Used Horizontal Broaching Machine for sale (66,688)

Condition: refurbished (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 60213/674, input voltage: 380 V, input current: 15 A, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, -WAG 893- For sale is a Rausch RS6/1000 internal demolition machine. Manufacturer: Rausch Type: RS6/1000 Year of manufacture: 10/1987 Machine no.: 60213/674 Knjdpfxszvwlyj Ak Aoa Weight: approx. 800 kg Tractive force: 60 kN Further information will be added shortly...

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque Kodpfszta H Iox Ak Aona - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: used, Brand and Model: URPE M200 Knodpfxjzq R Tgj Ak Asa

Condition: used, Manufacturer: Konkoly Electro Kft., Hungary Year of manufacture: 2020 Kjdozumw Nepfx Ak Aona Year of installation: 2020.12 Rated voltage: 400 V Maximum current consumption: 40 A Frequency: 50 Hz Required pressure: 6 bar Total weight: 5500 kg Noise level: < 95 dB Hydraulic pressure: Cycle time: approx. 30 sec. Changeover time: approx. 10-30 min., depending on the required tooling.

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2276, Karl Klink HW 20 Reaming Machine For sale is a functional Karl Klink HW 20 reaming machine. This machine comes from the renowned Karl Klink tool machine factory and was used in industrial applications until recently. It is suitable for precise reaming operations in single-part and series production. Technical Data Manufacturer: Karl Klink Tool Machine Factory Model: HW 20 Machine Type: Reaming Machine Year of Manufacture: 1968 Weight: approx. 5,500 kg Connected Load: approx. 19 kVA Condition Fully functional Used Inspection possible by appointment Sale due to changes in equipment Delivery FCA location Dismantling and transport by the buyer Overhead crane and forklift can be made available for loading upon agreement. Knjdpfozvf Trex Ak Aja

Condition: new, pressure 100 kN stroke 0-200 mm table-size 450 x 1000 mm working speed: 6-10 mm/ sec. Knodpfszr Rp Dox Ak Asa return speed 20 mm/sec work height max. 900 mm toolpiece height max. 200 mm total power requirement 1,5 kW bending capacity max. - round 42x3,2 mm 150x10 mm weight 320 kg dimensions 1010x480x1120 mm

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production Knedpfezr Iyyox Ak Aja – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year: 2008. * Equipment value, including zero points, chucks, BT taper chucks, turning tool chucks, and pallets: 50,000–55,000 euros. * 5-axis continuous machining center. * High-precision Heidenhain linear guides. * Interface for connecting a pallet loader and robot. * Table with turning function. * Independent high-pressure cooling system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. * Magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * Travel on the X-axis: 730 mm. * Travel on the Y-axis: 510 mm. * Travel on the Z-axis: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW. * Maximum cutting torque: 135 Nm. * C-axis table: 360,000 x 0.001 * B-axis rotation: +160 / -180 * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point adjustment. * Automatic cutting power control. * Program memory: 2 MB. * Dynamic zero-point correction (up to 8 points). * Pre-check of tool availability. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine is currently in operation. * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale. Ksdpjzuxntjfx Ak Asna

Condition: excellent (used), Year of construction: 2014, 2014 DMG MORI NHX 5000 CNC Horizontal Machining Centre with Siemens 840D SL Control High-Performance DMG MORI NHX 5000 CNC Horizontal Machining Centre, Manufactured In 2014 & Equipped With Siemens 840D sl CNC Control. The machine Has Recorded 23,262 Power-On Hours, 15,894 Spindle Hours And Is Available For Inspection Under Power. Designed For Precision Machining, The Machine Features A 12,000rpm (30kW Motor) SK40 Spindle, 2-Pallet Changer (500 × 500mm (5 'T' Slots), 40-Position Automatic Tool Changer, 1° Indexed B-Axis Table. Axis Travel 'X'=730mm, 'Y'=730mm, 'Z'=880mm. Rapid Traverse 'X,Y & Z'=60m/min. Maximum Spindle Torque 102 Nm. Twin 500 × 500 mm Pallet Changer. Maximum Pallet Load 500 kg. Maximum Workpiece Ø630 x 900mm High. Total Connected Power Load 57 kVA. S/No. 1229000053 (2014) Knedjzvcl Sjpfx Ak Aea With 40 bar High Pressure Through Coolant System, Chip Conveyor, Renishaw PP60 Touch Spindle Probe & Machine Documentation. Machine Weight Approx. 11.5 Tonnes.

