Used Horizontal Pillow Pack Wrapping Machine for sale (67,679)

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Crsdpex N Atfsfx Ab Uoa

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Credpfx Aborpn Dvj Uja Technical details shown on picture.

Condition: good (used), Year of construction: 2006, Machine is in good condition fully functional. Crjdpfjvm E R Njx Ab Uoa

Condition: good (used), Year of construction: 2004, Technical details shown in pdf document. Crjdpfx Absruq N Ie Uja

Condition: good (used), Year of construction: 2014, Machine will be delivered without conveyer belt and weighing. Csdpfx Abewt Tuhe Ujra

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl Cedpfx Absyw R Ndo Uera - Central coolant system

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling Crsdsyxhyiopfx Ab Uja • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: Csdpfx Abjw Dvkaj Uora --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, max. wheel diameter 40 mm gear width 45 mm Csdpfxeyh Rmgo Ab Uora max. module 1 clamping length max. 75 mm number of teeth 5 - 399 hob turning speeds 320 - 3200 U/min weight of the machine ca. 0,6 t Fully Automatic Gear Hobber with Loader for small gears

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm Cedpfx Aoub Amfjb Usra - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Crodpfx Absyzdywe Usa Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 770 mm z-travel 805 mm Control Heidenhain iTNC 530 spindle tunring speed 16.000 U/min spindle drive 25/32 kW torque 159/206 Nm tool taper HSK-A 63 number of tool places 40 Pos. size of pallet 400 x 400 mm numbers of pallets 2 auto power on hours ca. 38.013 spindle hours ca. 17.871 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Codpfxex Ik Tqo Ab Usra Technical Features & Accessories: - Interchangeable inserts - Chip conveyor - Internal coolant system - Tool cleaning system - Tool length measuring device - Laser measuring system for tool monitoring, Blum - Compressed air supply through the spindle center - Cleaning gun - Blow gun - Electronic handwheel, Heidenhain HR 520 - Decentralized work area extraction, 800 m³/h Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Codpfxextfz Dj Ab Uera - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Cjdpeyigaljfx Ab Usra Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) Crjdpfxjxcp R Ue Ab Uja - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop Crjdpjxcuyhefx Ab Uoa

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Crsdpfxox Apgcs Ab Uoa Stroke length: 0 – 300 mm Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Space requirement: 1250 x 820 x 1120 mm

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Crodox D H T Aopfx Ab Uea Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Cjdsywxbnjpfx Ab Uora Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Cjdpfx Aox T Ddysb Uera Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 323, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: SIEMENS SINUMERIK 840 D, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates collection within the period from 08/04/2026 to 16/04/2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Travel B-axis: 360° Pallet dimensions: 2 units, 500 x 400 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Connected load: 60 kVA Cjdpfxsyk Ulnj Ab Uora Operating voltage: 400 V Frequency: 50 Hz Rated current: 90 A Dimensions & Weight Dimensions (L x W x H): 5,000 x 5,000 x 3,000 mm Weight: 12,000 kg External reference: 25

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, workpiece weight (max.): 800 kg, Horizontal Machining Center Okuma Millac 550 H (2-pallet system) For sale: high-performance horizontal machining center Okuma Millac 550 H with dual pallet system. Designed for efficient series production, offering high productivity, reduced downtime and full 4th-axis machining capability. Ideal for demanding machining operations requiring precision and repeatability. Technical specifications: Pallet size: 550 mm Travels: X: 800 mm Y: 800 mm Z: 700 mm A-axis: 360° Spindle taper: BT50 Max. spindle speed: 10,000 rpm Tool magazine: 60 tools Credpfxjyw Rlxs Ab Uoa Max. workpiece weight: 800 kg Machine in very good technical condition, ready for operation.

Condition: used, Year of construction: 2007, (2007) Matsuura HPlus 300 PC11 CNC Horizontal Pallet Changing Machining Centre With Matsuura G-Tech 30i Contro Crjdpfxsyw Thce Ab Uja Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=560mm, 'Z'=500mm, 'B'=0-360° (0.001° Increment). Distance Spindle Nose To Table 80-640 mm. Rapid Traverse 'XYZ'=60,000mm/min, 'B'=100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT 40. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950 (2007). Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Quantity Of Pallets With Tombstones, Spin Window, Hand Wheel, Signal Tower, Full Manuals, Tool Holders, Back Up CD/USB & Maintenance Records. New Spindle 18 Months ago at a cost of £20,000. Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice).

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec Csdjx Hpytepfx Ab Uora feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer Crsdpfex Hpymsx Ab Uea - WITHOUT clamping towers