Used Hungary for sale (839)

Year of construction: 2017, condition: new, functionality: fully functional, ----- Dsdpfxjyly R Es Acpjcn

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Center height: 400 mm Swing over bed: 815 mm Swing over cross slide: 480 mm Swing in gap: 1000 mm Length of gap: 300 mm Distance between centers: 3000 mm Speed range: 5.6 – 1120 rpm Number of speed steps: 24 Tool cross-section: 40 x 40 mm Spindle bore: Ø 72 mm Bed width: 490 mm Tailstock sleeve taper: Morse 5 Tailstock sleeve travel: 250 mm Metric threads: 0.5 – 48 mm (35 steps) Inch threads: 48 – 7/16 TPI (42 steps) Module threads: 0.25 – 24 Module (30 steps) Dsdpjy N Rg Hsfx Acpjcn Diametral Pitch threads: 96 – 7/8 D.P. (42 steps) Circular Pitch threads: 1/16" – 3" C.P. (29 steps) Dimensions (LxWxH): 4860 x 1360 x 1555 mm Weight: 4600 kg Accessories and Equipment: - 2-axis digital readout (DRO) - 3-jaw chuck - Steady rest - Machine lamp - Coolant system - Rapid traverses - Chuck guard - Manual on hungarian - Original mfg cca. 1980 Condition:The lathe is completely overhauled. Available immediately.

Condition: used, Year of construction: 1992, turning diameter over bed 320 mm turning diameter over slide rest 180 mm turning length 1000 mm turning diameter in the gap 460 mm turning speeds 70 -2000 U/min centre height 160 mm spindle bore 27 mm Dcedezyvaqopfx Acpjn total power requirement 2,0 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling System PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period for the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mounting: SK 40 according to DIN 69871 Part 1 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Djdpfx Acoz I Tcispocn Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter, front: 80 mm Spindle bearing inner diameter, rear: 55 mm Tool clamping: DIN 69872 Form A or B Clamping force SK 40: 9 kN Permissible tool diameter with adjacent positions occupied: 80 mm Permissible tool length with adjacent positions occupied: 315 mm Permissible tool diameter with adjacent positions free: 160 mm Permissible tool length with adjacent positions free: 315 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Swiveling axis A Swiveling angle towards the working spindle: +120° Swiveling angle away from the working spindle: −120° Torque of the swiveling axis: 3,400 Nm Holding torque of the swiveling axis: 3,400 Nm Holding torque of the swiveling axis with hydraulic clamping: 6,200 Nm Rapid traverse of the swiveling axis: 40 rpm Feed rate of the swiveling axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of the swiveling axis A: A ≤ 9 arc seconds Permissible moment of inertia of the swiveling axis: max. 59 kg·m² Rotary axis C Rotational range of the C-axis: 360° Torque of the rotary axis: 2,000 Nm Holding torque of the rotary axis: 2,000 Nm Feed rate of the rotary axis: 7,200°/min Bidirectional accuracy of the rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of the rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: used, Year of construction: 2008, Hurco VMX 30 T vertical machining center 3-axis Year: 2008 Dcsdoz I Sx Nspfx Acpsn Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - Through spindle coolant - software options Under power in our warehouse.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table length: 850 mm, Agie Charmilles Spirit 3 tömbös szikraforgácsoló (akár bérbe is) AKCIÓS ÁR: 9.900,- EUR + Áfa (Régi ár: 17.500,- Eur+Áfa) A gép hibátlan. Folyamatosan szervizelt a hivatalos magyarországi márkaszerviz által. 2009-ben, újonnan került beszerzésre a Galika GmbH-tól. A gépet első perctől kezdve ugyanaz a két dolgozó üzemeltette és tartotta karban. A gépen kopó alkatrészeket, egyes meghajtó motorokat, csapágyakat cseréltek az évek során. Gyártási év: 2008 Integrált C-tengellyel és integrált elektróda tárral Vezérlés: multitasking operációs rendszerrel és objektum orientáltgrafikus kezelő felülettel ( AEP Spirit ) Asztalméret: 850×650 mm Mozgástartomány: X:550 Y: 400 Z: 350 Gépméret: 1800x1900x2200 mm Dodpfx Acoz I Tivjpecn

