Used Hurco Vmx 30 for sale (156)

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Rjdpfok Iugzjx Ab Rjch

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control HURCO WINMAX (Graphics, Touchscreen) Max. swing diameter 335 mm Max. turning diameter 305 mm Rodpfx Abe Agadke Rjch Distance between centers 477 mm Spindle bore D52 mm Chuck size 203 mm Turret 10 stations (BMT) Spindle speed 4,800 rpm Power 11/14 kW Machine weight approx. 3,950 kg Dimensions approx. 3,000 x 2,300 x 2,000 mm Accessories - Hydraulic tailstock - Coolant system - Built-in tool setter - Workpiece chuck - D200 3-jaw hydraulic chuck with jaws - Parts catcher - Machine lamp - Chip conveyor The machine is in very good condition. It can be inspected under power from calendar week 46 (CW 46) in our showroom.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V Rodpfx Aboydqpio Rjch connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader. Machine comes with 3 jaw chuck, tool set arm, chip conveyor and single piece extraction.

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Rcedpfoy Tx Nqox Ab Reh

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Rjdpfxezvd U Us Ab Rjch Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] Rcodjuhbubspfx Ab Rjh - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] - Machine weight : 3360 [kg] MACHINE HOURS - Number of working hours : 22000 [h] EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Condition: ready for operation (used), Year of construction: 2007, operating hours: 117,713 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,770 mm, table width: 3,750 mm, overall weight: 6,650 kg, product length (max.): 4,535 mm, This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 vertical machining centre we have for sale. Contact us for further details. • Spindle Nose to Table: 150 – 760 mm • Feed Rate Programmable: 3 – 7600 mm/min • Feed Rate via Console: 3 – 11400 mm/min • Rapid Traverse X/Y/Z: 35 / 35 / 30 m/min • Guideways: Linear guideways (X, Y, Z) • Positioning Accuracy: ±0.01 mm • Repeatability: ±0.005 mm • Table Size: 1270 × 610 mm • T-slots: 5 (DIN 650) T-slot • Width: 18 mm • Distance Between T-slots: 100 mm • Maximum Table Load: 1100 kg • Automatic Tool Changer Type: Drum magazine • Number of Tool Positions: 24 • Maximum Tool Diameter: 80 mm • Maximum Tool Weight: 7 kg • Maximum Tool Length: 300 mm • Tool Holder: SK 40 (DIN 69871) • Pull Stud: ISO 7388/II Type B • Coolant Tank Capacity: 340 liters • Machine-Specific Data • Spindle Drive Power (Continuous): 18.0 kW • Maximum Torque: 720 Nm • Torque at 1 min ED: 237 Nm • Spindle Speed Range: 10 – 12000 rpm • Mount Position (Assembly) • Measuring System: Photoelectric • Standard: Rotary motor encoder • Central Lubrication System: 1 pump (X, Y, Z) • Electrical Connection: 38 kVA / 55 A • Voltage: 400 V Rsdpfsynil Rsx Ab Rsch • Compressed Air Connection: 6 bar / 0.3 m³/min

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t Rodpfx Abeu Iddnj Rech dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Rsdpfx Aeziu Hzjb Rech Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: used, Hurco TM6i, 2 Axis CNC Lathe, Year 2013, Tailstock, Collet Chuck, Swarf Conveyor, Air Bench Filtermist, Hydrafeed MSV 65 Bar Feed Unit, with 3 Jaw Chuck Hurco TM6i CNC turning centre with slant bed design. Compact and reliable CNC lathe suitable for precision machining, subcontract engineering and production work. The Hurco TM6i CNC Turning Centre is a compact slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, toolroom and general manufacturing applications, the machine offers a practical solution for a wide range of turning requirements. Manufactured by Hurco, a respected builder of CNC machine tools, the TM6i is designed to provide reliable performance, machining accuracy and operator-friendly operation. Its rigid construction and compact footprint make it well suited to both production environments and smaller engineering workshops. The machine is capable of producing a wide variety of precision components and represents an excellent opportunity to acquire a quality CNC turning centre from a recognised manufacturer. Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 15.94" Machining Length: 13.4" Rcsdpfo Aggphex Ab Rsh Chuck Size: 6.65" Bar Capacity: 1.75" Power: 17.5 hp Max RPM: 6,000 RPM Turning Dia: 12.4"

