Used Hsc Milling Machine for sale (65,558)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Gkedpfxozr Hd Re Af Aoa

Condition: refurbished (used), functionality: fully functional, Refurbished milling head from Pfauter PE150. Gkedjzr Hc Tspfx Af Asa

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm Gkjdpoztzngefx Af Aea - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: good (used), Year of construction: 1987, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,200 mm, overall weight: 1,800 kg, workpiece weight (max.): 400 kg, 3 Axis digital read out Active digital read out Fixed table 800 x Central lubrication Coolant system with pump X-Axis: 500mm Y-Axis: 400mm Gkodpfx Aszdf Efsf Aea Z-Axis: 400mm Table Length: 800mm Table Width: 460mm Table load: 400 Spindle speeds: 2500Rpm Feed rate X-Axis:1300mm/min. Feed rate Y-Axis:1300mm/min. Feed rate Z-Axis:1300mm/min. Stroke pinole: 90mm Length: 2200mm Width: 2100mm Height: 2100mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2003, condition: good (used), DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Gkodpjztl Hmjfx Af Aea Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual Gjdpezr Hrzofx Af Ajka

Condition: refurbished (used), Year of construction: 2005, operating hours: 80,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, position of the milling head: Orthogonal, spindle speed (max.): 2,200 rpm, spindle speed (min.): 22 rpm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 22 rpm, year of last overhaul: 2026, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, Used SHW UF 6L – Universal Milling and Drilling Center Year of manufacture: 2005 Machine no.: XXXX Partially overhauled in 2026 High-performance SHW universal milling center with a large working area, automatic universal milling head, Heidenhain iTNC 530, and extensive equipment. Technical main data Travel ranges X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,600 mm Automatic universal milling head Gksdoztqylepfx Af Aoa CNC-controlled, swivels in two planes Milling head mount: 360 × 1° Milling head: 180 × 1° A total of 64,800 programmable head positions Tool mount: SK 50 / DIN 69871 Hydromechanical tool clamping Oriented spindle holder 360 × 1° Main spindle Drive power: 40 kW at 100% ED Max. power: 56 kW at 40% ED 2-stage gearbox Speed range: 22–3,200 min⁻¹ Feeds X-axis: up to 20,000 mm/min Y/Z-axis: up to 24,000 mm/min Digital AC feed drives Direct linear measuring systems CNC control HEIDENHAIN iTNC 530 External electronic handwheel HR 420 Second control panel in front of the machine Equipment Electro-mechanical leveling system for the spindle stock Traveling work platform with CNC control panel Pick-up tool station for 10 tools Max. tool weight: 25 kg Max. tool length: 400 mm Wireless measuring probe, 3-dimensional 1-channel collision monitoring Internal and external coolant supply Coolant pressure up to 16 bar / approx. 32 l/min Coolant/air switching Paper band filter system Coolant tank approx. 800 l Oil cooler for the spindle stock Hinged belt chip conveyor Impulse central lubrication system Traveling control cabinet Fixtures incl. foundation anchor bolts Connection data 400 V / 3 phases / 50 Hz Connection power approx. 80 kVA Fuses 160 A Compressed air 4–6 bar Robust SHW universal milling center with an 8,000 mm X-axis travel, a powerful 40 kW main drive, and an automatic universal milling head – suitable for the flexible machining of large and complex workpieces. Accessories such as a dividing head table and rotary table available upon request. Automatic tool changer (ATC) available upon request. Images are sample images.

Condition: used, Year of construction: 2007, saw-blade dia. 250 mm Gksdjztrwlopfx Af Asa turning speeds 2800 U/min pressure 6-7 bar weight of the machine ca. 273 kg

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Gkjdpfx Asvw Ectof Aja Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Milling machine Hans Schreiner HS-MX5110T, very good condition, 2.2 kW motor power, approx. 160 kg. Gkodpfex H Uh Ajx Af Aoa Prices subject to change; errors, misprints and typographical mistakes excepted.

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Gkedpfx Afox H Ufbj Aea Prices subject to change, errors and misprints excepted.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm Gkedpfx Afozru Hae Aja z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm Gsdpfezruwlox Af Aeka tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Gksdpezrt Rkofx Af Aoa

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11876, travel distance X-axis: 1,524 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 584 mm, quill travel distance: 127 mm, quill diameter: 105 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 40 rpm, table width: 355 mm, overall weight: 3,750 kg, table load: 850 kg, XYZ SMX 5000 CNC Bed Type Milling Machine Model: SMX 5000 S/No.: 11876 Year: 2013 Control: ProtoTrak SMX Godpfx Afsznkkao Aoka Table Size: 1930 x 355mm Travels (X,Y,Z axis): 1524 x 596 x 584 Quill Diameter: 105mm Max. Quill Travel: 127mm Spindle Taper: 40 ISO Spindle Speed Range: 40 – 5000 RPM Spindle Motor Power: 7.5 HP Max. workpiece weight: 850 kgs

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Gedpfxjx H Uigs Af Ajka Price changes reserved; errors, misprints and typographical mistakes excepted.