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Kjdpfjzhx D Usx Ak Ajna Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Type: U3E1000 Machine no.: 17098 Year of manufacture: 1982 Data: Engine power: 3 kW Kedjzvq Axjpfx Ak Aena Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: good (used), Year of construction: 2004, For sale CNC Horizontal Machining Center HELLER MCH 250 with Robot (YASKAWA GP50 Robot) – Siemens 840D Knjdszpzyzopfx Ak Asa 4-axis For sale, a high-productivity production cell / robotic island including a HELLER MCH 250 horizontal machining center with pallet changer, fully automated with a YASKAWA Motoman GP50 loading/handling robot and its secure loading cell. Complete set, ideal for high-volume production, intensive machining of automotive, aerospace, or precision mechanical parts with automated operation / without human presence. 1. Specifications of the HELLER MCH 250 Machining Center: Brand: HELLER (Gebr. Heller Maschinenfabrik GmbH) Model: MCH 250 Year of manufacture: 2004 Numerical Control (CNC): SIEMENS Sinumerik 840D Order / serial number: 32-46258 Power supply: 400 V / 50 Hz / 123 A Included equipment: 4 axes Automatic pallet changer Large capacity tool magazine (chain / upper matrix type) Chip conveyor with KNOLL high-pressure filtration / coolant unit 2. Specifications of the YASKAWA Loading Robot: Brand: YASKAWA Electric Corporation Robot Model: MOTOMAN-GP50 Type: YR-106VX50-A00 Year of manufacture: August 2018 Load capacity (Payload): 50 kg Robot weight: 570 kg Robot cell equipment: Specific gripper / clamp Gravity-fed / drawer part station / storage unit Complete protective enclosure with housing and CE safety grilles Machines disconnected and sold as is.

Condition: good (used), Year of construction: 2011, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Table size: 400 x 500 mm Table load: 500 kg Chip conveyor Pallet changer Coolant filtration system KS high-pressure system through the spindle Knedpfezvb Tusx Ak Aea

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, documentation/manual, We offer this refurbished (REBUILT SPINDLE) Heller MC 16 horizontal machining center, manufactured in 2000. Knsdozi A Awepfx Ak Asa 4 axes Working range: Longitudinal travel of axis X 630 mm Vertical travel of axis Y 630 mm Transverse travel of axis Z 630 mm Pallet size 400 x 500 mm Max. workpiece size Ø x height 720 x 800 mm Max. workpiece weight 500 kg 6 pallets Pallet change time 9 sec. NC rotary table, tilt of axis B 360,000 x 0.001 ° Rotation speed of axis B 40 rpm Tool holder taper SK 63 Tool size Ø x length x weight 150 x 227 x 12 mm/kg Spindle speeds, stepless adjustment 45 - 24,000 rpm Feeds / rapid feeds XYZ 1 - 60,000 mm/min Feed force 10,000 nm Spindle torque 48/72 nm Spindle drive 30 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Total weight, approx. 12,500 kg Control: Unipro Manufacturer: Heller Model: MC 16 Year of manufacture: 2000 Condition: refurbished ID category: 1455 Type ID: 4161 Machine type: horizontal machining center If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl Speed : 25000 rpm Movement X/Y/Z : 200/350/300 mm Tool holder : HSK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl Travel ranges X/Y/Z:200/350/300 mm Speed:25,000 rpm Tool holder:HSK 40 Spindle: Technology:2 motorised spindles Spindle centre distance:200 mm Speed:25,000 rpm Tool holder:HSK 40 Double-swivel mount: Technology:A-axis or U-axis with counter-bearing Drive:Direct drive (torque motors) Loading module: Technology:Industrial robots Manufacturer:Fanuc Model:LR Mate 200iD Gripper:Double gripper Workpiece marking:Needle embossing station (DMC) Workpiece feed: Technology:L-shaped infeed and outfeed conveyor Workpiece carriers:20 Dimensions:190 x 150 x 15 Workpiece capacity:20 Kodpfx Akezrkn Tj Ajna Dimensions:220 x 160 x 240 mm Equipment: Tool magazine:40 positions (2 × 20) Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 80 bar Hydraulic clamping:3 clamping circuits per side Automatic rinsing cycle:Workpieces + clamping device Contact monitoring:Pneumatic Tool breakage monitoring:Inductive

Condition: used, Year of construction: 1988, A Heckert horizontal CNC machining center in need of repair is offered. Travel X/Y/Z: 800mm/560mm/805mm, tool taper: SK50, pallet size: 500mm/500mm, number of pallets: 2, max. pallet load: 800kg, tool magazine: 40, max. spindle speed: 4200rpm, control: Siemens Sinumerik, rapid traverse X/Y/Z: 24m/min, B-axis: 360°. Machine dimensions: approx. 6510mm/5115mm/2933mm, weight: approx. 16000kg. The machine could not be powered up again after a power outage. Inspection possible by arrangement. Knsdpfx Aezuzy Sek Asa

Condition: used, An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement. Knedpfxszuzzpj Ak Asa

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Knjdpszugnhofx Ak Aoa

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW Knedpfx Akexabhms Asa motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 20.0 t Ksdpfx Aoxabtvek Ajna stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm Knjdpfx Akexabhaj Aea total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 Horizontal Machining Center Spindle cooling Maximum spindle speed: 7000 rpm Z- 1000 mm Knjdpfsyuyfhex Ak Aea X- 1300 mm Y- 1100 mm Tool magazine for 80 tools 1 spindle, 2 pallets, 800x800 mm cubes, x-z-y-b, 4-axis

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools Ksdjyrf I Aepfx Ak Asna 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Knsdpfx Aeywicvok Aoa

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 horizontal machining center Max spindle speed: 7000 rpm Knjdpfxeyvf Tts Ak Aja Including spindle cooling Z-880 X-1050 Y-800 Tool magazine for 80 tools 1 spindle, 2 pallets, 500x500 mm cubes, 4-axis (x-z-y-b)