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rcsdpfoz Ei Amsx Ab Rjh Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger Redpsz Hayrjfx Ab Roch

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Rcodpfe Afwwbjx Ab Reh Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Control system: Hurco Ultimax Machine weight: approx. 3,200 kg EQUIPMENT 16-position tool changer Various accessories

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Rcsdpfx As Ad Efnjb Roh Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 73,420 h, controller manufacturer: HURCO, controller model: Ultimax, This 3-axis Hurco VMX 24 was manufactured in 2004, featuring a robust CNC control system, HURCO Ultimax. It offers a table size of 760 × 510 mm with a load capacity up to 850 kg. The spindle can reach speeds up to 15,000 rpm, and the machine includes a 24-position automatic tool changer. Ideal for detailed milling operations. Contact us for more information about this machine. Rcedpfx Abeyb Da Ao Reh

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. Rcedezcpu Iopfx Ab Roh The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! Rsdpfozgt U Ssx Ab Rjch TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: used, Year of construction: 2020, operating hours: 13,674 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 640 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 4,211 h, spindle nose: SK 50, Horizontal Machining Center Manufacturer: HURCO Model: HMX 500 Ti Year of manufacture: 2020 Control system: Ultimax Rodpfszbmzvex Ab Rjch Technical specifications: - X-travel: 810 mm - Y-travel: 610 mm - Z-travel: 640 mm - B-axis: 360° - Spindle speed: 8,000 rpm - Drive power: 56 kW - Tool holder: SK 50 - Rapid traverse: 45/40/45 m/min - Power-on hours: approx. 13,674 h - Spindle hours: approx. 4,211 h Equipment & accessories: - Internal Coolant Supply (ICS) 40 bar - 2-station pallet changer (500 mm x 500 mm) with tombstone and zero-point clamping system (Quant) In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,400 h, travel distance X-axis: 520 mm, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details. Rcedpfx Asz Hzbdob Rsh - AC Volts: 400 V- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 9 KVA / 12 AMP- Full Load: 34 KVA / 49 AMP- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 20 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Diagram No.: 003-4610-110- Control Unit / Software: WinMax (System Konfiguration)- Additional Equipment: Chip conveyor, Spaleck finishing unit/container, compressed air/coolant system line

Condition: good (used), Year of construction: 2013, Travel ranges (working area) X-axis: 660 mm Y-axis: 406 mm Z-axis: 508 mm Spindle nose to table: approx. 102 to 610 mm Coolant system Rcjdpfx Aez Nktvsb Rjh Feed rate / rapid traverse (X / Y / Z): 28 / 28 / 28 m/min Tool changer: Magazine for up to 24 tools (SK40) Max. tool weight: 7 kg

Condition: used, Year of construction: 2016, Milling machines Redpfjzwnfysx Ab Rech Travel distance X: 661 mm Travel distance Y :407 mm Travel distance Z: 508 mm Number of axis: 3 milling machine / machining center Control: Hurco Max 5 / WinMax spindle chuck: ISO 40 / DIN 69871 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 762 mm table size Y: 406 mm max. workpiece weight: 1500 kg tool changer: 20 - time input Power : 11 kW Torque: 72 Nm Rapid traverse: 28 m/min spindle cooling chip conveyor CNC vertical machining center HURCO VM10i, year 2016, equipped with HURCO MAX 5 control and WinMax software. Travels X/Y/Z: 661 x 407 x 508 mm. Table size: 762 x 406 mm, max. table load 1,500 kg. Spindle speed up to 10,000 rpm, spindle power 11 kW, torque 72 Nm, ISO 40 tool holder. 20-position automatic tool changer, rapid traverse 28 m/min, coolant system and chip auger

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Rcodpfx Abjzwwndo Roh Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler Rcsdpfx Abozv Rgwo Rjh The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Rcedpfx Asz Hzbqsb Reh Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Rcedpoyap Tfefx Ab Rsh Workpiece measurement Tool measurement High-pressure coolant (IKZ)