360 x1 ° Spindle Taper: CAT 40 Spindle speed: 12.000 1/min Spindle motor: 22/15 kW Magazin capacity: 80 Required floor space: 9850 x 10145 mm We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, • Completely refurbished by us • Glass thickness: 2-12 mm • Minimum dimensions: 150 x 150 mm • Maximum glass width: 700 mm • Dimensions: L = 2400 mm, W = 1400 mm, H = 1200 mm Hsdpfx Ajz Snxbsk Uenu • Connection values: 380/50 V, 13 kW • Price available upon request

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 500 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC MSX 501 WORKING CAPABILITIES: X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm B-axis rotation: 360° Rapid traverse speed X, Y, Z: 50 m/min TABLE: Hodez H I A Uopfx Ak Ujnu Number of pallets: 2 Table dimensions: 500 x 500 mm Maximum workpiece dimensions: Ø 800 x 1,000 mm Table load capacity: 500 kg SPINDLE: Tool holder taper: ISO 50 Maximum spindle speed: 8,000 rpm Machine configuration: •120-tool magazine •Spindle connection DIN 69871 ISO 50 •High-pressure system through the spindle, 70 bar, complete with tank and paper filter •Chip evacuator •Operating manuals and CE declaration Year of manufacture: 2004

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for Hodpoz Nkutsfx Ak Usnu window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), subject to prior sale.

Condition: excellent (used), Year of construction: 1977, overall weight: 370 kg, Ayen automatic nut runner with a large number of tools. Hsdpfx Akoz Ekqlo Uenu

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Hnodpfxsz Ixlis Ak Ueu Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell. Hnodsziy Idopfx Ak Ueu

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Hnsdpfx Asz H Dwnok Uou Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: MORI SEIKI, controller model: M730BM, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, overall weight: 11,100 kg, Equipment: chip conveyor, With dual pallet, Mori Seiki M730BM control system. Hnedpfoz Sqrksx Ak Uju Workholding and tooling not included. AVAILABLE: late January/early February 2027.

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Mazak FH-5800 – Horizontal Machining Center Spindle cooling Max. 12,000 RPM Z = 660 millimeters X = 710 millimeters Y = 610 millimeters Tool magazine for 40 tools, newer control system – 2-pallet system. Hnsdpfx Asz Ehkpjk Uou

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels Hnsdpfez I Eggex Ak Usu with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly