Used Hydraulic Tapping for sale (15,096)

Condition: used, Hydraulically shiftable gearbox for changing rotation direction Hydraulic reversing gearbox from lathe Year of manufacture approx. 1985 Change gearbox for quick reversal of rotational direction to right or left - electric hydraulic pump for hydraulic pressure generation (380 Volt, 0.25 kW) - 2 solenoid valves for switching from right-hand to left-hand rotation - fitted with pulleys Ø 230 and 200 mm - was operated with a 15 kW drive motor, enables rapid change of direction with high torque transmission - drive motor always runs to the right, gearbox is hydraulically shifted to right, left or set to neutral without activation Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg Good condition Kododz Sp Depfx Ab Tedh

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Kdsdpfxsr I E Its Ab Tsh Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Kdsdpfx Abjdzp Trs Tsh Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition Kjdpfx Ajdzp Tceb Tsdh

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: - ELGO control unit type P50 Kdjdpsyk Dhxofx Ab Toh - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - Angle stop Operating instructions

Condition: good (used), Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 280 watts -Max. cutting capacity: M8 Kdedpfx Abob A N Iij Tjh -Connection: 230 volts -Weight: 2.5 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: FAG, hydraulic pump, hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Price: per piece Kjdpfx Ashmgzwsb Tjdh -Dimensions: 660/170/H200 mm -Weight: 6.8 kg/pc.

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Kdsdexabvqopfx Ab Tsh Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: Kdodpfoxaaghsx Ab Tsh - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, pressure 100 t stroke 334 mm daylight - vertical max. 989 mm daylight horizontally max. 990 mm feed under pressure 2,1 mm/sec speed 10,0 mm/sec dimensions 1400 x 1000 x 1900 mm Hydrajust positioning device enables height adjustment of the lower section Double-acting cylinder Kdodpfx Aoyk Ifneb Tsh

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm -Mount: Bore Ø 40 mm Kedpfxsfrzrps Ab Tedh -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece

Condition: excellent (used), functionality: fully functional, installation height: 500 mm, pressing force: 120 t, table width: 600 mm, table length: 1,000 mm, operating speed: 59 mm/s, overall weight: 6,000 kg, reverse speed: 180 mm/s, distance table to ram: 800 mm, clearance between the columns: 850 mm, stroke length: 300 mm, operating pressure: 290 bar, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Kodpfjylk Eaex Ab Tsdh

Condition: used, Year of construction: 1990, pressure 63 t stroke 250 mm throat 280 mm dayligth 400 mm table surface area 650 x 520 mm table height over floor 830 mm ram surface 500 x 390 mm feed down 100 mm/s feed up 465 mm/s working feed 25 mm/s Kdedpfx Ajylzzfeb Teh oil volume 650 l power requirement 24,0 kW Weight 4,8 t dimensions of the machine ca. 1,5 x 1,9 x 3,4 mxmxm SPECIAL DEAL as is where is - as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1986, pressure 63 t stroke 160 mm throat 270 mm dayligth 360 mm Kdodpjylzwgefx Ab Teh table surface area 560 x 490 mm table height over floor 850 mm ram surface 450 x 360 mm oil volume 360 l power requirement 23,0 kW Weight 4,60 t dimensions of the machine ca. 1,2 x 1,8 x 2,9 mxmxm hole in the table 280 x 190 mm SPECIAL DEAL as is where is, electrical control defective WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) Kdjdpfowvva Sox Ab Teh with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm Kdodpovzxrpsfx Ab Tsh table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW Kdjdpfx Absvuucko Tjh weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm Kdjdpovut Rmofx Ab Toh table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Kjdpfx Abevut H Is Tjdh

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s Kjdpfxevzxphe Ab Tjdh feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, power: 30 kW (40.79 HP), total length: 3,600 mm, total width: 2,350 mm, total height: 2,400 mm, empty load weight: 17,000 kg, workpiece length (max.): 3,100 mm, Type: DS Zware schaar met anti-torsiesysteem! hydraulische zwenkbalk Elgo digitale uitlezing Strokes/min: 5 > 9 str/min Adjustable cutting device: 2°30' Kjdpfsykcpzjx Ab Tedh Number of sheet holders: 15x

Condition: used, functionality: fully functional, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, LVD Shear Type HSL 40/12.7 Capacity 4x12 mm Year 1991 Weight 14,000 kg Kedoykk Acjpfx Ab Tjdh

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Technical Data Manufacturer: LOTZE Model: KSHY 20 Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Equipment • Angle stop Kodpfx Abjwtyqie Tedh • Support arms • Manual rear gauge 400 mm All details without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Kdodpfxev Taiaj Ab Tjh Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: used, Year of construction: 1991, pressure 6,3 t stroke 300 mm throat 300 mm dayligth 800 mm table surface area 450 x 400 mm table height over floor 700 mm ram surface 50 mm oil volume 90 l power requirement 5,5 kW Weight 1,35 t dimensions of the machine ca. 1,8 x 2,0 x 2,7 mxmxm hole in the table 80 mm SPECIAL DEAL Kdjdjylcmvopfx Ab Tsh as is where is, WITHOUT putting into operation free loaded to truck