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1217, input voltage: 380 V, power: 34.8 kW (47.31 HP), input frequency: 50 Hz, We offer this ready for use Gubisch BS2000 planer and moulder, year of construction 1972. Serial number: 1217 Voltage: 380 V Frequency: 50 Hz Power consumption: 34.8 kW Working width: 200 mm Djdpfxez Hac He Acpecn Planing height: 120 mm Number of spindles: 6 Bottom spindles: 2 Right spindles: 2 Left spindles: 1 Top spindles: 1 Spindle configuration: b-r-l-r-t-b Spindle rotation speed max: 6.000 rpm Spindle diameter: 40 mm Feedrate max: 30 m/min Continuously variable feed: Yes Feed motor: 2,2 kW Main motor power: 5,5 kW Chip rabbet cutter: No Seperate motor per spindle: Yes Motoric adjustment: Planing height Infeed table length: 3.500 mm Lubrication pump: manually First infeed roller controlled: Yes Type of feed roller drive: Cardanic Total connection: 23 kW If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree Dcodpfeyxpprjx Acpon TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AB / 162765, overall weight: 1,410 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, We offer this used SCM COMPACT XL 4-side planer, year of construction 2004. Serial number: AB/162765 Year of manufacture: 2004 year Weight: 1.410 kg Nominal voltage: 400 V Phases: 3 Current: 33 A Frequency: 50 Hz Short-circuit current: 10 kA Dsdpfxsz Hacys Acpscn If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, Overview Property Specification Value Capacity 700 Liters (24.7 cu. ft.) Storage Capacity Up to 528 standard 2-inch cryoboxes Temperature Range −86 °C to −50 °C Internal Dimensions (W×D×H) 890 × 605 × 1300 mm Dcjdpjz Ikq Refx Acpsn External/Housing Dimensions (W×D×H) 1110 × 938 × 1966 mm (approx. 44 × 37 × 77 inches) Weight 288 kg (approx. 700 lbs) Electrical Supply 230 V, 50 Hz (EU configuration) Noise Level 47 dB(A) Key Technical Features • Thermal Insulation: High-efficiency VIP (Vacuum Insulation Panels) combined with polyurethane foam. • Green Refrigerants: Environmentally friendly R-290 and R-170 natural cooling agents. • Power Outage Security: Long warm-up time; samples remain completely frozen for >30 hours during a system failure or power loss. • Warm-up Profile: Takes 360 minutes to rise from −86 °C to −50 °C without load. • Chamber Configuration: Includes 3 adjustable stainless steel shelves, creating 4 separate inner compartments with insulated inner doors. • Access Control: Ergonomic outer handle integrated with a secure key lock. • Data Connectivity: Built-in USB and Ethernet interfaces to facilitate seamless sample tracking data transfer. • Compliance & Certifications: ENERGY STAR® certified, ISO 14001, UL, cUL, and UKCA marked. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2016, operating hours: 622 h, functionality: fully functional, machine/vehicle number: AC27-088 86550, number of ink cartridges: 6, color channels: CMYK + Lc + Lm, number of print heads: 24, resolution (max.): 900 dpi, total length: 8,500 mm, total width: 2,200 mm, total height: 2,080 mm, space requirement length: 13,000 mm, space requirement width: 10,000 mm, space requirement height: 2,500 mm, counter reading (color): 622,000, type of input current: three-phase, input current: 37 A, input voltage: 400 V, working width: 5,000 mm, Durst Rho 512R – 5 m Industrial UV Roll-to-Roll Printer The Durst Rho 512R is an industrial 5-metre UV inkjet roll-to-roll printer designed for high-volume production of banners, mesh, textiles, billboards and other flexible media. Year of manufacture: 2016 Total printed area: approx. 622,000 m² Colour configuration: CMYK Current status: In production In 2023, the machine underwent a complete factory refurbishment at the Durst factory. Throughout its entire operating life, the machine has been covered by a Durst service contract. Servicing, maintenance and repairs have been carried out by Durst factory-trained service engineers. The printer is currently in production and is in very good technical condition. Key technical specifications: Printing technology: UV inkjet, roll-to-roll Maximum media width: 5.2 m Maximum print width: 5.0 m Printheads: Durst Quadro Array 12M Drop size: 12 pl Maximum production speed: up to 350 m²/h Technology: Durst Variodrop Ink type: UV-curable Rho Roll Ink Colour configuration: CMYK Multi-roll capability: up to three 1.6 m rolls simultaneously Printing mode: continuous roll-to-roll production Textile option: suitable for mesh printing without liner Dcodjz Iz Sxepfx Acpon Border cutter: integrated Decommissioning and loading onto a truck can be organised. Installation and operator training are available upon request. For further technical specifications, please refer to the attached data sheet. Complete Durst factory refurbishment in 2023. Full Durst service history since installation.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 6785, spindle speed (max.): 4,000 rpm, spindle speed (min.): 4,000 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, input voltage: 380 V, input frequency: 50 Hz, We offer this ready for use Gubisch BS170/3 planer and moulder, year of construction 1990. Dedpjz Han Aefx Acpjcn Serial number: 6785 Voltage: 380 V Frequency: 50 Hz Speed: 4000 rpm Construction year: 1990 year If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: H345, type of input current: three-phase, Equipment: documentation/manual, MPS EF330-6 UV flexographic label printing press, year 2008, machine no. H345, with approx. 30 million metres. The press was previously used for aluminium lid stock printing in Switzerland. Main equipment: - 6-colour UV flexographic printing press - GEW UV curing system: 5 × VCP + 1 × E2C, 6 e-Bricks - Heavy-duty unwind and rewind - 6" plus 3" unwind shafts, and 3" rewind air shaft Dsdpfxsz Itb Sj Acpjcn - Roll lift on unwind and rewind - BST web guide with ultrasonic sensor - BST Powerscope web inspection - Vetaphone corona treater - Double-sided Teknek web cleaner - Automatic servo register - Rotary die-cutting station + Kocher & Beck GapMaster - FST edge trimming with two crush knives - 6 anilox rollers - 7 magnetic cylinders + 42 print cylinders mady by Spilker, covering repeats from 8" to 13.25" The machine has a documented service and maintenance history, including the original MPS installation documentation, GEW UV servicing, Bosch Rexroth servo maintenance and BST web-guide upgrade. Current condition: The press is operational and can be inspected under power. The Cool Master process chiller currently requires repair and is not in service. The GapMaster requires re-synchronisation following replacement of a support cylinder bearing. There is no known mechanical defect; adjustment requires the appropriate setup gauge.