Condition: good (used), Year of construction: 1986, Mikron milling machine WF 51, manufactured in 1986. Control system: Heidenhain TNC 155 Tool holder: SK 40 Gsdpfjzr Ubwex Af Aska Spindle stroke: 110 mm Table size: 1000 x 500 mm Travel distances: x-710, y-500, z-460 mm Spindle speed: 31.5-3150 RPM

Condition: good (used), Year of construction: 1985, Mikron milling machine WF 31 C Year of manufacture: 1985 Gjdpfx Aezr Ua Hsf Aeka Equipped with Heidenhain TNC 155 control system In good condition.

Condition: good (used), Year of construction: 1995, Mikron UME 600 Year of manufacture: 1995, Digital control: Heidenhain TNC 407 Spindle stock as per specifications Godpfxezr T U Ao Af Aoka X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle speed: 5 - 5000 rpm Quill travel: 90 mm Total power consumption: 9 kW Feed rate range: 0-10,000 mm/min Machine weight: approx. 3260 kg Space requirement: approx. 2200x2800x2000 mm Spindle: 6 kW Vertical milling head with hydraulic tool clamping system SK 40

Condition: good (used), Year of construction: 1974, functionality: fully functional, * 3-axis digital readout (Heidenhain) * Adjustable vertical milling head with quill adjustment * Additional horizontal spindle * REPAR 2 safety device * Machine light * Anti-vibration mounts x-travel 500 mm y-travel 300 mm z-travel 380 mm table surface area 800 x 420 mm table load capacity 400 kg tool taper ISO 40 spindle turning speed range 40 - 2000 rpm feeds longditudinal/cross/vertical 10 - 500 mm/min Godpfozrm Snox Af Aeka rapid traverse 1500 mm/min main drive 3 kW weight of the machine approx. 1,3 t Transport dimensions: The machine is loaded onto a heavy-duty pallet; Dimensions: 1800 x 1100 x 2100 mm (length x width x height)

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2Lb, directly from the seller Technical data: >> Machine no. 0793 >> Fixed angular table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 8 to 400 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: approx. 2.2 kW >> Travel ranges X/Y/Z: 800/300/400 mm (Y travel can be extended by another 200 mm) >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> Central lubrication >> Modification of the control cabinet About the machine: Offered is a used universal milling machine Deckel FP2Lb in working condition. The machine comes directly from the seller and is sold as is. The vertical head can be moved by 200 mm to enable an even larger working area. A central pump ensures the lubrication of the various axes. A special feature of this machine type is its basic design; it is a machine with an inclined table bed. The movement processes are assigned to the work spindle and thus to the tool. Different workpiece weights do not affect the axis movements. Take advantage of the opportunity to inspect and test the machine on site while it is powered up. The Deckel is sold as a source of spare parts, without inspection and without warranty. Gkedpfeztav Ajx Af Aoa

Condition: used, Year of construction: 2021, Milling machines Travel distance X: 550 mm Travel distance Y :550 mm Travel distance Z: 510 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Siemens Sinumerik 828D spindle chuck: SK40 DIN 69871 spindle revolutions: 10000 rpm Godpfx Afezrvgue Aeka Speed range from: 20 U/min Speed range to: 10000 U/min table size X: 850 mm table size Y: 650 mm max. workpiece weight: 600 kg tool changer: 24 - time input Power : 13 kW Torque: 64 Nm Rapid traverse: 24 m/min feed rate: 24000 mm/min spindle cooling chip conveyor control Siemens 3 Axes Infrared Touch Probe System Tool Measurement System

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 2500 x 700 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 800 mmZ axis traverse: 800 mmVertical capacity (VC): 22 / 822 mm Milling head Head type: Manual universal long nose head (Option: new automatic milling head UDG 2,5º)Tool clamping system: HydraulicTaper nose: ISO-50 (DIN 2080)   /   Pull stud: DIN 69872Speed range: 4000 rpmSpindle power: 22 kW Feedrates Working feedrate: 5 - 5000 mm/minRapid feedrate (X,Y,Z): 12000 mm/min Weight and dimensions Maximum weight on table: 4000 kgMachine weight approximate: 9500 kgMachine dimensions approximate: 6605 x 3315 x 2730 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Gsdszq H Ugjpfx Af Aeka

Condition: used, Year of construction: 2007, x-travel 660 mm y-travel 350 mm z-travel 450 mm Control Ultimax In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine is operational. The X-axis ball screw is making noise Gedpfxszrh Rls Af Aeka and should be replaced soon. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Brand and Model: CORREA CF 22/25 Cnc: HEIDENHAIN TNC 426 Type: BED TYPE Table dimensions: 2500x700 mm Max allowed weight on table: 4000 kgs Traverses (X,Z,Y): 2500x800x800 mm Milling head model: U22 manual Spindle cone: ISO 50 Speed range: 4000 rpm Power: 22 kw Feedrates: 5-5000 mm/min Gkedpfxjzq Rzqo Af Aja Rapid traverses (X,Y,Z): 12000 mm/min Machine weight: 9500 kgs Machine dimensions: 6400x3345x2800 mm Machine equipped with: -Optical encoders on the X,Y,Z axes – Electronic wheel – Hydraulic cone clamping pedal