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit Dedoz E S E Repfx Acpscn - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: ready for operation (used), Year of construction: 2007, Hurco VMX 30 T vertical machining center 3-axis Year: 2007 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Dodpez H Nvisfx Acpjcn Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - software options Under power in our warehouse.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 589-03, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, power: 8.5 kW (11.56 HP), pressure: 6 bar, year of last overhaul: 2024, Glass grinding and polishing machine with 5 wheels. In normal, working condition. Dsdpfxey Sw Ngj Acpjcn 5 Wheels Thickness 4 - 25 mm Min. dimensions 80x150 mm Speed 0,5-4 m/min. Power supply: 400V

Condition: used, Year of construction: 2008, operating hours: 10,000 h, functionality: limited functionality, overall weight: 6,000 kg, rotor diameter: 400 mm, number of blades: 20, total length: 3,500 mm, total height: 2,300 mm, total width: 1,500 mm, rotor width: 1,200 mm, power: 75 kW (101.97 HP), type of input current: DC, rotational speed (max.): 82 rpm, input voltage: 400 V, CMG 1200 shredder for sale. Dodpfx Acoz Ag Hyjpecn

Condition: good (used), Year of construction: 2012, operating hours: 15,796 h, Maximum pressure: 8 bar Delivery rate: 18.4 m3/h Rated power: 110 kW Compressor mains voltage: 400 V / 50 Hz Dryer mains voltage: 400 V / 50 Hz Dsdpfx Aoy Tui Tecpscn Compressor has been regularly maintained; has been out of operation for 2 years.

Condition: excellent (used), functionality: fully functional, overall weight: 3,500 kg, power: 52 kW (70.70 HP), table width: 1,350 mm, workpiece width (max.): 1,350 mm, 1. Cross-belt sanding 2. Segmented sanding pad The machine is in the excellent condition shown in the photos. It can be tested and works perfectly. Dsdpfez E Ig Dox Acpscn

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Djdpfx Aezl D Dnocpscn Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm Dsdpfx Acszlxp Sspjcn The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Konica Minolta bizhub 308e for Sale Several units are available from stock under 70K counters. Dcodjz I Aawspfx Acpen Main features: - Black & white multifunction printer – print, copy and scan - A3 / A4 - Up to 30 ppm A4 / 15 ppm A3 - Automatic duplex printing - Up to 1,200 × 1,200 dpi print resolution - 9" colour touchscreen - Optional high-speed dual scanning up to 160 opm konicaminolta.ua The machines are in good condition, fully tested and cleaned, and delivered ready for use. For any questions or further information, please feel free to contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: X-Wine 3, operating hours: 824 h, overall weight: 850 kg, This machine has been used in a professional winery environment and has been carefully maintained according to the manufacturer's recommendations. The filter is in excellent working condition and ready for immediate use. Djdpjz Dvzgofx Acpocn The Bucher Flavy X-Wine 3 provides efficient and gentle wine clarification while preserving wine quality and minimizing product losses. An ideal solution for wineries looking for a reliable, modern crossflow filtration system without the lead time and cost of a new unit.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 8,000 kg, Hundegger SC1 Year: 2005 It is being sold in excellent condition as seen in the pictures. Dodpfjzzx Dbsx Acpocn We will help you disassemble and load the machine.

Condition: used, Konica Minolta C3070L on SALE Dcedpfx Acoz Iy Aispsn Total count: 363,000 prints Options: E400-05, FS612 The machine is in good working condition and ready for use. If you are interested or have any questions, please feel free to contact us. We will answer any questions and provide additional information.